Jindal Fine Industries Dhandari Kalan, Ludhiana, Punjab

Dunlop Valve For Jointed Tube (Set of 7 Pcs)  A. Dust Cap B.Top Nut C. Plug with Rubber valve tubing D. Rim Nut E. Hexa Nut F. Bridge Plate G. Stem    

Made of crca strips  

Finishing : CP/Black

A-Single F/W openerB-Pedal SpannerC-Fork fitting SpannerD-Rim StreightnerE-Multi F/W Opener Spline typeF-Multi F/W Opener (Old Model)

Black/brown hard top with rear twisted coil springs tripple base wires available in PVC or Assembled base only.

ROLLER CHAIN 1/2" x 3/32 x 116 links 1/2" x 1/8" x 114 links BNP/Black

Made of steel 1/2 way grooves 38mm dia, in C/P finishNK-1 Nipple key 6 grooves one way 10-12-14/14-15/15 GNK-2 Nipple key 8 grooves one way 9-10-11-12-13-14/14-15 GNK-3 Nipple key 8 grooves 2 ways 10/10-12/12-14/14-15/15 G

MADE OF STEEL IN ROUND ORCHANNEL SECTION COMPLETE WITH OR WITHOUT REFLECTOR

All sizes available in C.P., Black and Plastified finished suitable for all sizes of chainwheels.

MANUFACTURED FROM LIGHT QUALITY 16G ERW 22.20MMSTEEL WITH BLACK/ GREY PLASTIC OR PVC GRIP   Raised pattern with double levers complete and expander bolt for centre pull brakes, black grips. Stem size 7.1/2".    

MADE OF QUALITY STEEL TUBES & STRIPSCOMPONENTS, BRAZED COLUMN WITH CROWN WITH B.C.P. THIMBLES, BLACK ENAMELLED, RED,GREEN, BLUE IN FLAMBOYANT COLOURS

MADE OF SPECIFIED STEEL PRECISELY MACHINES AND HEAT TREATED, FULL /HALF BALL, BLK/GOLDEN/B.C.P.FINISH : PITCH 1/2" X WIDTH 1/8"FOR SINGLE SPEED AND 3/32"FOR MULTI FREEWHEEL, 1.370 X 24BSCY OR M34.7 X 1 PITCH THREADING

MANUFACTURED FROM M.S. FORGING QUALITY STEEL, B.C.P/ BLACK FINISH Single Speed for Chain 1/2x1/8, 1/2x3/32. Sizes Available : A-28x3.1/2" or 5" B-32x4" or 5" C-36x4" or 5" D-40x5" or 6" E-44x6"or6.1/2"or7" F-46x6 or 6.1/2"or 7" G-48x6.1/2" or 6.3/4" or 7" H-52x6.1/2" or 6.3/4" or 7" With or without holes for chain Guard to specify Finish C.P. or black with or without plastic/steel guard as to order.

MADE CRCA STEEL STRIP 22G/24G BLACK ENAMELLED OR RED, BLUE AND GREEN FLAMBOYANT COLOUR OR B.C.P. CHAIN COVER QUARTER For roadster complete with fittings.    

Size : 20", 24", 26", 28".

CHAIN ADJUSTERS A-Open ends B-Close ends Suitable for 3/8, 11mm, 12mm Hub Axles complete With nuts & caps washers, Z/P finish

For OPC Swedish type S/O 10 Ball retainer Size 1/4x11 Thread : L-24 TPI/R-32 TPI With two cone.

Wheel Size : 26 x 2.125

MADE FROM QUALITY STEEL ROD PROPTO BE FITTED WITH CHAIN STAYS AND HUB AXLES. AVAILABLE IN BC.P / BLACK FINISH   SIDE STAND ROADSTER Rod prop B.C.P. finish with lock fitted to hub spindleSizes : 20" to 28"

A-Made of ERW tubes in straight pattern B-With Knarling Sizes available 5"-24" Sizes 25.4 x 22.2

SEAT CLIP BMX Complete with axle nuts & plates Z/P D-Seatclip 90x3 E-Seat axles F-Seat clam for MTB complete W/Nut & Bolt.

MANUFACTURED FROM CRCA COILS,POLISHED & B.C.P   RIM West Wood Pattern Sizes 1-28x11/2        Holes 2-26x11/2        32x40 3-24x11/2        32x40 4-20x13/8        20x20 5-26x2x13/4        32x40/36x36 6-16x13/8        20x20

MADE OF SELETED MATERIALS WITH 3.97 STEEL BALLS TOUGH RUBBER TO WITH STAND WEAR AND TEARWITH /WITHOUT REFLECTORS 9/16"X 20WW,14.1.25MM PITCH OR 1/2.20TPI 4" W/O Reflector Black Rubber bended edge plate.

MADE OF CRCA STRIPS WITH BOLTEDCHANNEL/ROUND STAYS AVAILABLE INC.P. /BLACK, ENAMELLED OR INRED/BLUE/GREEN FLAMBOYANT COLOURS AS TO ORDER   MUDGUARD RALEIGH TYPE With flag type stay and clip For roadsters, deep round profile single stay fastened. Wheel Sizes : 28" B.C.P./Black/Coloured

A-Lever for cantilever full Molded B-Lever for cantilever with steel bracket C-Lever for V Brake D-BMX Sheet Type Half Ball E-BMX Sheet Type full Ball F-Lever for French type G-Solid lever.

MADE OF PRESSED STEEL, CARBON CHROME STEEL BALLS FOR SMOOTHROTATION COMPLETE WITH HUBAXLES, NUTS, CONES, WASHERS, CHECK NUTS IN BRITISH/ FRENCHTHREADINGS FOR FREEWHEELB.C.P. FINISH. Open ends thick barrel Front axle 3/8 x 5.1/2 Rear Axle 3/8 x 6.1/2" or 7" or 7.1/2" Holes 20x20, 28x28, 36x36, 32x40 Hole gauge 10, 12, 14.

Finishing : Polished

Condition : New

Size : 25-30inch

Certification : ISO 9001:2008 Certified

Feature : Easy To Fit, Fine Finishing, Stylish Look

Thickness : 10-15mm

Warranty : 1Yr

Country of Origin : India

Material : Steel

Type : Bicycle Hubs