Synchronization Panels / Synchronized Control Panels Dealers

Fully automatic synchronizing panels operated by microprocessor-based relays. AMF, Auto synchronizing, Manual synchronizing, Auto load sharing, Active & Reactive power management with protection such as U/V, O/V E/F, O/C IDMT, Reverse power etc. Load balance metering such as Ammeter, Voltmeter, KW, PF, KWH, Double. Volt, Double Frequency Meter & Synchroscope etc. COLD FORM LAMINATE (Alu-Alu Blister) is been represented as the new generation in pharmaceutical packaging, Material with - Best barrier performance at present which is Suitable for High-speed packing applications, Barrier to – UV rays, Moisture & Gases. SALIENT FEATURES: Load Manager, Power reverse protection Earth fault, filed lost control, auto manual synchronization, dual volt meter, dual frequency meter, all comes in a single panels. Automatic start and stop of the generator and changeover the EB/generator lines Auto/manual selector is available Genset stop with delay of 3 min Hooter-alaram annunciation for fail to start Checklist to find the fault and to correct 4ST switch control for healthy start and stop of genset Manual start & stop switch Available with emergency stop switch Auto LLOP (Low Lube Oil Pressure) and (High Water Temperature) protections are available (LLOT & HWT Sensors-Relays are not part of this panel\provided with control wires and safety according to their generators standard

We are actively engaged in manufacturing and export of high performance DG Synchronization Panel which comes complete with Controlling & Protection Relays capable of synchronizing of more than one DG sets with Mains & DG and with necessary protections. The offered product is precisely designed and manufactured by utilizing optimum quality raw material and sophisticated technology. Furthermore, we offer this DG Synchronization panel in various technical specifications at affordable prices.

Synchronizing Panel works between two or more different power sources like DG sets to manage power supply. Synchronization helps in making different DG sets behave as a virtual single unit and eliminates subdivision of total load. It helps in transferring load from one unit to another as during service period, so that the unit requiring service can be easily shut off. In this way the critical load need not be interrupted and there is no production loss. During low load we can run any single unit, and synchronize more units as the load increases. This can be manual or automatic.

We manufacture best quality LT- Auto Load Sharing & Synchronizing Panels suppliers in Telangana and Andhra Pradesh. Synchronization panels are mainly designed and used to meet power system requirements. These panels function both manually and automatic synchronizing function for one or more generators or breakers. Synchronization panels are mainly designed and used to meet power system requirements. These panels provide manual as well as automatic synchronizing function for one or more generator breakers. They are widely used in synchronizing generators and offering multiplexing solutions.

We are offering synchronizing control panel. We specialize in offering an all-inclusive range of synchronizing panels. Our user friendly and easy to keep up panels can be expanded as per the requirements due to their flexibility. Our panels are integral with electrical governor system with the differences in voltage, frequency and phase angle set between grid and genset.

Our range of Load Sharing and Synchronizing Panels are manufactured by using high quality raw materials. These can be availed from us at the industry leading prices. These panels synchronize the different DG sets as per the load requirement of the system. If the load increases, it switches on the other DG sets on by one and synchronizes with the system automatically through PLT (Panel Logic Control) and when the load decreases below the desired level, it automatically disconnects the DG sets one by one and switches off as per the load requirement.              

We are offering AMF Cum Synchronizing Panel which is based on load in KW. Hence the actual sharing, starting, stopping & transfers are actual load dependent & not on any other unrealistic parameter like voltage, current. etc. Changing of scheme becomes very easy because of changes are made through software only. There is no changing of wires, adding of components like relays, contractors, which is very time consuming, cumbersome & requiring additional space. Along with KW sharing, KVAr sharing & PF sharing is very accurate, because of PLC programming. There is no possibility of any unequal sharing as regards KW, KVAr & PF. For any type of load addition or reduction, manual intervention as regards D.G.set operation is not required. However, in case of emergency manual override is possible. Special programmers using Real Time Clock (RTC) are possible. Because of KW dependent load sharing, optimum utilization of D.G. sets are possible. This increases D.G. sets efficiency & saves lot of fuel. D.G.sets are always tried to run with 80 % to 90 % load factor, where we get maximum efficiency of D.G.sets. This is easily possible with our system. We are well-known manufacturers of Automatic Mains Failure Panel including Protection for DG sets. It uses an advance technology to make an easy and trouble-free Gen set control. Basic Operation Cycle When there is mains supply, the AMF Panel will keep the load on mains, once the mains supply fails, the AMF Panel senses this and starts the Gen set. Once the Gen set is found running, the load is transferred to Gen set supply. When mains resume, the load is transferred back to mains supply and Gen set is stopped.   Advantages:  Our AMF panel is designed very simple that anyone can operate Programming the panel is easy to understand this does not need a technically expert person Power Distribution BoardWe are offering a wide range of power distribution board (PDB)that are precision designed for the power distribution in different sections of an industry, big building, etc. where only short circuit protection and overload protection are required. These protective devices can be fitted with different protective relays which can trip the CB against various types of faults.

Synchronizing panel will operate on an automatic mains failure system, so that when the main supply is interrupted on one or all phases (after an adjustable delay period) the generator sets will start-up together. After an initial warm-up period (adjustable) the generators will synchronize with each other by means of motorized circuit breakers or contractors onto a common bus bar. Next, the motorized change-over switch will be closed and the load will be connected to the main distribution box. The load share units continuously monitor the load and during low demand periods one or two generators will be shut down to save on fuel consumption. As demand rises again the second generator and third generator will be restarted, synchronized and reconnected to the load. When the AMF control unit detects that the main supply has been restored an adjustable observation period is activated before the main supply is reconnected. A cool down period will then follow, after which the generator sets will be shut down. Key features of General Control & Synchronization Panel: 3-pole or 4-pole system as required. Various combinations of load transfer by ACBs, MCCBs or contactors. Protection class up to IP 54. Load sharing/load shedding. Automatic and manual synchronizing. Factory built to client's specifications. Ratings up to 6000A.  Control functions available for engine monitoring, warm-up and cool down periods, emergency shutdown, multi attempt engine start control, and engine test runs. Total power can be received by this DG Synchronization Panel having synchronization between mains and DG or 2 DGs. With the help of technically advanced manufacturing techniques, we are manufacturing and supplying a precision engineered collection of panel under the observation of our highly experienced professionals using the finest quality components. Further, provided panel is checked on various quality parameters by our team of quality analysts to ensure its excellent functionality. This DG Synchronization Panel can be purchased from us at affordable prices.

One product that is broadly used in electronic, electrical and other related industries is a Synchronising Panel. Our advanced engineering makes our Synchronising Panels quite trouble-free in terms of its functioning or usage. You need not shed any extra cost for its maintenance but you are assured to get the best of performance at an extremely low price. Various electrical materials go in for the fabrication of our product. If you want a Chandigarh-based manufacturer, exporter and supplier, then order Synchronising Panels from us now.

DG Synchronization Panel offered by us is manufactured using superior quality components and the advanced technological processes. Designed adhering with the strict industrial norms, our DG Synchronizing Panel is available with both auto and manual control and is user friendly. Specially designed to meet power system requirements, DG Synchronizing Panel provides rated service voltage & frequency of 415 v & 50 Hz respectively. Contact us for more details.

DG Synchronizing panels are based on AutoManual Sharing, Auto Synchronizing, Auto KW & KVAR sharing & load-dependent STARTSTOP features. Changing of schemes is made through PLC & Software will work in line with the Generator Control Package Relay that also takes care of power monitoring, communication, display as well as protection.

Having domain expertise, we are capable of manufacturing, designing, installing and commissioning qualitative range of DG Synchronization Panel as per the demand of our esteemed clients. We provide DG to DG synchronization, DG to MAINS (GRID) synchronization and Reverse synchronization, based on load generation. Some of the specific features of our panel include, excellent components, perfect for varied industries, capacity to control various processes with accuracy, Optimum functionality, and manual as well as digital operation. Product Specifications : DG synchronizationDG automationAuto DG ON OFFAuto Mains Failure PanelParallel DG operationFeed back control in DGDG PLC systemFuel saving in DGDG Load sharingDG load managementDG efficiency improvement   Inspired by the ‘Make in India’ initiative and being categorized as one of the micro and small enterprises initiative under NSIC, we manufacture CPRI-approved DG Synchronization Panels that come with diverse features such as: Excellent componentsperfect for varied industriescapacity to control various processes with accuracyOptimum functionalitymanual as well as digital operationmade up of very excellent quality materialsequipped with all the latest technologies