JOY INDUSTRIAL TRADING Andheri East, Mumbai, Maharashtra

Optimum poppet technology for high shift consistency High flow and dirt tolerant Valves supplied with switch reactor Application: Used as safety valve in power presses and for clutch/brake controls

Type : Pneumatic Valves

Usage : Safety Valve In Power Presses And Clutch/brake Controls

5/2, 3/2 NO and NC high flow capacity poppet valveSturdy and reliable poppet designPort sizes up to G 1 1/2Low power solenoid with a range of AC/DC voltagesSpeed up to 600 cycles/min, life up to 10 million cyclesManual override as a standard featureMaterial: Body, Piston, Housing- aluminium, Seals- nitrileOptions: 3/2 NO, NC and 5/2 valve in solenoid and pilot versionApplication: Single-acting and double-acting cylinders

Type : Pneumatic Valves

Material : Body, Piston, Housing- Aluminium, Seals- Nitrile

pneumatic cylinder and Hydraulics products are available 

True, 2 hand “Non Tie Down” controls. If the 2 push buttons are not actuated within 1 sec., The press will not start. Compact, yet easy to service. Hinged and locable cover to avoid tempering of timer settings. Status LED indicators for each stage of sequence.

Application : Pressing Operations

Cylinders with M.S.end coverand round profile M.S hone tube. Designed suit to die casting PTFE seals and bearing strips ensure parfect sealing and smooth movement Non cushion as a standard feature. cushion(optional) Stroke length offered up to 5OO mm Working pressure up to 140 bar. Viton seal as a standard feature. Piston rod is available with thread & coupler type version. Front and rear flange mounting are available Construction : Tube - Mild steel seamless tube with ID honed and hard chrome plated. Piston rod-EN-8 hard chrome plated

Material : Mild Steel Seamless Tube With Hard Chrome Plated Piston Rod (EN-8)

Number Of Flower : Hydraulic Cylinder

Application : Suitable For Die Casting Applications

Stroke Length : Up To 500 Mm

One auto drain for all voltage from 24 V to 230 V AC/ DC Most compact design (easy to install) Solid- state switching for long life & reliability Adjustable interval & discharge times (dual time setting) Dust/ weatherproof Test botton for maintenance check

Number Of Flower : Diaphragm Type Auto Drain

6 types of mounting are available. Non cushion as a standard feature. Cast on heavy-duty end covers oxidised for rust Prevention. Seamless cold drawn M.S. honed and hard chrome plated internally to gives long life for piston seal. Piston and is ground, micro-finished and hard chromre plated for lasting seal life and anti-corrosion. Synthetic rubber seals with an extra long and rigid inner lip provides an anti twist grip on the piston. Construction, Tube • Mild steel seamless tube with ID honed and hard chrome plated, Piston rod - EN-P hard chrome plated.

Features Designed suit to die casting PTFE seal and bearing strips eosure perfect sealing and smooth movement Stroke leogth offered up to 50mm. Non cushion as a standard feature. Working pressure up to 140 bar. Viton seal as a standard feature. Piston rod is available with male; female thread & coupler type version. Construction : Compact Steel Body with ID ground and hard chrome plated. Piston rod : EN-8 hard chrome plated.

Material : Steel

Number Of Flower : Hydraulic Cylinder

Special purpose valves available from 2000 psi pressure to 30000 psi The integral bonnet makes the valve very compact and light Panel mountable, installs in space restricted areas Tested for bubble tight leakage for both seat and packing Available in (S4)/(S6)/(B) construction upto 1/2 " size Metering Valves / Union Bonnet valves / Gauge Isolation valves available on request

Number Of Flower : Needle Valves

Size Range : Up To 1/2

Exceptional compactness & economy Same high level performance of individual filter & regulator Saves space, reduces pipe connections & costs less Full flow gauge port Choice of automatic drain Built in relief Non threaded bowl Quick release bowl & guard assembly Non rising low torque Pressure adjusting knob Push pull adjusting knob Flow sensor provides a constant oil/air ratio over a wide range of flows Oil filling under pressure possible

Number Of Flower : Filter Regulator Lubricator

Application : Industrial Air Filtration And Regulation

Moisture Removal up to 99.5% Negligible Pressure Drop Low Maintainace Cost Automatic Draining as Standard Feature Complete Aluminium Construction Simple and easy to Install

Material : Aluminium

Conforms to ISO 5782 -1 Suitable for Modular mounting Steel bowl guard, bayonet type on F14, F15 & F17 models and threaded type on F13 model. Press type Manual drain for easy operation. Bronze filtering element. Separator and shield for efficient moisture separation.

Safest blow gun of its type features tamper-proof nozzle plus maximum efficiency at the lowest cost. Siemag safety blowguns are lightweight, lever operated for safe comfortable handling, equipped with a convenient "hang up " hook. Made from high-quality Pressure Die Castings, these blowguns are designed for safe operation in all types of applications in industries. Unregulated blowguns are available for Higher Flow Requirement. 30 PSI regulated (OSHA standard) blow gun available.

Number Of Flower : Blow Gun

Material : Pressure Die Castings

Application : Industrial Applications

Feature : Tamper-proof Nozzle, Lightweight, Lever Operated

Tight shut-off No Minimum Pressure required. Low Cost - Minimum size. Only one moving part eliminates maintainance problem To control instrument air, low pressure gasas, gravly feed & other applications. Can be installed in any direction

Application : Instrument Air, Low Pressure Gases

WE R DISTRIBUTORS FOR "A" CLASS COMPANIES,DEALING IN PNEUMATIC & HYDRAULIC CYLINDERS & VALVES, FRL UNIT ( FILTERS,REGULATORS & LUBRICATORS)