SS DENSITY CUP
600 Per 600 Litre
We “Durva Enterprise” are a renowned manufacturer of premium quality range of Retort Equipment, Laboratory Jack, Nickel Crucibles, Density Cup, Filter Holder Assembly, etc.
Multi Blade Cross Hatch Cutter Kit
Get Price Quote
Caltech Engineering Services introduce newly launched multi cross hatch cutter kit. Cross hatch cutter will allow an assessment to be made of the adhesion resistance of coatings to separation from substrates when a right-angled lattice pattern is cut into the coating and penetrates through to the substrate. Cross hatch test has been used widely to assess the adhesion of paint coatings. Cross hatch testing depends on factors like flexibility of coating, the presence of interference layers between coating and substrate etc. The test method specifies suitable cutting tools with either single or multiple cutting edges. The NEW multi cross hatch cutter kit is provided with multiple cutters of 1, 2 and 3mm spaces between the cutting edges, has advantages over the single cutting blade for both safety and simplicity in use. One Cross hatch cutter kit includes the entire cutter therefore customer need not purchase different cutters.
Best Deals from Elcometer Instruments
density cup
1,500 Per Piece
5 Piece (MOQ)
Weight per liter Cup/Density Cup – Stainless steel Precision instrument for determining the specific gravity (Density) of paints coatings, lacquer, pastes, semi pastes, and other liquid or semi liquid materials and similar products. This instrument consists of a cylindrical container and cover with a hole for excess liquid to be overflown, as per IS: 101 capacity 100 ml . Details: Pycnometers are used to determine the specific weight per unit volume of a liquid at a given temperature. Made from Stainless steel material Supplied with top cover (Lid) with small hole As per IS: 101 capacity 100 ml
Lorgnette Pinhole Occluder
Get Price Quote
100 Piece (MOQ)
These Occluders are made from a high impact plastic that can withstand multiple uses and cleanings. Each Occluder includes a riveted pinhole flipper. Occluder can be used for covering either eye. These Occluders are great for anything from studies to clinical exams. Occluder includes a nose piece for accurate positioning. Features : Multiple pinhole flipper made of high impact resistant plastic. Angled handle to keep hand away from face during use. Can be sterilized with any non-solvent based germicide.
Cross Hatch Cutter
1,000 Per Piece
With us, one can stay completely assured for safe and dependable payment procedures. Our warehouse is installed with advanced machines and all required amenities ensuring safe storage of diverse kinds of products requiring different storage temperatures and conditions. Our Cross Hatch Cutter has multi blade cutter spacing 1mm, 2mm, 3mm, etc.The Cross test is used to access adhesion of paint coatings. According to coating thickness select a suitable model. Useful for Flat surface 1 mm model 11 Blades ( Coating up to 60 microns) 2 mm model 6 Blades ( Coating 60 – 120 microns) 3 mm model 5 Blades ( Coating 120 – 250 microns) Standard : ASTM D 3002, 3359 & IS
Cross Hatch Tester
Get Price Quote
The cross hatch tester tape is in accordance with ASTM D3359 specification . This tape along with the cross hatch tester is used for checking the adhesion of the paint coating after making the insertion with the cross hatch tester. You need to apply the pressure sensitive tape and remove it to get the cross hatch pattern. Looking at this pattern you can come to a conclusion as to the adhesion of the coating.
Cross Hatch Cutter
Get Price Quote
Made By : Imported PRODUCT FETURES Cross Hatch Cutter • Introduction Cross hatch tester is designed for assessing the resistance of paint or related coatings to separation from substrates when a right-angle lattice pattern is cut into the coating, penetrating through to the substrate. When applied to multi-coat system, assessment of the resistance to separation of individual layers of the coating from each other may be made. • Packing List 2.1 1 X Carrying Case 2.2 1 X Cross Hatch Cutter & Handle , either : 1 1mm spacing, 6 teeth Or 2 1mm spacing, 11 teeth Or 3 1.5 mm Spacing, 6 teeth Or 4 2mm spacing, 6 teeth Or 6 3mm spacing, 6 teeth 2.3 1 X Magnifier ( 5X) 2.4 1 X Tape ( 3M ) 2.5 1 X Soft Brush • Specification The Cross cutters Tester conform with the requirements of : ISO2409-1992 GB/T9286-98 BS3900 E6
Jeep Meter
Get Price Quote
Cross Hatch Cutter
Get Price Quote
The “Cross Hatch” test is widely used in various forms to assess adhesion of paint coatings. The cutter has advantages over single cutting blades for both safety and simplicity in use, available with 1, 2, or 3mm spaces between cutting edges. Complies with BS 3900; E6, ASTM D 3359, BS/DIN EN ISO 2409 :- 750/1 1mm spacing – 6 blades (coatings up to 2.5 mils) 750/2 1mm spacing – 11 blades (coatings up to 2.5 mils) 750/3 1.5mm spacing – 6 blades (intermediate version) 750/4 2mm spacing – 6 blades (coatings from 2.5 to 5 mils) 750/5 3mm spacing – 6 blades (coatings from 5 to 10 mils)
Surface Roughness Comparator
Get Price Quote
10 Piece (MOQ)
Cross Hatch Tester
7,000 Per Unit
Cross Hatch Tester the coating may be continuous and look good, but how well is it connected to the substrate. Supplied complete in a Wooden case with Brush, Adhesive Tape, lens and Operation Manual.Sizes: 1, 2 & 3 mm Widths.
Surface Finish Comparator
10,990 Per Piece
Weight per Liter Cup
900 Per Piece
For specific Gravity determination of paints or similar materials.Made of stainless steel, light weight, As per IS :101, BS3900 Capacity :100cc
Holiday Detector
Get Price Quote
Features: Display of output high voltage directly Clear LCD with blue backlight Switch off automatically State of charge indicator HD-60(A): Mainly used for the antisepsis of Pottery HD-60(B): Mainly used for petroleum pipeline(High voltage) HD-90: Displays holidays of antisepsis coating on two digital tube
Surface Roughness Comparator
4,000 - 6,000 Per Piece
1 Piece (MOQ)
Rubert SA2.5 Shot Blast and Grit Blast Surface Comparator A precision Nickel comparator plate which conforms to International Standard ISO 8503 for grit and shotblast surface roughness comparison measurement. Popular comparators for shot blasting comparison When steel has been blast cleaned, the surface consists of random irregularities with peaks and valleys that are not easily characterized. Fine-grade:profiles equal to segment 1 and up to but excluding segment. Medium-grade:profiles equal to segment 2 and up to but excluding segment. Coarse-grade:profiles equal tosegment 3 and up to but excluding segment 4. Section Profile Metric:25μm, 40μm, 70μm, 100μm Section Profile Imperial:1mils, 1.6mils, 2.8mils, 4mils Rubert 130 Composite Machine Surface Comparator : In cases where surface roughness needs to be measured with great precision, elaborate instruments must be used. These are expensive, and often unsuitable for workshop use, where roughness of machined surfaces can usually be assessed conveniently and with sufficient reliability using visual and tactile (fingernail) comparison with a standard set of surfaces machined in the same way. This set consists of 30 comparison specimens, covering six of the most commonly-used machining methods: 6 cylindrically turned, 6 end-milled, 6 horizontally milled, 6 surface-ground, 3 lapped, 3 reamed/drilled. The label states the Ra values of each specimen in both metric and imperial units. Turning: 0.4um, 0.8um, 1.6um, 3.2um, 6.3um, 12.5um Vertical Milling: 0.4um, 0.8um, 1.6um, 3.2um, 6.3um, 12.5um Horizontal Milling: 0.4um, 0.8um, 1.6um, 3.2um, 6.3um, 12.5um Grinding:0.05um,0.1um,0.2um,0.4um,0.8um,1.6um Flat Lapping Reaming:0.05um, 0.1um, 0.2um, 0.4um, 0.8um, 1.6um
Jeep Meter
30,000 Per Piece
PULSE HOLIDAY DETECTOR
50,000 - 60,000 Per 5kg
Cross Hatch Tester
Get Price Quote
Presto’s cross hatch cutter is an effective cutting tool used widely in paint and plating industries. It is available with maximum 3 blades. The testing Instrument is used to assess the resistance to separation of the coating from the specimen. Presto’s Cross hatch tester is a safe and portable instrument that can be used by anyone. The size of the cutter is determined on the basis of the plating thickness of the substrate. The laboratory equipment is widely used in multiple forms to assess the resistance of paint coatings. Measuring the adhesion strength of coatings such as glue, paint, varnish, etc. is important to make sure that the coating has done perfectly with the material and is performing well. The cross hatch tester is designed to assess the strength of the coating and provides a quick assessment of the quality of the bond to the substrate. To perform the test, take a piece of sample and place and hold it tightly. Now make a scratch on the test specimen with the help of cross hatch instrument in the vertical direction. The cross hatch tester provides a visual comparison to paint and powder coatings of a specific thickness, which is easy and fast to use. Easy to operate, Portable instrumen
Cross Hatch Cutter Handle
6,500 Per Piece
1 Piece (MOQ)
Jeep Meter
14,000 Per Piece
density cup
Get Price Quote
density cup
1,200 - 1,250 Per Number
SIZE : 100CC AND 50CC S.S 304
Cross Hatch Cutter
Get Price Quote
We are offering cross hatch cutter.
Cross Hatch Cutter
Get Price Quote
Presto Cross Hatch Cutter is an effective cutting tool available with 1,2 or 3 mm blades. It is used to assess the adhesion or resistance to separation of coatings from substrates. Presto Cross cutter is safe and simple to use. Cutter size used is determined on the basis of the coating thickness of the substrate.The instrument is widely used in various forms to assess adhesion of paint coatings.
density cup
1,250 Per Piece
Scotch Cross Hatch Cutter Kit
Get Price Quote
Cross Hatch Tester
Get Price Quote
The laboratory equipment is widely used in multiple forms to assess the resistance of paint coatings. Measuring the adhesion strength of coatings such as glue, paint, varnish, etc. is important to make sure that the coating has done perfectly with the material and is performing well. The cross hatch tester is designed to assess the strength of the coating and provides a quick assessment of the quality of the bond to the substrate.
Cross Hatch Cutter
Get Price Quote
Product Description The ‘Cross Hatch’ test is widely used in various forms to assess adhesion of paint coatings. This cutter has advantages over single cutting blades for both safety and simplicity in use, available with 1, 2 or 3mm spaces between cutting edges. Complies with BS 3900;E6, ASTM D 3359, BS/DIN EN ISO 2409 NOW AVAILABLE AS STANDARD WITH EIGHT CUTTING SIDES
Cross Hatch Cutter Kit
Get Price Quote
Cross hatch cutterTester kit is a multi-blade cutting tool used to assess the adhesion resistance of coatings to separation from substrates when a right-angled lattice pattern is cut into the coating and penetrates through to the substrate.
Caltech Cross Hatch Cutter Kit
1,200 Per Piece