Drum Mix Plant Dealers in Mahesana

We Take the Pleasure in Bringing to You a High Quality Asphalt Drum Mix Plant, Which is Highly Appreciated By Clients all Over the World. the Customers are Additionally Eased with the Reasonable Rates of the Plant.

  We are Manufacturer of Asphalt Drum Mix Plant Since 1991. and we are exporters of Asphalt Drum Mix Plant, leading Supplier of Asphalt Drum Mix plants in India DRYER DRUM The dryer is accurately fabricated to ensure proper heating of aggregates with minimum heat loss. Specially designed flights lift and cascade the aggregate to reduce the final moisture content to 0.5% (by weight). It is supported on steel rollers through steel tyres with idlers and guide rollers and is provided with segmented driving sprocket. A fully automatic high-pressure auto jet burner is mounted at one end of the drum. The discharge chute design discharges heated aggregate directly onto the loadout conveyor. FOUR-BIN FEEDER It is of single chassis construction. At each Bin a radial gate is provided         which can be opened in any position to regulate the aggregate flow. Individual endless belts are provided below the gates to discharge material onto the gathering belt.   VIBRATING SCREEN A single-deck vibrating screen is provided on the slinger conveyor to remove oversize aggregate received from the 4-bin feeder. SLINGER CONVEYOR An inclined conveyor mounted on idlers receives aggregate from the gathering conveyor and feeds it to the dryer LOAD OUT CONVEYOR Mixed aggregate from the dryer drum is discharged on an inclined conveyor provided with a hydraulic hopper at delivery end for feeding the Mix into Tippers. BITUMEN TANKS One/Two Bitumen Tanks of 15/20/30 MT capacity each are provided, fabricated from steel plates with 50 mm glasswool insulation, manhole, thermocouples, etc. Bitumen is pumped to the dryer drum through pipe lines. Tanks are fitted with independent on-off type burners. MULTICYCLONE EXHAUST The dust collection system consists of enclosed multiple cyclones, exhaust fan and chimney. MINERAL FILLER Fabricated from steel plates, it feeds the required quantity of mineral to the drum. CONTROL CABIN A fully automatic control panel with feather touch controls is provided for controlling the quantity and quality of production with operator sitting in Air-conditioned comfort. All systems are completely synchronized with automatic / manual control of burners, load cells, mix temperature, cold feed / mineral / bitumen proportions, etc. Manual control is possible through over-ride system. Adequate safety measures are adopted to avoid overloading, short-circuit, etc. LDO TANK One LDO Tank of 2000 / 4000 Ltrs. Capacity is provided with each plant. OPTIONALS • Wet type air pollution control system. • Baghouse filter system. • Hot mix storage silo. • Portable plants.

Asphalt plant is also known as asphalt drum mix plant, hot mix plant, continuous asphalt type plant, parallel flow type etc. Asphalt plant works on the principal of mixing aggregate with bitumen/asphalt at certain temperature to give a proper mix for paving. The range of AADESH ASPHALT DRUM MIX PLANT Start from 20TPH to 150TPH, available in both mobile and stationery models. An Asphalt plant is an intelligent assembly of mechanical and electronic equipment where aggregates & minerals are blended, dried, heated, and mixed with asphalt to produce hot mix asphalt (HMA) meeting specified requirements of road building. The Asphalt Plant is made up of high quality steel & rugged design to give high performance for long time without compromising on the quality of produce/mix with high fuel efficiency , Hence enchasing the profit earning of the customers.   The Asphalt Plant Consist of: Cold Aggregate Four-Bin Feeder Single Deck Vibratory Screen for oversized material removal Slinger (Cold) Conveyor Dryer Auto Burner Drying Cum Mixing Thermo drum with Dust Collector Load out conveyor with Gob hopper Asphalt Tank Mineral Filler Unit Centralized Control Panel with insulated Cabin Fuel Storage Tank Fuel Storage Tank

The Sweeper is constructed from pressed steel shell which give excellent strength to weight ratio. It is a tractor mount sweeper driven from the tractor PTO shaft and is available with small debris collector box and water spray equipment as optional. The sweeper is designed for use with almost any tractor which is fitted with hydraulic lift, three point linkage and power take off and can be fitted or detached in less than five minutes. Brush sections are supplied in crimped steel wire or polyproplyene and are easily replaceable. The castor wheels fitted to the rear enables the sweeper to follow road undulations. The sweeper may be used to sweep straight ahead (for collection) or in two angled positions either side. The splash guard fitted to the sweeper is easily removed the allow the collector attachment to be bolted into place.   FEATURES   Steel wire, polypropylene or combination brush section. Rigid pressed steel shell. Easily adjusted for brush wear. Different lengths available to special order Optional water tank and sprinkler attachment.

Drums mix asphalt plants have confirmation for MORTH specifications. We designed maintenance stations and less fuel efficient and low. For Our MDM plants have a strong structure and precision quality. Our mobile asphalt drum mix plants ranges are from 25 to 120 TPH TPH.

The Sweeper is constructed from pressed steel shell which give excellent strength to weight ratio. It is a tractor mount sweeper driven from the tractor PTO shaft and is available with small debris collector box and water spray equipment as optional. The sweeper is designed for use with almost any tractor which is fitted with hydraulic lift, three point linkage and power take off and can be fitted or detached in less than five minutes. Brush sections are supplied in crimped steel wire or polyproplyene and are easily replaceable. The castor wheels fitted to the rear enables the sweeper to follow road undulations. The sweeper may be used to sweep straight ahead (for collection) or in two angled positions either side. The splash guard fitted to the sweeper is easily removed the allow the collector attachment to be bolted into place. FEATURES Modern Wet Mix Macadam Technology. Produces High Quality Mix. Portable or Stationary. High Production Rate. Highly Accurate Aggregate & Additives Feeder. Easy to Operate.   4-BIN FEEDER It is of single chassis construction. At each Bin a radial gate is provided which can be opened in any position to regulate the aggregate flow. Individual endless belts are provided, below the gates to discharge material onto the gathering belt. VIBRATING SCREEN A single-deck vibrating screen is provided on the slinger conveyor to remove oversize aggregates received from the 4-bin feeder. SLINGER CONVEYOR An inclined conveyor with 600 mm wide belt mounted on idlers receives aggregate from the gathering conveyor and feeds it to the pug mill. PUG MILL A twin shaft pug mill mounted on antifriction bearing provides quick, continuous and homogeneous mix of aggregates and additives. WATER TANK One / Two Water Tanks of 15 / 20 MT capacity each are provided, fabricated from steel plates with manhole, flowmeter, pump etc. MINERAL FILLER Fabricated from steel, it feeds the required quantity of additives to the pug mill. CONTROL CABIN A fully automatic Control Panel is provided for controlling the quantity and quality of production with operator sitting in Air-conditioned comfort. OPTIONAL Variable Feeding Device can be provided for Belt Feeder. Wet Mix Storage Silo.    

A trusted name in the industry, we are offering Drum Mix Plant that is highly functional and features minimal operational cost. Automatic drum mix plant is designed and engineered to give trouble free performance with increased fuel efficiency and is widely used for mixing various road construction materials. Our range of machines require less maintenance and are also easy to operate. These plants are available with fully insulated control cabin fitted with air conditioner and micro processor based electronic control panel having feather touch controls, totaliser and printer. Customized solutions are also provided as per the requirement of clients.

We present a comprehensive range of drum mixers, asphalt drum mixers, drum mix plant, asphalt drum mix plant which are able to perform accurately. These are precision engineered through state of the art technology and can be easily operated. Our ISO certified range of drum mix plant includes drum mix plant -45 (40-60 TPH), drum mix plant -50 (60-90 TPH), drum mix plant -60 (90-120 TPH) etc. Capable of working efficiently in adverse conditions, our range of drum mixers are made by our expert engineers using state-of-the-art technology. Assuring the clients of higher output, our range of machines are require less maintenance and are also easy to operate.

We make available Drum Mix Plant which is reckoned for its make and long service life. Owing to immense experience in this domain, we became efficient in providing quality Drum Mix Plant. Buyers can rely on us for the best in line products as we prepare them using the finest grade raw material and modern techniques. Also, the basic material is sourced from the reliable places.

Mobile Drum Mix Plant, Asphalt Drum Mix Plant, Fog Seal, Mechanical Broo

Mini Asphalt Drum Mix Plant, Road Construction Equipmen

Himalaya engineering company is offering asphalt drum mix plant. Our range of products include asphalt drum mix plant such as drum mix plant, mixer plant and automatic asphalt drum mix plant.

Asphalt Drum Mix Plant, Asphalt Drum Mixing Plant, Mini Bitumen Spraye

Asphalt Drum Mix Plant, Bitumen Tank, Mechanical Broome

Drum Mix Plants, Control Cabi

Drum Mix Plan

Asphalt Stationary Drum Mix Plant, Construction Equipmen

Asphalt Drum Mix Plant, Fully Automatic Concrete Canal Pave

Asphalt Drum Mix Plant, Road Construction Equipments, Asphalt Paver Finishe

Drum Mix Plant DM 45, Truck Mounted Bitumen Sprayer, Wet Mix Macadam Plan

Asphalt Drum Mix Plant, Bitumen Tank, Electric Control Pane