ARC Welding Machine Dealers in Mumbai

An arc is maintained between the end of a bare wire electrode and the work. As the electrode is melted, it is fed into the arc by a set of rolls, driven by a governed motor. Wire feed speed is automatically controlled to equal the rate at which the electrode is melted, thus arc length is constant (similar to MIGMAG - constant voltage). The arc operates under a layer of granular flux, hence submerged arc. Some of the flux melts to provide a protective blanket over the weld pool. The remainder of the flux is unaffected and can be recovered and re-used, provided it is dry and not contaminated.

The power supply can be used for submerged arc welding, MMA welding, air carbon arc gouging. New design and specific processing treatment for special environment  , greatly increase reliability of welder, suitable for various working environment. Adopts up to date and the most advanced control principle and each technical index reaches class A grade. Excellent welding performance, deep molten pool, high intensity good appearance. Widely applied for automatic welding of various carbon steel, alloy steel, stainless steel pressure vessel. Built in over heat, over current, over voltage and low voltage protection circuit, operating safely

We are agents of RILONRILOX welding machinery. The products be it arc welding, tig welding or mig welding have been for years now used by large number of companies and have been a successful product. These machine come with 1 year warranty and service would be provided on site in most of the locations of India. Do go through the series of machinery along with its specifications and get back to us if you need any more clarifications. RILON makes ARC Welding Machine of 200 Amperes, 250 Amperes, 315 Amperes, 400 Amperes, 500 Amperes, and 630 Amperes.

Welding methods: it is a manual arc welding machine. applicable material: it is a applicable to various acidic alkaline (basic) electrodes, stainless steel electrodes, heat resistance steel electrodes, cast iron electrodes. Scope of application: it can weld low carbon steel, medium carbon steel, alloy steel etc. And widely used in light industrial manufacturing, maintenance, and civil structure installation. Excellent working performance: it has mosfets advance technology & hence energy saving features. It has good dynamic characteristics, little spatter and very good arc stability, easy to control welding pool with nice weld bead having good welding appearance and units have good auto adoptive arc force. Arc force prevents sticking & shorting of the electrodes during welding. Hsm arc400 also has manually adjustable arc force control. additional features: i) vrd anti-shock features ensure no load voltage is retained at 9v-15v to provide protection against electric shock. Ii) it has anti-pausing welding features which prevents the welding rod from sticking to the working piece and easy to operate. Iii) emc electro-magnetic compatibility functions with powerful grid filtering ability to reduces power supply contamination. iv) internal circuits and components are well-protected by excellent anti-interference design to secure stability and reliability. Input power voltage (v) - 220v+10% input frequency (hz) - 5060 rated input current (a) - 43.6 non-load voltage (v) - 60 output current range (a) - 30-200 rated output voltage (v) - 28 rated duty cycle - 60 no-load loss (w) - 40 efficiency (%) - 80 power factor - 0.73 insulation class - f protection class - ip21 weight (kg) - 9.5 size of the machine (mm) - 391x154x287

We offer Arc Welding Machine ->mma/tig/smaw/gtaw Welding Machines. MMA process use drooping characteristic power source and consumable electrodes which produces arc by scratching the electrode with the job forming a short circuit. It is only when the short circuit is broken, arc is formed and the main welding current starts flowing. Welding takes place as the electrode gets fused with the job under the cover of the slag. In case of TIG, arc starts between tungsten electrode (non-consumable) and the job under the cover of inert gas. Arc is started by scratching the tungsten electrode with the job or using a high frequency unit which initiates the arc between the tungsten electrode and the job.

We make use of raw material of paramount quality that is procured from reputed vendors while manufacturing our Arc Welding Machines.

Arc welding machine feature adopts advanced mosfet technology. Auto protection against over voltage, over current and thermal protection. Soft switching technology brings higher efficiency and more stable performance. Arc dig function, good arc stability, less spatter and satisfactory welding appearance. High welding quality, deep bath and strong weld strength. Suitable for all kind of basic rods. Model arc 200g input supply input voltage 230vacâ±15% frequency 5060hz power factor 0.73 output no load voltage 59v output voltage 28v duty cycle 60% efficiency 80% insulation grade f housing protection grade ip21 max. Electrode diameter 3.2 mm output current 30-200 package net weight 8 kg dimension 375x155x232 mm

MMA process use drooping characteristic power source and consumable electrodes which produces arc by scratching the electrode with the job forming a short circuit. It is only when the short circuit is broken, arc is formed and the main welding current starts flowing. Welding takes place as the electrode gets fused with the job under the cover of the slag. In case of TIG, arc starts between tungsten electrode (non-consumable) and the job under the cover of inert gas. Arc is started by scratching the tungsten electrode with the job or using a high frequency unit which initiates the arc between the tungsten electrode and the job.

Welding Process: - The Saw Blades or Wire Ends to be joined should be cut straight, exactly at right angles and free from burrs on special shearing attachment (optional equipment) - Welding Current, Upsetting Pressure and Upsetting Way are set according to the blade width - The blade ends are rigidly clamped in special quick acting clamps provided on the machine - By depressing the welding lever, the welding process begins - The two ends are heated to forging temperatures in a few seconds and are then automatically forged (upset). The welding current switches off automatically - The job is de-clamped and the weld completed Process for Annealing: The upsetting way switch lever is now turned to annealing and the job is clamped again with the extended jaw distance which comes in automatically on flipping the lever to annealing position. - By pressing the annealing switch on which two heat positions are provided, the job is annealed in order to normalize the brittleness of the welded area. - Depending on the type of material, the annealing process should be repeated several times if need be. Shearing Attachment (optional): Special shears with arrangement for mounting on the front of the machine are available Grinding Attachment (optional): Grinding attachment mounted on top of the machine is necessary for removing the welding flash

Applications Butt and fillet welding of carbon steel for pressure vessels, tubes, ships. Characteristics on Usage 1. Use welding grade Ar 100% gas. 2. All position welding and steel sheet welding can be performed quite easily. 3. Most suitable for one- side welding of tubes.

Creating a niche of Arc Welding Machine such as Arc 200, Arc 250, Arc 300, Arc 400 MOS and Heavy Duty Welding Machine at its best, with utmost quality. Features: Smooth Edges Easy to maintain Better Performance

Induction Brazing Machine, 3 Phase DC Seam Welding Machin