Milling Machine Dealers in Gidc, Mahesana

We provide the clients with a proven range of Wet Mix Macadam Plants that is used in construction industry. These Wet Mix Macadam Plants are appreciated for their special design and longer working life. We offer Wet Mix Macadam Plants that are manufactured using advanced technology.

uis sit amet orci et lectus dictum auctor a nec enim. Donec suscipit fringilla elementum. Suspendisse nec justo ut felis ornare tincidunt vitae et lectus. Responsive Design Built with LESS Font Choosers Replaceable Background Image Custom Module Widths All Module Extensions Included

performance himakshi tailboard chipping spreader is designed to give a fast, accurately controlled application of surface dressing chippings, coated chippings and other materials on to all types of roads. The unit is designed for easy fitting to most tipping truck bodies, and is available in the following two models. 2.25m (7" 4") spreas 2.25m (8" 3") spreas each model is available with an optional quick release scatter plate, which extends the spreading width by 0.5 m (20") giving 2.75m(9') or 3.0 m (10')spread       variation in the spreading width can be achieved infinitely, from zero to maximum, by use of a lever controlled taper door control of the desired coverage is by a screw adjusted rubber gate mounted above the feed roller. Large foreign bodies pass through without causing damage. A metered application results by using spring loaded drive wheel, that automatically contacts the road surface as the body is tipped to the working position, and rotates the feed roller relative to ground speed through an operator controlled dog clutch. The main body design now incorporates a large throat with an adjustable battle to suit the different flow characteristics of the material to be spread. To further assist the flow and to material to be spread. To further assist the flow and to break up lumps of coated chippings, an optional agitator is available for fitting in the throat. when required a full width operator platform can be specified as an optional extra. This allows the operator to ride with the machine and operate the controls in greater safety. specification weight of 2.25 m model - 650 kg. (approx). weight of 2.2 m model - 700 kg. (approx). body constructed form 4mm pressed steel plate with hollow square and rectangular reinforcing cestions and channels. feed roller serrated surface feed roller constructed from 165 mm (11/2") diameter tube mounted between self aligning lubricated for life bearings. baffle (to control material surge) bolt on variaable position battle plate. adjustable from 100 mm to 250 mm in 50 mm increments. feedgate adjustable gate with hand operated adjusting screws. Bottom section of gale in rubber to permit passage of oversize objects without damage. note: for possible applications other than surface dressing the gate is removable. feed opening: 50mm(2") feed gate fitted: 75mm(3") feed remove cut off door (width of spread) infinitely adjustable from zero to maximum by lever controlled taper door, when baffle is either of its two lowest settings. When the baffles are in the two highest settings and depending on the material being spread, the cut off minimum width will vary. drive a 457 mm x 178 mm (24" x 7") pneumatic tyred wheel tansmits drive from the road surface through a 19 mm (3/4") chain drive from the road surface through a 19 mm (3/4") chain drive to a cast iron / m.s dog clutch. Mounted on a lay shaft. The drive is then transmitted through this shafts to a chain drive fitted to the feed roller. All shafts are mounted on self aligning, self lubricating ball bearings, with the clutch operated by levers either side of the unit. The roller chain drive is fully enclosed in a heavy duty guard designed to self clean. The drive wheel position is adjustable to suit truck bed heights down to 1100mm (43") optional extras platform platform with stand rails and across step either side. Weight 77 kg. (170lbs) agitators heavy duty tube with high tensile tongues, mounted in self aligning, self lubricated bearings. Chain drive from existing roller drive. Weight 11 kg. (24lbs)(approx). scatter plate a quick reales unit designed to exrend the existing width of spread uniformly by 0.5 (20") setting angle variable to suit chipping size and flow characteristics. For travelling the scatter plate the scatter plate ends can be foled in to reduce the machines overall width. weight 55kg. (121 ibs) (approx)

4-Bins for cold aggregate feeders are all-welded and modular in construction, permitting easy addition of bins to meet growing needs. Steep bin-walls and valley-angles allow free flow of aggregates from the feeders minimizing hold-up of materials in the corners and bridging with sticky aggregates. There is a bin vibrator mounted on walls of dust bin. The bins are supplied with adjustable calibrated gate openings and variable speed feeder drives together offer a total proportional control, greater flexibility and accuracy of operations. Belt scrapper perfectly cleans wet dust stick on return belt of gathering conveyor.

We offer superior quality Stationery Wet Mix Plant to the clients. Our Stationery Wet Mix Plant is manufactured using best quality parts & components and has very high capacity ranging from 60 tons to 250 tons per hour. This Stationery Wet Mix Plant is easy to operate and offers smooth service for years with low maintenance needs.

We make available Wet Mix Macadam Plant at market leading prices. We allow our patrons to make payment through a variety of methods. We are comfortable with patrons making payment through online or offline mediums that are legal and trusted. With stern quality examinations on varied stages of deigning and manufacturing, even the raw inputs used are completely examined by the professionals. This helps us in delivering the finest array of products with complete precision.

Aadesh offers a stationary plant Automatic Wet Mix Macadam (Soil stabilization plant) for achieving homogeneous mix material to prepare base and sub base of highway construction projects. WMM our plants have a robust and accurate quality. Our wet mix plant ranges are from 60 TPH to 300 TPH.   Continuing the tradition of excellence in providing automatic road construction machinery, designed Rhino Wet Mix Plant(Plant Soil Stabilization) to achieve homogeneous mix material to prepare base and sub base in road construction projects. Designed to tackle the toughest job requirements and high reliability to meet specific customer needs, Wet Mix Plant ranging from 100 to 200 TPH TPH can be adapted as needed. Stabilization cement (CTAB) system and optional accessories can be provided as per requirement.

Sidharatha Chip Spreaders offer: More capacity, More control, More productivity and More dependability.   Features include: 1) Exclusive power sliding seat and control module. 2) Exclusive Etnyre switch on-the-go truck hitch. 3) Dependable planetary axle with service brakes. 4) Powerful diesel engines, four models to choose from. 5) Efficient hydrostatic drive. 6) High capacity 24" conveyor belts. 7) Seamless speed control zero to full throttle. Exclusive Etnyre Variable Width Hoppers change spread width on the move.The variable width hopper hydraulically extends and retracts while spreading to cover the entire road and shoulder in one pass. The hopper width is adjusted with a switch in the hopper controls located at the driver's seat and the right front station. Two independant spread hoppers work in unison. Width is variable on the left side, right side, or both sides at once.The 18' spread hopper retracts to under 10' with the flip of a switch and is ready for transport only seconds after finishing a job. Hopper is available in four sizes. Individual one foot power gates give the variable hopper flexibility and increases productivity.

Road Construction Equipment, Hydraulic Broomer, Four Bin Feede

Road Cleaning Machine, Bitumen Sprayer, Road Construction Equipment

For our purchasers in Mahesana(India) and other marketplaces, we supply a wide array of the product at the lowest prices. Renowned for our outstanding patron care support, we have become a distinguished supplier of Road Construction Equipment in the market.

We are one of the reliable manufacturers and exporters of kerb laying machines which are used for laying concrete kerbs through the extrusion process. Our range of concrete kerb laying machines and industrial kerb laying machines are extremely user friendly and are appreciated globally. These are fabricated from state of the art technology and are widely applied in various construction industries. technology and are widely applied in various construction industries. We manufacture compact slipform paver for kerb laying applications. This machine is suitable for laying median kerbs, kerb and gutters (channel section). Some of the highlights it includes are:  Mounted on steel tracks to ensure maximum stability and gradability Completely dedicated drive pump with world class torque hub and heat treated sprockets ensures total operational reliability Hydrostatic drive ensures lower maintenance and smoother operations city range World class hydraulics and components offer unmatched performance Fully proportional automatic electronic controls Suitable for a wide range of concrete slumps Ease to operate and maintain Quick change mould design

We manufacture Wet Mix Plant (160 TPH) in compliance with industrial standards. Our Wet Mix Plant is ISO certified and is greatly in demand by clients. The Wet Mix Plant is durable and committed to functionality. Our range of product is used for base & sub base. They are best known for their higher production and low cost. This Wet Mix Plant is available in fixed or variable speed drives. It consists of adjustable gates at its bins and have weather proof control panel. Features High production rateEasy to operateModern Central Mix Stationary/Mobile PlantHighly accurate aggregate feeders

Road Construction Equipments, Automatic Fly Ash Bricks Plan

FEATURES Modern Wet Mix Macadam Technology. Produces High Quality Mix. Portable or Stationary. High Production Rate. Highly Accurate Aggregate & Additives Feeder. Easy to Operate.   4-BIN FEEDER It is of single chassis construction. At each Bin a radial gate is provided which can be opened in any position to regulate the aggregate flow. Individual endless belts are provided, below the gates to discharge material onto the gathering belt. VIBRATING SCREEN A single-deck vibrating screen is provided on the slinger conveyor to remove oversize aggregates received from the 4-bin feeder. SLINGER CONVEYOR An inclined conveyor with 600 mm wide belt mounted on idlers receives aggregate from the gathering conveyor and feeds it to the pug mill. PUG MILL A twin shaft pug mill mounted on antifriction bearing provides quick, continuous and homogeneous mix of aggregates and additives. WATER TANK One / Two Water Tanks of 15 / 20 MT capacity each are provided, fabricated from steel plates with manhole, flowmeter, pump etc. MINERAL FILLER Fabricated from steel, it feeds the required quantity of additives to the pug mill. CONTROL CABIN A fully automatic Control Panel is provided for controlling the quantity and quality of production with operator sitting in Air-conditioned comfort. OPTIONAL Variable Feeding Device can be provided for Belt Feeder. Wet Mix Storage Silo.  

FEATURES Modern Wet Mix Macadam Technology. Produces High Quality Mix. Portable or Stationary. High Production Rate. Highly Accurate Aggregate & Additives Feeder. Easy to Operate.   4-BIN FEEDER It is of single chassis construction. At each Bin a radial gate is provided which can be opened in any position to regulate the aggregate flow. Individual endless belts are provided, below the gates to discharge material onto the gathering belt. VIBRATING SCREEN A single-deck vibrating screen is provided on the slinger conveyor to remove oversize aggregates received from the 4-bin feeder. SLINGER CONVEYOR An inclined conveyor with 600 mm wide belt mounted on idlers receives aggregate from the gathering conveyor and feeds it to the pug mill. PUG MILL A twin shaft pug mill mounted on antifriction bearing provides quick, continuous and homogeneous mix of aggregates and additives. WATER TANK One / Two Water Tanks of 15 / 20 MT capacity each are provided, fabricated from steel plates with manhole, flowmeter, pump etc. MINERAL FILLER Fabricated from steel, it feeds the required quantity of additives to the pug mill. CONTROL CABIN A fully automatic Control Panel is provided for controlling the quantity and quality of production with operator sitting in Air-conditioned comfort. OPTIONAL Variable Feeding Device can be provided for Belt Feeder. Wet Mix Storage Silo.

Chips Spreader, Copper Ore, Copper As

Wet Mix Macadam Plant, Drum Mix Plant DM 45, Truck Mounted Bitumen Spraye