Facing Machine Dealers in Focal Point, Ludhiana (13 products available)

Pipe End Facing Machine is used for the purpose of Chamfering and Deburring of the Pipe before Galvanizing and Threading Operation. Pipe is chamfered from the Outer, Inner and Front face by Three different tools. The Pipe remains Stationery and the Facing Head rotates. Slide Travels towards Facing Head for Chamfering manually. The Machine mainly consists of the following: - Bed  Head Stock  Clamping Vice  Saddle

we are offering pipe end facing machine the pipe end facing machine is used for the function of chamfering and deburring the pipe before the galvanizing and threading operation. The pipe is chamfered from the outer, inner, and front face by three different tools. The pipe remains stationery and the facing head rotates. Slide travels towards facing head for chamfering manually. We are counted among the prominent pipe end facing machine manufacturers, suppliers, and exporters. We offer pipe end facing machine at reasonable prices. consists of bed head stock clamping vice saddle » specifications model  no.imc-em- 12" to 1.12"imc-bm-12" to 4"min. Dia of pipe to be chamfered12" n.b. Pipe12"max. Dia of pipe to be chamfered1.12"4"cutting tools required (hss 10% cobalt)38"38"number of spindle speedstwo nos.four nos.range of spindle speeds37 to 64 rpm68 to 180 rpmmain motor3 h.p. 1440 rpm3 h.p. 1440 rpmapprox. Wt. Of the machine750 kgs.1100 kgs.

The packaging of our products is done using high-grade packaging material. Moreover, we are assisted with advanced machines and packaging experts for safe packaging of the products. We have hired quality auditors who keep a strict check on the quality of the raw materials and also check the inputs against varied quality parameters before procuring them.

• Model No.: NCT-E-1.1/2"
• Min. Dia of Pipe to be Chamfered: 1/2” N.B. Pipe
• Max. Dia of Pipe to be Chamfered: 1.1/2”
• Cutting Tools Required (HSS 10% Cobalt): 3/8”
• Number of Spindle Speeds: Two Nos.
• Range of Spindle Speeds: 37 to 64 RPM
• Main Motor: 3 H.P., 1440 RPM
• Approx. Wt. of the Machine: 750 Kgs.

We are a distinguished Manufacturer, Exporter, and Supplier of Pipe End Facing Machine from Punjab (India). Our Pipe End Facing Machine mainly consists of base, head stock, saddle and clamping vice. Before galvanizing and threading, pipes are chamfered from inner, outer and front face, and deburred with the help of Pipe End Facing Machine. Pipe End Facing Machine helps pipes remain stationery while the facing head of the pipe rotates. For manual chamfering, slide of the pipe moves towards facing head.

We are offering all types of Pipe End Facing Machine that are available from us at very nominal prices.

• Size (mm): 12mm to 65mm, 25mm to 105mm, 50mm to 155mm, 100mm to 205mm, 100mm to 406mm.
• Size in Inches: 1/2" to 2.1/2" , 1" to 4" , 2.1/2" to 6" , 4" to 8", 4" to 16"

Pipe End Facing Machine is used to Chamfering and Deburring of the Pipes before Threading operation and Galvanizing. The Job is chamfered from the External, Internal and Front Face Three different tools. The Job remains still and the Facing Head rotates. The Slide manually move towards Facing Head for Chamfering. -

Pipe Facing Machine, End Mill Cutters, Pipe Threaded Machine

The Pipe Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum Conditions of severe with minimum maintenance . all the necessary requirements are combined in this model to from the basic fundamentals of correct threading. All the gears are made of case hardened steel with extra large face with and tooth thickness and cut on hobbing machine for noiseless operation even at high speed. Naturally they are built with high standard of workmanship, material and quality so closely associated with COMPANY TRADITION .   Head Stock : The Head Stock is of top quality casting providing support to the spindle bearing. The Spindle Swing taper roller bearing are of best steel with a ground finish to give accurate results. Gears of head stock are running oil bath with oil level window . The Bed :The bed is pillar type having two pillar made of best steel , nicely ground & hard chrome plated and also aligned accurately to the head stock alignment . The saddle :The saddle is fitted on two pillars very precisely , it run on pillars very smoothly and accurately to the head stock alignment. The Apron :The Apron gives movement to the saddle towards head trevers along with pillars through steel rack and pinion arrangements. Its all gear are made of best steel. Vice Jaws:The Vice jaws are fitted on the saddle with best steel hard chrome plated rods accurate . The jaws are made of best steel and are well hardened . The movements of jaws are controlled by a screw on the saddle .

Piler Type End Facing Machine, HSS / Carbon Steel Machine Taps

two way facing machine, Centering Machine, copy turning machine

Facing Lathe Machines, Tool Room H Series Lathe Machine

Facing Machine, center facing machine, riveting machines

Pipe End Facing Machine, Bolt Threading Machine, pipe threading machine