Industrial Paint Dealers in Mehsana, Mahesana (16 products available)

DURACERAM® is perfect for applications where there is a high need for temperature resistance such as woks, iron sole plates and curling irons DURACERAM reaches a previously-unheard of pencil hardness of 8-9H, while still maintaining excellent heat resistance properties and moderate nonstick properties DURACERAM can be applied on various metal substrates with light grit blasting, and its low baking temperature provides great energy and cost savings. DURACERAM meets the FDA standard 21CFR 175-300 as well as all ROHS standards

We are a well-known Manufacturer and Supplier of Wall Touch Putty from Vijapur in Gujarat. Wall Touch Putty (Wall Putty) is a white cement based polymer modified wall putty specially developed as a finish coat to cover unevenness and pinholes in plastered surfaces and to make the walls / ceilings ready for painting. As it is white, it can be treated as a base coat for painting.   Area of Applications : Wall touch specially developed as a finish coat to cover unevenness and pinholes in plastered surface and to make the wall/ceiling ready for painting.   Features & Benefits : Excellent Whitest putty Highly water resistant Strong bonding to the base plaster Excellent smooth finish Excellent workability UV Resistance True color tone of the paint is maintained, primer is not required Protects expensive paint from dampness, peeling off and flaking Makes paint durable Paint finish is superior Suitable for interior as well as exterior Reduces paint consumption Avoid frequent repainting cost effective Aesthetic look for ceilings, interior and external walls Ease of use at site   Method Applications : Dampen the surface to be plastered with clean water. Allow excess water to drain off. Using a steel trowel/blade, apply the above mix to a thickness of about 0.5-1 mm level and smoothen the surface. Apply the second coat 0.5-1 mm after the first coat has fully dried and set. In areas of high temp. and low humidity for two days is recommended. The thickness of each coat should not exceed 1mm and total plaster thickness should not exceed 2mm Smoothen with a steel trowel, Sand paper if so desired with 600no. Of sand paper   Test Result of Wall Touch Pot life 115 min Whiteness 90% + Autoclave expansion Nil Workability good.   Application Mixing : Take 300-400 ml of clean water for 1Kg of WALL TOUCH (Wall putty) in a clean bucket. It is very important that Wall Touch to be Added in water and not vice versa. Stir continuously by using an electric mixer or by hand to obtain a homogeneous lump-free paste. Allow the resultant paste to stand for about 10 min. for the additives to dissolve Re- mix again for about 2 min. the mixture is now ready Use the mix within 1Hrs   Packing : 20kg, 40kg BOPPE Export quality bag.   Coverage : We recommend : Maximum two coats (Layers) of Wall Touch. Minimum thickness of 1st coat (Layer) 0.5 to 1mm. Maximum thickness of 2nd coat (Layer) 0.5 to 1mm. Total thickness can go up to 1 to 2 mm in 2 Layers.   Precaution & Limitation Although wall Touch do not contain any toxic material, use rubber gloves while mixing Precaution should be taken to avoid dust inhalation while handling putty powder or during removal of application makes with fine emery paper-say wearing nose mask. Keep the product out of reach of children. Once putty paste has hardened, it shall not be used by adding water.   Shelf Life & Storage : Factory sealed bag of this product are guaranteed to be fist quality for Six month * if stored off the ground in a dry area. Store in a cool & dry in unopened condition away from direct sunlight   Other Products Categories Available : Brings the widest range of Construction Material & Chemical.

wood finishes, Decorative Paint, Distemper, exterior wall finishes products

• Color: White
• Name: SPARROW WALL PUTTY
• Usage: wall putty is a unique formulation of white cement and high performance chemicals

SPARROW WALL PUTTY This wall putty is a unique formulation of white cement and high performance chemicals and polymers which can be applied on damp as well as dry surfaces. Description Packaging : 40 kg, 20 kg  Coverage : SPARROW Wall Putty covers approx. 16 to 20 sq. ft. per kg for 2 coats, maintaining a maximum thickness of 1.5 mm on smooth plaster surface. Color : White Certification

Paint, Casein, Technical Acid Casein, Edible Acid Casein

Lacquer

green cement

Styrene Acrylic Emulsion

Mdc Solvent, Tetrahydrofuran

Industrial Paints

Automotive Paints, Industrial Paints, water base paints, Emulsion Paints

oil paints

textile pigments, leather

Deep Seal Epoxy Zinc Chromate Primer, Mortar Plastising Additive

Paint, Graphite Products, Pencil, Lubricant, foundry flux