A. K. Industries Goregaon, Mumbai, Maharashtra

We are the prominent Manufacturers, Exporters and Suppliers of Tube Clamp to our valuable customers. The standard series of Tube Clamp is designed according to DIN 3015 - Part - 1 available in Plastic, Aluminum clamp bodies with Steel / S. S. plates & bolts. The standard series of Tube Clamp is normally used for general-purpose applications and the W.P. range up to 1500 PSI (100 BAR) in the Steel / stainless steel Piping System. Standard series Tube Clamp is available along with Multilayer, welding plates, rail nuts, construction types, rubber inlay types and many more. Minimum Order Quantity : 1,00,000 pieces

A.K.I hand tube benders provide consistent ,high-quality bends in tubing made from materials that can be used with A.K.I tube fittings.   Features   The hand tube bender is available in 1/4, 5/16, 3/8, and1/2 in., as well as 6, 8, 10, and 12 mm tubing sizes. Handle design provides enhanced leverage for bends greater than 90°. Roll dies reduce bending force and tube ovality, as compared to conventional slide block design. 1 to 180° bending range.    

We are one of the reputed Manufacturers, Suppliers and Exporters of Toggle Valves. Toggle Valves are precision �machined Valves that are available in 1/8- and 1/4-inch sizes in both brass and stainless steel. Toggle Valves are ideal for applications where instant on-off control is necessary. Toggle Valves are rated to 200 psig. Our Toggle Valves with dual seats provide leak-tight bi-directional sealing. Features Stainless Steel and Brass ConstructionPanel MountableQuick On/Off ServiceStraight and Angle Patterns AvailableSizes : 1/8" & 1/4"MAWP 300 psig at 20oC (70oF)MAWT 400oF (204oC)Flow coefficient (Cv) 0.1 to 0.2Colored Nylon and Metal Handles Construction : SS 304, SS 316 , Brass Minimum Order Quantity : 1,00,000 pieces

FEATURES   Stainless Steel and Brass Construction Panel Mountable Quick On/Off Service Straight and Angle Patterns Available Sizes: 1/8" & 1/4" Pressure – 0 to 10kg/cm2 AKI TOGGLE VALVE  are precision-machined valves are available in 1/8- and 1/4-inch sizes in both brass and stainless steel. Toggle valves are ideal for applications where instant on-off control is necessary. Toggle valves are rated to 200 psig. The Toggle valves with dual seats provide leak-tight bi-directional sealing.  

For high pressure as well as vacuum and other critical applications, the plant designers have no other alternative but to use a most reliable, safe and leak proof pipe connection. Hence, we offer high quality Stainless Steel Tube Fittings in the market. We are reliable Manufacturer, Supplier and Exporter of Stainless Steel Tube Fittings, which are widely used in the field of Hydraulics, Pneumatics and Instrumentation. Stainless Steel Tube Fittings are compatible in dimensions to most of the reputed international makes, so designed that interchangeability is possible. The double ring connection in Stainless Steel Tube Fitting is a high safety device operating by compression. It avoids threading, soldering, swaging or crimping the tube & permits repaid, easy and reliable connections where dismantlable tubes require perfect tightness, both under pressure and high vacuum levels as well as under severe temperature and vibration conditions. The usage of Stainless Steel Tube Fittings assures our customers of maximum reliability and years of trouble free service under adverse conditions and rigorous operating environment. Features Easy assembly and provides leak-proof torque free seal at tubing connections.Complete interchangeability in the field.Vibration and pressure pulses resistant.Special thread cuts and nuts silver plating ensures no galling.Low assembly torque, no torque transmitted to tubing.Higher rated fittings upto 10000 psi optional Construction Constructed out of bar stock material in Stainless Steel as per ASTM A276 TP 304 and TP 316 and other alloys, carbon steel and brass. The Stainless Steel Tube Fittings are designed for tube sizes: 1/16" to 1" & 4 MM to 25 MM, outside diameter, stud sizes are 1/8" to 1"Npt, API, ISO, Parallel and ISO Taper. Applications Stainless Steel Tube Fittings are ideal for eliminating costly and hazardous leaks in Instrumentation, Onshore and Offshore, Chemical, Petrochemical, Nuclear and Process Tubing. Special Features Suitable for use in corrosive atmosphere, high temperature, ultra clean and vacuum applications Minimum Order Quantity : 1,00,000 pieces

We are engaged in manufacturing, exporting and supplying the Stainless Steel Snubber to our respected customers. The Stainless Steel Snubber is manufactured precisely using the high-grade material as per industry standards. Owing to precise design and superior finish, the Stainless Steel Snubber is highly in demand among our customers. The Stainless Steel Snubber is widely appreciated due to rust free properties and unsurpassed quality. Minimum Order Quantity : 1,00,000 pieces

We manufacture, export and supply high quality Stainless Steel Braided Hose. The Stainless Steel Braided Hose, offered by us, is designed using the best quality steel with precision to ensure flawless range. The Stainless Steel Braided Hose is durable and comes with corrosion resistant properties. Customers can avail the faultless Stainless Steel Braided Hose at the market leading rates. Highlights Superior qualityPrecise designDurableRust free Minimum Order Quantity : 1, 00,000 pieces

Gauge Snubber fittings protects pressure  gauges and instruments from system pressure surges and shock.   Pressure damping (snubbing) is accomplished through the use of a porous sintered SS 316 element. When snubber is installed up stream from a pressure instruments, the response rate of the instrument is reduced and generally varies with the initial pressure drop across the porous metal element, and allows the instrument to smoothly come to line pressure. Heat code traceability SPECIFICATION: Size : 1/4"F x 1/4"M1/2"F x 1/2"M1/4"F x 1/8"M1/2"F x 1/4"M1/2"F x 3/8"M S 316 1000 Deg F (538 Deg C).Optional Sour Gas service valves are available confirming to NACE Std. MR - 01 - 75.All Snubbers are 100% Factory tested prior to shipment. APPLICATION Refineries, liquid patroleum gas processing plant, petro-chemical plants, systems difficult to shur off due to solid contents dust, rust, dirt etc.Pneumatic Seat test is performed at 1/4 of working pressure.Hydrostatic shell test is performed at 1.5 times the working pressure.    

AKI has emerged as a leading manufacturer in condensate pot. With high quality and durability condensate pot are supplied all around the world. We have been observing to maintain good accuracy and strength of it in order to meet the customer’s needs. Use as liquid or condensate traps, seal pots, vapor chambers and knockout pots. All connectors are furnished with plastic plugs. Chambers are made from seamless carbon steel pipe and weld caps. All pipe connections are 3000# half-couplings mounted on 90 Degree angle. Extra connections can be furnished upon customer request.

The inside diameter of the hoses must be adequate to keep pressure loss to a minimum and avoid damage to the hose arising as a result of heat generation or excessive turbulence. Hoses outside diameter can be a critical factor when hoses roufing clamps are used or hoses are routed through bulkhead, check individual hose specification table for O.D.'S.Both fluid and ambient temperature must be considered while selecting a replacement assembly. The hoses selected must be capable to withstand minimum and maximum temperature of system. While selecting a hoses for its maximum temperature care should taken that temperature stated is not an intermittent value.Most often only a duplicate of the original hose will have to be made. Make sure all the requirements of the application are fulfilled. While selecting hoses, its application should be considered i. e. Static Moving Flexing. Various application may require different hoses constructions. For construction please check individual hose specifications.

The inside diameter of the hoses must be adequate to keep pressure loss to a minimum and avoid damage to the hose arising as a result of heat generation or excessive turbulence. Hoses outside diameter can be a critical factor when hoses roufing clamps are used or hoses are routed through bulkhead, check individual hose specification table for O.D.'S. Both fluid and ambient temperature must be considered while selecting a replacement assembly. The hoses selected must be capable to withstand minimum and maximum temperature of system. While selecting a hoses for its maximum temperature care should taken that temperature stated is not an intermittent value.   APPLICATIONDetermine where or how the replacement hose or assembly is le used.   Equipment Type: - Most often only a duplicate of the original hose will have to be made. Make sure all the requirements of the application are fulfilled. While selecting hoses, its application should be considered i. e. Static / Moving / Flexing.   Working Pressure: - Check individual hose specification table for working pressure. The working pressure or operating pressure is one fourth the hose minimum burst pressure.   Pressure Surges: - In hydraulic systems, where pressure surges are severe, increase the safety factor when selecting the proper hoses (safety factor working / burst = 1/5) Conversely, in systems where pressure surges are slight or nonexistent, the normal safety factor must be chosen.   Environmental Conditions: - Care must be taken to ensure that the hoses and fittings are either compatible with or protected from the environment to which they are exposed. Environment conditions including but not limited to ultraviolet heat, ozone, moisture, water, salt water, chemical and air pollutants can cause degradation and premature failure and therefore must be considered.   Mechanical Load: - External forces can significantly reduce hoses life. Mechanical loads which must be considered include excessive flexing, twist, kinking tensile or side loads, bend radius vibration. Use of swivel type fitting or adaptors may be required to ensure no twist is put into the hoses. Unusual applications may require special testing prior to hose selection.   Hose Construction: - Various application may require different hoses constructions. For construction please check individual hose specifications.  

We are one of the well known Manufacturers, Exporters and Suppliers of Quick Release Couplings. The Quick Release Couplings are used for connecting and disconnecting various fluid lines. The Quick Release Couplings can be operated simply by one hand push action without twisting or wrenching. Automatic locking during disconnection in Quick Release Couplings minimizes fluid loss. Features Double shut off couplings are used when positive shut off, of both ends of pressurize lines is required.Single shut off are used where only automatic shut off, of socket end is required.Straight through coupling is use for maximum flow and without automatic shut off.Size : 1/8� to 4�Pressures : Vacuum to 150 PSI (350 kg/cm2) Construction Material : MS Chrome Plated SS and Brass. Easy QRC We have introduced one of the best QRC for easy use and compact functioning. This QRC is named as easy QRC because it is easily operated with single push button. Pressing the button causes disconnection between to active connection with zero percent leakage. This E-QRC was invented by AKI in the year 2007. We also make custom E-QRC according to the customer need Technical Specifications Working Pressure : 1 KG/CM2 � 10KG/CM2Testing Pressure : 80KG/CM2Temperature : 150 Degree Celsius Sizes 1/8�OD X 1/8� (both side tubing connection)1/4" OD X 1/4"OD (both side tubing connection)1/8� NPT X 1/8� NPT (treads as per customer BSP, BSPT, NPT, hose connection)1/4� NPT X 1/4" NPT (thread as per customer BSP, BSPT, NPT, hose connection) Minimum Order Quantity : 1,00,000 pieces

AK Industries Quick release couplings are used for connecting and disconnecting various fluid lines. It can operates simply by one hand push action without twisting or wrenching. Automatic locking during disconnection minimizes fluid loss. Features Double shut off couplings are used when positive shut off of both ends of pressurize lines is required. Single shut off are used where only automatic shut off of socket end is required. Straight through coupling is use for maximum flow and without automatic shut off. Size: 1/8” to 4”. Pressures : Vacuum to 150 PSI (350 kg/cm2 )

AKI has introduced a new product to its customers SS braiders. This braiders are specially used with AKI GSB to connect it with valve or connecting side. When pressure is applied, unbraided hose tends to elongate axially; to restrain this, an external layer of SS wire braid is provided. The braid also makes the assembly pressure compatible. Sometimes two or even three layers of braiding are provided for high pressure applications. The braiding is highly flexible and follows the movement of the hose. The braid is normally manufactured in SS 304 wire. However SS 316 and 321 braids can also be manufactured. We also supply wire braid in different configurations as per customer specifications.

Removal of Oxygen from gases takes place only with the help of catalytic type of materials, which also work only under specific operating conditions. We use pre-treated catalyst which can be regenerated & has comparatively better activity under normal working conditions. Ox traps are supplied with either indicating or non- indicating type of catalyst. Sizes     8” long end to end connection ( including fittings) 10” long end to end connection ( including fittings) 12” long end to end connection ( including fittings)

With our experienced professionals and latest technology, we are engaged in manufacturing, exporting and supplying the Oxygen Trap in the market. The Oxygen Trap, offered by us, is precisely designed using the best quality material. Owing to precise design, perfect finish, durability and economical rates the Oxygen Trap is highly in demand among our customers. We offer the Oxygen Trap in high-grade packing material with delivery on time. Introduction Removal of Oxygen from gases takes place only with the help of catalytic type of materials, which also work only under specific operating conditions. We use pre-treated catalyst, which can be regenerated and has comparatively better activity under normal working conditions. Our traps are supplied with indicating or non- indicating type of catalyst. Sizes 8� long end to end connection ( including fittings)10� long end to end connection ( including fittings)12� long end to end connection ( including fittings) Connections : 1/4�� tube connection or 1/8�� tube connection Minimum Order Quantity : 1,00,000 pieces

The sophisticated and costly instrument used in complex plants need to be installed according to certain carefully laid down safeguards using selected and reliable accessories. Most of the instrument valves produced without any adherence to the rigid codes of the instrumentation industry is unsafe to high pressure use. These Valves cheaply produced have common deficiencies such as their seal just an 'O' ring Spindle cannot take wear. Leakage due to galling at the tip Spindle which rotates on closure is prone to galling and normally threads are in contact with process media. Hence we have designed Needle Valves to eliminate all above deficiencies as a reliable Manufacturer, Supplier and Exporter. Needle Valves, offered by us, are produced under rigid quality control from quality raw material. We employ latest technology during manufacturing Needle Valves in our manufacturing unit. Further, to match the international standards and customer requirement, we also provide customized solutions for Needle Valves. Features All Needle Valves including those used with instrument Air Feed Headers are produced for working pressure 6000 PSI.Stem design with no turning action on closure thus preventing galling.Threads Protected from process media.Forzed or Bar Stock Construction in straight or angel pattern with panel mounting type.Screwed bonnet, union bonnet and integral body bonnet construction, Valves.Metal to metal or stellited and non-rotating tip stem for high pressure, Teflon seal for positive repetitive shutt off for low density gases and non-lubricating fluid.Special Telfon as grafoil packing for leak proof joint at various temperatures. Construction Generally fabricated from forged / barstak material in high grade stainless steel, carbon steel, brass and monel materials in variety of end Connection.All NPT threads to ANSI B2.1All BSP Parallel threads to BS 2779All BSP taper threads to BS 21Socket Weld design optional Minimum Order Quantity : 1,00,000 pieces

We are offering Moisture Trap to our esteemed customers. The Moisture Trap comes with high efficiency silica gel and molecular sieves that are used for removing moisture from the carrier gas. Silica gel in the Moisture Trap is of indicating type changing its color from blue to pink on use, having high moisture capacity. Molecular sieves in Moisture Trap are of spherical shape, yielding high mechanical strength & low dusting. Both the materials are of generable type. Sizes 8� long end to end connection ( including fittings)10� long end to end connection ( including fittings)12� long end to end connection ( including fittings) Connections : 1/4�� tube connection or 1/8�� tube connection Minimum Order Quantity : 1,00,000 pieces

High efficiency Silica gel & Molecular sieves are used for the purpose of removing moisture from the carrier gas. Silica gel is of indicating type changing its colour from blue to pink on use, having high moisture capacity. Molecular sieves are of spherical shape, yielding high mechanical strength & low dusting. Both the materials are of regenerable type.  Sizes   8” long end to end connection ( including fittings) 10” long end to end connection ( including fittings) 12” long end to end connection ( including fittings)

We are one of the renowned Manufacturers, Exporters and Suppliers of Metal Tubes. We offer the Metal Tubes in range of SS and COPPER tubes in Indian market as well as overseas. The Metal Tubes are manufactured on the basis of ball testing which does not lead to ovality in tube. The Metal Tubes are manufactured with perfect ratio of stress in them. Metal Tubes are available in meter as well as coil form 50mtr /100mtrs. We have wide range of Metal Tubes starting from 1/16� to 1� tube. Features It is provide with sleeveGood rigidity and stress rationAvailable in coil as well as meter formSmooth and aluminum finishingPU coated available Material of construction : SS 304/ SS 316/ copper/ PTF / PVC Sizes : 1/16� , 1/8� , 1/4" , 1/2", 3/8�, 3/4", 1� Minimum Order Quantity : 1,00,000 pieces

For high pressure as well as vacuum and other critical applications, the plant designers have no other alternative but to use a most reliable, safe and leakproof pipe connection.AK Industries proven design of its products in the fields of Hydraulics, Pneumatics and Instrumentation assures you of maximum reliability and years of trouble free service under adverse conditions and rigorous operating environment.  AK Industries design and manufacture the fitnest fittings. These fittings are compatible in dimensions to most of the reputed international makes, so designed that interchangeability is possible. The A.K.I double ring connection is a high safety device operating by compression. It avoids threading, soldering, swaging or crimping the tube & permits repaid, easy and reliable connections where dismantleable tubes require perfect tightness, both under pressure and high vaccum levels as well as under severe temprature and vibration conditions.  Features:- Easy assembly and provides leakproof torque free seal at tubing connections. Complete interchangeability in the field. Vibration and pressure pulses resistant. Special thread cuts and nuts silver plating ensures no galling. Low assembly torque, no torque transmitted to tubing. Higher rated fittings upto 10000 psi optional. Construction:- Constructed out of barstock material in stainless Steel as per ASTM A276 TP 304 And TP 316 construction in other alloys, carbon steel and brass optional .The Fittings are designed for tube sizes: 1/16" to 1" & 4 MM to 25 MM, outside diameter, stud sizes are 1/8" to 1"Npt, API, ISO, Parallel and ISO Taper. Application:- Fittings the most ideal for eliminating costly and hazardous leaks in Instrumentation, Onshore and Offshore, Chemical, Petrochemical, Nuclear and Process Tubing.

AKI has been a leading supplier in SS/COPPER tubes in Indian market as well as overseas. Our tube are made on the basis of ball testing which does not lead to ovality in tube. Tube are manufactured with perfect ratio of stress in them. Tube are available in both meter as well as coil form 50mtr /100mtrs. We have wide range of tube starting from 1/16” to 1” tube.     Features:-      It is provide with sleeve Good rigidity and stress ration  Available in coil as well as meter form Smooth and aluminum finishing PU coated available   Material of construction  SS 304/ SS 316/ copper/ PTF / PVC   Size   1/16” , 1/8” , 1/4" , 1/2", 3/8”, 3/4", 1”  

AK Industries Instrument Pipe Fittings are machined from bar stock and forgings. The Fitting’s are design as per highest quality and standard to be used for process control and instrumention connections between pipe size and tube size  Available as per ANSIB 310.1 Power Piping Code, ANSI 31.3 Chemical and Petroleum Refinery Piping Code. Size ranges from 1/8” To 2” NPT Tapered pipe Thread, ISO Parallel Threads. All Male Threads are rolled for extra strength. Protective and caps prevent damage to exposed threads.