Moisture Separator Dealers

  We are a prominent firm engaged in supplying a wide range of Air Dryers / Moisture Seperators. These products are also checked stringently by quality analysts to ensure that defect free and best quality products to our honoured clients. We fabricated these using top quality materials and available in various dimensions. Clients can avail these from us at competitive prices in the market.Features: Optimum performance Long service life Provides cleaner, drier steam to heat exchangers Application : Compressed Air Exchangers Turbines

The compressed air coming out from an After Cooler, contains large quantities of water vapour condensed as a result of cooling of the compressed air. If this is not removed, much of it will be carried to the distribution system and cause extensive damage to all the equipment and processes, which use the air.Apart from water vapour, there is also an appreciable quantity of oil vapour that is formed due to heat and pressure carried along with the air stream is also removed by the separator. Wet steam is steam containing a degree of water, and is one of the main concerns in any steam system. It can reduce plant productivity and product quality, and can cause damage to most items of plant and equipment. Whilst careful drainage and trapping can remove most of the water, it will not deal with the water droplets suspended in the steam. To remove these suspended water droplets, separators are installed in steam pipelines. The steam produced in a boiler designed to generate saturated steam is inherently wet. Although the dryness fraction will vary according to the type of boiler, most shell type steam boilers will produce steam with a dryness fraction of between 95 and 98%. The water content of the steam produced by the boiler is further increased if priming and carryover occur. There is always a certain degree of heat loss from the distribution pipe, which causes steam to condense. The condensed water molecules will eventually gravitate towards the bottom of the pipe forming a film of water. Steam flowing over this water can raise ripples that can build up into waves. The tips of the waves tend to break off, throwing droplets of condensate into the steam flow.

We manufacture a wide assortment of indoor air filtration systems and industrial air filtration systems like air moisture separator, steam moisture separator, industrial moisture separator, etc., that are fabricated using high quality raw material and are used to for the filtration of air. Applicable in various industries, these moisture separators can be customized to suit the specific requirements of our clients.

Cent star series Moisture Separator is used for removing bulk water from the compressed air line. No electricity is used. Can mount inline. Particle separation by centrifugal action. No replacement of cartridges over the period.

One Strainer upstream of every trap, control valve, and flowmeter can save you a bundle in annual maintenance and wear & tear costs. Available in Y or T type designs, our strainers remove suspended grit from steam and condensate that would otherwise damage your downstream equipments; with no additional pressure drop.  

when steam/air is passed through the separator, any entrained water droplets are encouraged to separate and drain away rather than remain in suspension. Steam or air flows around a series of baffles and its velocity is reduced because the space in the separator is large compared with the pipe bore. However the inertia of water droplets carries them on in a straight line so they impinge on the baffles and drain away. The baffles are designed to divert separated water from the flow of steam or air. Together with reduced velocity this prevents re-entrainment. water in suspension- your invisible enemy all steam distribution systems contains a certain amount of water due to condensation and carry-over from boiler turbulence and foaming. A similar problem arises with compressed air systems because water is a natural ingredient of atmospheric air. In both cases, careful draining and trapping will remove much of the water but not all. It cannot remove the water particles suspended in the steam or air. All too often nothing is done to remedy this problem. Because the water cannot be seen it is ignored. The consequences can be very costly indeed. the damaging effects of water in steam systems when water droplets reach the point of usage they needlessly increase thickness of the water film on the heat exchange surface. And water is a very poor conductor of heat. In fact, a water film just 1mm thick is as resistant to heat transfer as a half meter thickness of copper. The water may also carry impurities which will be deposited as scale – another barrier to efficient heat transfer. What’s more, traveling at high velocity, the droplets will both erode and corrode valves and valve seat and shorten the life of pipelines and fittings. the damaging effects of water in compressed air systems suspended water droplets cause similar problems. Pipe, valve and fittings will corrode. Particles of corroded metal may be swept along the system, clogging valves, strainers and traps. At the point of usage, water delivered with air can damage work pieces. Air powered tools will require excessive maintenance and will wear prematurely. design features / benefits rex separatiors safeguard your costly equipmentrex separators will protect your costly equipment from harmful effects of water droplets, because they remove water droplets from steam or compressed air system and increase operating profitability by: improving steam quality to maximize heat transfer and therefore plant efficiency. reducing maintenance costs and extending the life of pipelines, valves, traps, strainers and other associated equipment. protecting compressed air tools and preventing water damage to workpieces. dry steam or compressed air for increased efficiency and longer plant life. effectiveness over a wide range of velocities with minimal pressure drop.

Cent star series Moisture Separator is used for removing bulk water from the compressed air line. No electricity is used. Can mount inline. Particle separation by centrifugal action. No replacement of cartridges over the period.

Features Safe, Secure, leak-proof, Lightweight and easy to handle, Very high Efficiency     Non-corrosive Aluminium die cast or powder coated MS body, Compact Design, Maintenance Free, Long life     Manual drain and auto drain facility, no corrosion, reduced maintenance, Easy to alter or extend a system

Ever since our inception in this industry, we have been involved in offering excellent quality products. Our entire range of products are manufactured as per international industry standards. Further due to their superior quality these products are widely used in various industries.

Generally, compressed air is vulnerable to various types of contaminations that greatly reduce its value as a power source and can have a profound effect on the machinery that it operates. Moisture is the most common and the most hazardous contaminant present in the air.Moisture Separatos are used to Separate Moisture From Compressed Air Line Application and can be protect the expensive pneumatic instruments.   Features Moisture Separator does not need any maintenance or repairs Compact & easy operation Moisture Separator performs constantly and consistently 99.99% working efficiency Fine adjustment of lubrication 4 to 5 Years Expected Life

3 Micron Borosilicate Glass Fiber media type Moisture Separator   This unique design 3 Micron Borosilicate Glass Fiber media type Moisture Separator is very effective for removal of Moisture from compressed Air. It prevents dirt, dust & water particles to be carried into the pneumatic system.   It is recommended to install this Separator just before application point for better performance.

We are a leading manufacturer and supplier of Moisture Separator that are extensively used for abstracting moisture and removing dirt, dust & water particles into the pneumatic system. These are made using 3 micron Borosilicate Glass Fiber that are ensures durability and ensures long service life. For better performance, our customers are advised to fit the separator before the application point.