Hi -Tech International Model Town, Ludhiana, Punjab

Zorb-IT desiccants are specially formulated dehumidifiers to control the relative humidity in the enclosed packaging system where damp environments can cause problems. The issues caused by excessive moisture can be corrosion in metallic and automotive components during storage and exports, fungal developments in textiles and garments,circuitry issues in electronic goods, mold development in leather goods, dampness in pharmaceutical products and tarnishing of brass,copper and silver. Due to the changes in temperature and volume of air, the moisture is sucked into the container by the process of container breathing. this moisture then condenses or gets absorbed resulting in a detrimental effect on the articles packed. Zorb-it helps in adsorption and retention of this moisture within the Zorb-IT Desiccant pouch.     USES     Zorbit desiccant pouches has are especially designed for usage in primary packaging of pharmaceutical products, medical devices, diagnostic kits and food products. Silica gel is full of tiny pores made from silicon dioxide and is a desiccant, which means it absorbs moisture from the air.   Zorbit unit pouches offers drying applications for packaging applications. The term unit is referring to as a bulk quantity of desiccant packets which can absorbs certain level of humidity and moisture from packaging environment. A “unit” mentions to a Military Specification for packaging. 1 Unit equates to 35 gram of desiccant. Zorbit offers wide variety of unit pouches from as low 1/16 units to 64 units for various applications

VCI Zip Lock Bags are used to pack components which need removal and resealing.  These are also used where multiple products are packed in a bag and then need to be used one by one over a longer time period.

VCI Foam is used to wrap parts which may be susceptible to scratches, dents along with corrosion.  VCI Foam provides cushioning effect with impact resistance.

Thickness : 1/3/5/7/10/20/50 mm

Dampness typically results in the growth of mold or mildew on wood surfaces. Mold usually appears as black or greenish-brown patches on surfaces in humid environments. Mildew is a common term used to describe both mold fungi and their discoloration to unfinished wood. Besides causing an unsightly appearance, spores from mold fungi can cause allergies and other health hazards. Concerns & various detrimental effects caused by wood rotting and fungal growth are: 1. Moisture absorption, creation and transfer onto components causing corrosion 2.Weakening of structures 3.Bad odour and smells created due to the aerobic & anaerobic molds and fungi 4. Poor aesthetics 5. Skin Infections to the workers handling the wood 6.Breathing problems & lung infections 7. Mouth Infections   Woodguard is solvent based biocide & fungicide which also eradicates rodents in wood. This is very safe compared to the azoles, nitrites, cresoles or any other harmful chemicals and is also used in food grain preservation at different ppm levels and for human dermatological infections. This can be applied by brush, dipping, or spraying on the surface of the wood and dries off within 4-5 minutes under normal conditions. The chemical doesnot discolour or stain the wood. However, it protects the wood from rotting, molds, fungal growths etc. For upto 2 years from application. In case the humidity increases or the wood become wets the efficacy of WoodGuard further increases and the chemical being water soluble travels to the inside of the wood and protects the complete volume and not just the surface  Coverage 1⁄2 Liter Covers 1 Pallet of 15 square meters or 1 wooden pallet of 40X40X40. Cost per wooden pallet = Rs. 75/Pallet @ 150/L basic Dreies off in 10 minutes after application

Application: 1. Galvanize wire 2. PC wire 3. Pre-strand wire 4. Stainless wire 5. Razor wire 6. Wire rod. Description:HTI-W series is mainly used to packaging of steel wire coil, copper coil... which is with highly efficiency and nice packaging for saving labor and material cost   Features: 1. PLC & HMI for automatic operation. 2. Special system for easy loading and unloading. 3. Manual and automatic working mode for easy operation. 4. The converter is adopted to adjust the speed of the ring and rollers. 5. Overlap of the packing tape according to requirement. 6. Automatic material cutting.                                                                      7. Guardrails, soft starts and stop for safety operation. 8. Height of the ring could be adjusted for different OD of the coil. 9. Packaging tension is adjustable by special breaker. 10. The rollers are wrapped by polyurethane for protect the surface of the coils. 11. Indicator alarms automatically when trouble occurs. Trouble can be shown automatically. 12. Special brake for the tape release device to avoid material folding. 13. Widely packing material applicable.

For Wire industry, HTI supply PC wire wrapping machine, G I wire wrapping machine, Prestrand wire wrapping machine, wire rod wrapping machine...The packing material can be...  

DESCRIPTION OF WINDOW WRAPPING MACHINE: Window wrapping machine is mainly used to packaging of board profile, door, window... which is with highly efficiency and nice packaging for saving labor and material cost. The machine can de designed according client's specification. It can be designed according different length, width and weight of the panel. The advantage of the window packaging by window wrapping machine:1. Energy save2. Material costs lower3. Easily maintaining.4. Automatic The disadvantage of the window packaging by window wrapping machine:1. Wrinkle in the surface of the package caused by stretch film.2. Two sides can't be sealing.  FEATURES OF WINDOW WRAPPING MACHINE: 1. Automatic operation, which can be connected with production line.2. Widely packing material available.3. Manual and automatic working mode for easy operation.4. The converter is adopted to adjust the speed of the ring and rollers5. Overlap of the packing material according to requirement from 20%-80%.6. Packaging tension is adjustable by special breaker.7. Guardrails, soft starts and stop for safety operation.8.Central positioning for the best packaging9. Indicator alarms automatically when trouble occurs. Trouble can be shown automatically.10. Automatic material cutting and feeding for automatically operation.Note: Can be designed according your specification.    HTI offers a wide variety of packaging equipment that covers a broad range of coil object. Browse our entire range of solutions by selecting the areas that are right for you.By machine - Door Packing Machine or Board Shrinking Machine Find the right solution to fit your needs by selecting the type of machine you are interested in. By industry 

Window shrinking machine is a automatic shrinking machine for window, door, wooden with three sides sealing and full sides packaging,... which is with highly efficiency and nice packaging for saving labor and material cost. The window shrinking machine can be equipped in many different ways and made for different products and capacity. Can also be delivered with edge cushion banderol which provides the package with good protection during transportation and storage.  FEATURES OF WINDOW SHRINKING MACHINE: 1. It is a automatic shrinking machine and it can be combined with another line for automatic packaging.2. PLC&HMI adopted.3. The solution availableincludes the packing materialn automatic feeding, sealing parts, material recover,shrinking…4. Full sides shrinking packaging with nice surface.5. Sensors adopt for inducing the products for fix the position.6. Two feed-in modes, auto/manual for easily operation,7. PE or POF film can be choosing with three sides automatically sealing.8. The different collocations device for different products.9. Constantly high temperature film heat sealing system for all industrial standard shrink films in the market such as PE. PVC. POF etc .10. The width of sealing is adjustable for different products.11. The front feed speed is adjustable according different packaging speed.12. Hi-speed hot air circulating system inside of shrink tunnel .13. Sealing system control by sensors, sealing temperature adjusted but PLC.   Parameters of floor board shrinking machine: 1.Sealing part 2.Shrinking part The window shrinking machine are available in many different sizes and can be connecting with picker, stocker, sealing station, turning table, assembly stations, pallets stacker and shrink tunnel etc. We will help you with separate machine or complete lines according specification. These model machines are custom made system for packaging of products with all kind of shrinking material by all sides sealing. The machine is an automatic operation in process, with automatic conveying of the product, sealing, and heat shrinking. The product will be well covered by covering station in first wrapping unit by packing material, and then moving to second position where the side of the pack will be sealed automatically. These units are designed upon the size of products and packing capacity requirement of the customer. The system is suitable for either for Independent packing or connecting with another machine for online packaging. The advantage of the floor packaging by window shrinking machine: 1. Nice packaging surface2. Material costs lower3. High speed.4. Full sides sealing5. Highly efficiency The disadvantage of the floor packaging by window shrinking machine:1. Power consume during 30-50KW/H.

RUST-X specializes in corrosion prevention products.  VIBROX  is a special  grade additive used for the vibratory machines and provides excellent washing, degreaseing, deburring and cleaning properties to provide shiny parts along with superior corrosion protection properties during in-process short term storage. The cleaning agents used are bio-degradable & the corrosion preventive agents ensure corrosion free storage. The chemicals present in Aquaflush lower the surface tension and prevent re adherence of particles to the components. The biocidal properties prevent development of bacterial or fungal smells in the operational facility. Application  Can be used in automatic vibratory machines.  Packaging Available 26 Liters Can & 210 Liters Barrel   Safety Information & Declaration  RUST-X Rust Preventive Oils donot contain Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr6), Polybrominated biphenyls (PBB), or Polybrominated diphenylether complying with the re-stricted substances listed in Article 4(1)of the RoHS Directive.  RUST-X Rust Preventive Oils are also REACH Compliant for exports to the European Union.  This Data sheet and information it contains is considered to be accurate at the date of printing. No representation or warranty, expressed or implied is made as to the accuracy or completeness of the data and information contained in this publication. It is the User’s obligation to evaluate and use products safely and within the scope advised in the data sheet and to comply with all applicable laws and regulations

PRODUCT CODE-VCI 707   VCI Zip Lock Bags are used to pack components which need removal and resealing.  These are also used where multiple products are packed in a bag and then need to be used one by one over a longer time period.

Tuffpaulin as the name suggests is a highly tough plastic film with very high puncture resistance, high tear resistance, improved tensile strength, higher dart impact strength, higher resistance to tear propagation, excellent moisture barrier and is used in highly demanding applications. RUST-X TUFFPAULIN VCI is specially designed product for the packaging of heavy equipment, armament, pallets, vehicles, automotive parts, engines, wind mills, power plant equipment, chemical plant equipment etc. Tuffpaulin is a 6 layered plastic film with pseudo thickness imparted to improve strength and reduce tear propagation.  RUST-X TUFFPAULIN VCI film provides better corrosion protection compared to using ordinary VCI Film and provides a single product with multiple features such as abrasion protection, movement restriction, water barrier as well as moisture barrier hence providing excellent option for long term preservation.  The TUFFPAULIN VCI film emits protective vapors, which have the tendency to neutralize the moisture as well as form a multi-molecular film on the surface of the metal and inhibit the electrolytic process of oxidation. The film is available as tube, sheet or in the form of 3-D covers to wrap the equipment suiting the size of the equipment or the pallet. The film is very tough and cannot be stretched or punctured easily. The film is transparent for ease of visibility of the part or equipment packed in it. METHOD OF USE Tuffpaulin VCI Film is available in form of 2 dimensional bags, 3 Dimensional Bags and covers or in the form of sheet. The product to be packed can be wrapped with RUST-X TUFFPAULIN VCI film and then heat-sealed using a continuous tong type heat sealer. This results in the formation of an enclosed atmosphere with highly inert atmosphere which resists rusting.

 The VCI Tuff tubes is applicable to ferrous metal, alloys steel, cast iron, copper, brass, bronze, plated metal zinc and its alloys, chrome and its alloys, cadmium and its alloys, tin and other metal materials and their products. The film has high strength and provides extremely good corrosion protection in the hollow of tubes.  

1 gm VCI tablets are compressed VCI chemical for protection of parts that require special advanced corrosion inhibition and for hard to reach spots where direct packaging cannot be used

The manufacturing of VCI Tablet is done by pressing the VCI Powder and mixed them with crystals that reduce fragility. Thanks to the small sizes, they can be easily positioned in the most hidden and difficult to protect points. They provide the mono-ionic protective layer to enclosed materials in containers,boxes,Plastic bags, Cartons etc which protects them from the corrosion and safe them from Rust.   APPLICATION   ·        Due to their small sizes, It is easy for them to protect the areas hard to reach. ·        These can be placed within heat transfer equipment tubes as well as equipment which is hollow and needs corrosion protection ·        They are ideal solution for automatic packaging. ·        They are particularly suitable for integrating and enhancing the anti-corrosive action of the RustX VCI products. ·        The inhibiting VCI molecules act by saturating the inside of the package and guarantee long-lasting and constant sublimation. PHYSICAL PROPERTIES

Availability : 1 gm

Solubility : Water Soluble

VCI stretch film contains Vapour Corrosion Inhibitor properties to provide anti-corrosion protection to stretch wrap packaging applications. Our VCI stretch films deliver cost effective corrosion protection to ferrous and non-ferrous metals, metal parts especially steel coils, wires, strips and tubes. 

RustX Strength Fabric is a woven fabric made on circular knitting machines from specialized high strength HDPE resin with dosages of UV protection and optical brighteners made from Virgin polymersThe fabric is woven on automatic lines to ensure adequate strength is achieved by a Warp and Weft structure of the material.Strength fabric by its name is symbolic to not just the advantage of High Strength but also excellent moisture penetrations properties and oxygen transmissions.It is laminated on both sides with Poly Ethylene of approx 20 gsm-25 gsm on each side with a hot lamination process and cannot be easily peeled off AdditivesRustX Additives are REACH Approved and ROHS Compliant. All additives are produced under supervision of chemists. PROPERTIES Strength Fabric is general white on the outside and blue on the inside unless there is a specific or customized colour preference by the client. Strength Fabric generally is available in 8x8 or 10x10 mesh which means there are 8 -10 HDPE fibers in each direction in a 1 sq inch area. It has an extremely low moisture peneteration and hence can be used for protection again rain, snow or water for longer durations. The double lamination both on inner and outer hence protect the package. Markings RustX product is printed with RustX logo and patent numbers. All packages are printed with manufacturing date and shelf life of product. StorageStore the product in cool dry place ideally inside a shed / warehouse with no exposure to direct sunglight, rain, moisture water and acidic environment and the product can be stored before use for upto 2 years. Protective life span In case the product purchase is VCI Strength Fabric - the product can provide optimum corrosion prevention for a period of upto 10 years. For a complete corrosion analysis and righteous application procedure contact info@rustx.net with your pictorial reference and process workflow. Safety This product is safe for human, ecological and environment. No labels or markings are required. Refer the MSDS for further details REACH CertificationRustX Prodicts are free from secondary amines and nitrosaines and comply with the TRGS615 . They are also free from heavy metals like Cd, Cr, Pb, Hg, Cu and Mo. RustX VCI films are in line with the EU directives 94/62/EC and 2004/12/EG Recylability This product can be shredded or granulated and falls under the classification LDPE04

VCI sheets and rolls are available in various sizes and can be used for wrapping large or small components or equipments and for covering corrugation/ honeycomb layers.  

Thickness :  50 to 500 microns

PRODUCT CODE-VCI 709   VCI Printed films have seen a growing demand in the auto industry especially for use in aftermarket spares. A great way to protect parts and brand your product.  Holographic films can also be embedded in the pouch to protect from counterfiet products.

Thickness : 75 to 300 microns

The PP Flute Boards or Polypropylene Flute Sheets have doubled wall profile extrusion that is joined by series of vertical ribs. It is a versatile product with worldwide applications due to properties of tough Polypropylene. It is impegrataned during manufacturing VCI Chemicals to help provide corrosion prevention to the steel parts placed in contact with the Corrugated Flute whilst providing cushioning, protection and abrasion resistance of metal. Owing to their high strength and durability, these VCI PP Flute Boards are highly demanded among the clients. The VCI Polypropylene Flute Sheets are recyclable, termite / vermin proof, water resistant, and durable. Advantages: High thickness to weight ratio making it one of the lightest packaging material Flexible Scratchproof Waterproof Abrasion Resistant Provides cushioning Impact resistant    Uses  Can be used to pack automotive components, electronics, glass ware, computers, machineries, plastic equipment etc.

Rust-X VCI Power Stretch Films are manufactured using state of the art SMP Technology for speedy moisture passivation and provides long term corrosion protection to the packaged parts. Rust-X VCI Power Stretch Films when stretched on metal products isolate the packed coils and sheets from influx of humidity and the VCI neutralizes the environment inside the package. VCI Stretch films are suitable for ferrous and non-ferrous metals and inhibit the onset of corrosion, tarnishing etc for up to 5 years when used with a complete system designed by Rust-X. Rust-X VCI Stretch Films are made from special proprietary additives that increase the strength between the molecular chain thereby providing a film with very high tear strength, tensile strength and dart impact.   METHOD OF USE AND SUITABILITY: The Rust-X VCI Power Stretch Films are easy to install in machines. Custom sizes, lengths, thicknesses and core ID’s can be provided. Rust-X Stretch film uses up to 50% less film to wrap the same load as today's standard films. In addition, the film provides improved corrosion protection without sacrificing load holding performance.   IDEAL FOR: · Wrapping metal coils · Wrapping galvanized sheets and coils · Wrapping tubes and wires · Wrapping electrical grade steel · Wrapping stainless steel · Wrapping copper and aluminum sheets · Wrapping metal bodies, engines, turbines, heavy equipment · Wrapping castings, forgings, sheet metal · Wrapping electrical panels, motors

VCI papers are used to protect components that require high shelf life and protection against corrosion. These have a high VCI chemicals carrying capacity and are useful in protecting components for longer periods and also provide better abrasion resistance compared to thin film plastics. Goods wrapped in or protected by RUST-X VCI paper are not affected by corrosion.  

VCI papers are used to protect components that require high shelf life and protection against corrosion. These have a high VCI chemicals carrying capacity and are useful in protecting components for longer periods and also provide better abrasion resistance compared to thin film plastics. Goods wrapped in or protected by RUST-X VCI paper are not affected by corrosion.

VCI NON-WOVEN DESCRIPTION  VCI non-woven fabric is made up of compressed PP fibres having much higher puncture resistance, scratch resistance, tear resistance, tensile strength as well as dart impact strength compared to Ordiary VCI paper. In a number of applications it is important to use a Non-Woven fabric in order to protect from sharp edges of the part as well as protruding parts which may puncture plastic or paper packaging. RUST-X VCI non woven fabric provides better corrosion protection with its protective vapors which neutralize the moisture as well as form a multi-molecular film on the surface of the metal and inhibit the electrolytic process of oxidation.   PACKAGING AVAILABLE  The fabric is available in rolls of 1500 mm or 1000 mm width and 250 meter length as well as in cut pieces custom or rolls of the required size. METHOD OF USE & APPLICATIONS The product to be packed can be wrapped in the part covering all surfaces of the component or can be placed above the packed components  •  Export and domestic packaging of expensive parts •  Electronic components & devices •  Steel coils wrapping •  Heavy equipment and flat stack packaging •  Pallet covers •  Precision scientific devices •  Interleaving of components & products METALS PROTECTED ·        Carbon steel ·        Galvanized steel ·        Stainless steel ·        Copper and alloys ·        Aluminum  and  Aluminum alloys ·        Silver ·       Solder Safety Information RUST-X products do not contain Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr6), Polybrominated biphenyls (PBB), or Polybrominated di-phenylether complying with the re-stricted substances listed in Article 4(1) of the RoHS Directive. RUST-X products are also REACH Compliant for exports to the European Union.   This Data sheet and information it contains is considered to be accurate at the date of printing. No representation or warranty, expressed or implied is made as to the accuracy or completeness of the data and information contained in this publication. It is the User’s obligation to evaluate and use products safely and within the scope advised in the data sheet and to comply with all applicable laws and regulations

Another alternate is with metal barrier protection that has an aluminium coated polyester with VCI LDPEcombination can be used in applications where high level of protection is required where VCI can protect parts in highly demanding areas. Aluminium Barrier and Metal Barrier Metbar Films have WaterVapor Transmission Rates of 0.1% compared to normal LDPE It gives Protection against moisture,oxygen transmission ,corrosion, physical damage,odor transfer,UV radiation,chemicals and has Good Asthetics and High puncture resistance. Corrosion is kept at a bay by maintaining humidity level below 40RH. It gives over all cost reduction by way of reduced desiccant/preservatives, packing case cost and rejections due to corrosion and spoilage of packed products. VCI MetBar 4100 - VCI Metalized Polyester film 100 microns thickness with one side metalized polyester and other side VCI LDPE blue colour for non food grade applications VCI MetBar 4150 -VCI Metalized Polyester film 150 microns thickness with one side metalized polyester and other side VCI LDPE blue colour non food grade applications VCI MetBar 4250 - VCI Metalized Polyester film 250 microns thickness with one side metalized polyester and other side VCI LDPE blue colour for non food grade applications