Holiday Detector HD-05
Get Price Quote
Holiday test machine model HD 05 DC holiday detector has range of 0-5KV DC. Holiday Detector is portable fully digital holiday detector is used for quality control inspection instrument. It is used to electrically locate and fault find in defects of protective coatings. Audible and visual alarms are activated when a flaw is detected using holiday detector rubber brush and electrodes. This makes holiday detection procedure very easy and operator friendly. Holiday test for pipe holiday detector is suitable for all types of coatings like fusion bonded epoxy, coal tar epoxy, paints, polyester, polyurethane, pipeline tapes, heat shrinks and asphalt. Holiday tester is versatile unit can be used to inspect protective coatings applied to pipelines, tanks, pilings, fire lines or buried pipelines of conductive surface. Holiday test method is very simple. A test voltage is applied to the coating by moving a brush probe across the surface and where there is either a pinhole or flaw the voltage will spark through the coating at the flawed location a red flashing indicator will flash and an audible alarm will sound the detected flaw can now be marked for subsequent repair and testing resumed for the remaining surface area, if no flaws are detected the test will therefore be non-destructive test method.
Lorgnette Pinhole Occluder
Get Price Quote
100 Piece (MOQ)
These Occluders are made from a high impact plastic that can withstand multiple uses and cleanings. Each Occluder includes a riveted pinhole flipper. Occluder can be used for covering either eye. These Occluders are great for anything from studies to clinical exams. Occluder includes a nose piece for accurate positioning. Features : Multiple pinhole flipper made of high impact resistant plastic. Angled handle to keep hand away from face during use. Can be sterilized with any non-solvent based germicide.
Best Deals from Elcometer Instruments
SS DENSITY CUP
600 Per 600 Litre
We “Durva Enterprise” are a renowned manufacturer of premium quality range of Retort Equipment, Laboratory Jack, Nickel Crucibles, Density Cup, Filter Holder Assembly, etc.
Cross Hatch Cutter
1,000 Per Piece
With us, one can stay completely assured for safe and dependable payment procedures. Our warehouse is installed with advanced machines and all required amenities ensuring safe storage of diverse kinds of products requiring different storage temperatures and conditions. Our Cross Hatch Cutter has multi blade cutter spacing 1mm, 2mm, 3mm, etc.The Cross test is used to access adhesion of paint coatings. According to coating thickness select a suitable model. Useful for Flat surface 1 mm model 11 Blades ( Coating up to 60 microns) 2 mm model 6 Blades ( Coating 60 – 120 microns) 3 mm model 5 Blades ( Coating 120 – 250 microns) Standard : ASTM D 3002, 3359 & IS
density cup
1,500 Per Piece
5 Piece (MOQ)
Weight per liter Cup/Density Cup – Stainless steel Precision instrument for determining the specific gravity (Density) of paints coatings, lacquer, pastes, semi pastes, and other liquid or semi liquid materials and similar products. This instrument consists of a cylindrical container and cover with a hole for excess liquid to be overflown, as per IS: 101 capacity 100 ml . Details: Pycnometers are used to determine the specific weight per unit volume of a liquid at a given temperature. Made from Stainless steel material Supplied with top cover (Lid) with small hole As per IS: 101 capacity 100 ml
Holiday Detector
Get Price Quote
Features: Display of output high voltage directly Clear LCD with blue backlight Switch off automatically State of charge indicator HD-60(A): Mainly used for the antisepsis of Pottery HD-60(B): Mainly used for petroleum pipeline(High voltage) HD-90: Displays holidays of antisepsis coating on two digital tube
Surface Finish Comparator
10,990 Per Piece
Jeep Meter
30,000 Per Piece
PULSE HOLIDAY DETECTOR
50,000 - 60,000 Per 5kg
Cross Hatch Cutter Handle
6,500 Per Piece
1 Piece (MOQ)
Cross Hatch Tester
Get Price Quote
The cross hatch tester tape is in accordance with ASTM D3359 specification . This tape along with the cross hatch tester is used for checking the adhesion of the paint coating after making the insertion with the cross hatch tester. You need to apply the pressure sensitive tape and remove it to get the cross hatch pattern. Looking at this pattern you can come to a conclusion as to the adhesion of the coating.
Holiday Detector VHD
Get Price Quote
Veer electronics presents the superior quality holiday detector. The holiday detectors are fabricated using the superior quality electronics components. The holiday detectors come with the latest techniques and features that make them outstanding from other products available in the market. The holiday detectors are available in various types to suit client�s needs and specifications. The holiday detectors are accessible at the market-leading prices. features portable size insulated box (acrylic material) analog readout for voltage setting regulated output voltage warranty one year against manufacturing defects (ex works, not at site) built-in automatic battery charger circuit calibrated and tested as per is:1876 assured quality which complies iso 9001:2008 types holiday detector pin hole detector high voltage tester high voltage insulation tester pipe coating tester
Cross Hatch Cutter
Get Price Quote
The “Cross Hatch” test is widely used in various forms to assess adhesion of paint coatings. The cutter has advantages over single cutting blades for both safety and simplicity in use, available with 1, 2, or 3mm spaces between cutting edges. Complies with BS 3900; E6, ASTM D 3359, BS/DIN EN ISO 2409 :- 750/1 1mm spacing – 6 blades (coatings up to 2.5 mils) 750/2 1mm spacing – 11 blades (coatings up to 2.5 mils) 750/3 1.5mm spacing – 6 blades (intermediate version) 750/4 2mm spacing – 6 blades (coatings from 2.5 to 5 mils) 750/5 3mm spacing – 6 blades (coatings from 5 to 10 mils)
Cross Hatch Cutter Kit
Get Price Quote
Cross Hatch Tester
Get Price Quote
The Cross hatch tester is widely used to access adhesion of coating materials like paint, powder coatings, etc., “CI” Cross Hatch Tester is a hardened single cutting block as per international standards with 4 cutting edges, fixed to a comfortable die cast aluminium handle. Supplied Complete in deluxe wooden box. SPECIFICATIONS BODY MADE OF : DIE CAST ALUMINIUM OVERALL LENGTH : 125 mm LONG OVERALL WIDTH : 30 mm approx. BOX DIMENSION : 170mmx130mmx60mm OVERALL WEIGHT : 650gms. (approx)
density cup
Get Price Quote
Jeep Meter
14,000 Per Piece
Surface Roughness Comparator
Get Price Quote
10 Piece (MOQ)
Surface Roughness Comparator
4,000 - 6,000 Per Piece
1 Piece (MOQ)
Rubert SA2.5 Shot Blast and Grit Blast Surface Comparator A precision Nickel comparator plate which conforms to International Standard ISO 8503 for grit and shotblast surface roughness comparison measurement. Popular comparators for shot blasting comparison When steel has been blast cleaned, the surface consists of random irregularities with peaks and valleys that are not easily characterized. Fine-grade:profiles equal to segment 1 and up to but excluding segment. Medium-grade:profiles equal to segment 2 and up to but excluding segment. Coarse-grade:profiles equal tosegment 3 and up to but excluding segment 4. Section Profile Metric:25μm, 40μm, 70μm, 100μm Section Profile Imperial:1mils, 1.6mils, 2.8mils, 4mils Rubert 130 Composite Machine Surface Comparator : In cases where surface roughness needs to be measured with great precision, elaborate instruments must be used. These are expensive, and often unsuitable for workshop use, where roughness of machined surfaces can usually be assessed conveniently and with sufficient reliability using visual and tactile (fingernail) comparison with a standard set of surfaces machined in the same way. This set consists of 30 comparison specimens, covering six of the most commonly-used machining methods: 6 cylindrically turned, 6 end-milled, 6 horizontally milled, 6 surface-ground, 3 lapped, 3 reamed/drilled. The label states the Ra values of each specimen in both metric and imperial units. Turning: 0.4um, 0.8um, 1.6um, 3.2um, 6.3um, 12.5um Vertical Milling: 0.4um, 0.8um, 1.6um, 3.2um, 6.3um, 12.5um Horizontal Milling: 0.4um, 0.8um, 1.6um, 3.2um, 6.3um, 12.5um Grinding:0.05um,0.1um,0.2um,0.4um,0.8um,1.6um Flat Lapping Reaming:0.05um, 0.1um, 0.2um, 0.4um, 0.8um, 1.6um
Cross Hatch Cutter
Get Price Quote
We are offering cross hatch cutter.
Cross Hatch Tester
7,000 Per Unit
Cross Hatch Tester the coating may be continuous and look good, but how well is it connected to the substrate. Supplied complete in a Wooden case with Brush, Adhesive Tape, lens and Operation Manual.Sizes: 1, 2 & 3 mm Widths.
Cross Hatch Tester
Get Price Quote
Presto’s cross hatch cutter is an effective cutting tool used widely in paint and plating industries. It is available with maximum 3 blades. The testing Instrument is used to assess the resistance to separation of the coating from the specimen. Presto’s Cross hatch tester is a safe and portable instrument that can be used by anyone. The size of the cutter is determined on the basis of the plating thickness of the substrate. The laboratory equipment is widely used in multiple forms to assess the resistance of paint coatings. Measuring the adhesion strength of coatings such as glue, paint, varnish, etc. is important to make sure that the coating has done perfectly with the material and is performing well. The cross hatch tester is designed to assess the strength of the coating and provides a quick assessment of the quality of the bond to the substrate. To perform the test, take a piece of sample and place and hold it tightly. Now make a scratch on the test specimen with the help of cross hatch instrument in the vertical direction. The cross hatch tester provides a visual comparison to paint and powder coatings of a specific thickness, which is easy and fast to use. Easy to operate, Portable instrumen
density cup
1,200 - 1,250 Per Number
SIZE : 100CC AND 50CC S.S 304
pinhole detector
Get Price Quote
The Elcometer 270 range utilises the wet sponge technique and has been designed to set a new standard for wet sponge detectors - a high quality, low voltage detector with similar accessories to a high voltage spark tester. Supplied ready to use Automatic sensitivity calibration and voltage checks Low battery indicator Visual and audible alarms Integral and separate wand functionality A wide range of fully interchangeable wand accessories Three model variants - single, dual or triple voltages Easy release snag proof cables Large standard sponge
Cross Hatch Cutter
Get Price Quote
Jeepmeter
Get Price Quote
Check your detectors voltage output with different voltage jeepmeters. Model JM features a digital display and measures up to 40 kv. Model PJM jeepmeters are pocket size that measure 0 – 20 kv.
Cross Hatch Tester
Get Price Quote
We are offering cross hatch tester.
PHD Pinhole Detectors
Get Price Quote
Product Description Features include a Liquid Crystal Display (LCD), with a 1% accuracy, clearly displaying the applied test voltage An alarm circuit, with user adjustable sensitivity, operates an audible and visual indicator when a fault is located An alarm circuit, with user adjustable sensitivity, operates an audible and visual indicator when a fault is located The operator is protected by a safety switch incorporated in the probe handle. In addition the output voltage (V) is current (I) limited The PHD Pinhole Detectors are sturdily built for on-site conditions, and are supplied with a carrying pouch and drum brush electrode Incorporating a built in universal mains charging unit, the fully portable direct current PHD 1-20 / 2-40 Pinhole Holiday detectors will quickly and accurately test non-conductive materials for pinholes (porosity or holidays) in the sample surface
Cross Hatch Cutter Kit
Get Price Quote
Cross hatch cutterTester kit is a multi-blade cutting tool used to assess the adhesion resistance of coatings to separation from substrates when a right-angled lattice pattern is cut into the coating and penetrates through to the substrate.
pinhole detector
Get Price Quote
Samruddhi Industries, pioneers in manufacturing Pinhole Detector and ancillary testing equipments, now offers the latest innovative Model PD-90 that confirms the chemical fabrication field proven cases with advanced Technology in solid state circuitry that is simplified & more efficient with reliability..