A.T.E. PRIVATE LIMITED Andheri West, Mumbai, Maharashtra

Every detail of the ZinserSpeed 5M is geared to maximum productivity through reliable, time-saving operation. The ZinserSpeed 5M is not only energy efficient but manages power outages as well, through an in-built power failure bridging device. The ZinserSpeed 5M also enables high speed production through four independent drive axis, de-centralised spindle drive motors, and the intelligent software control EasySpin.

Xorella XO Smart vacuum conditioning and heat setting machines are suitable for all low temperature treatment applications up to 95ºC, and are available in four sizes. The XO Smart is suitable for the conditioning and humidification of textile fibres, yarns, and fabrics with natural moisture retention. It utilises the innovative XO-Steaming process which produces reliable and consistent results, through sustainable technology that enables the lowest energy and water consumption and meets the lowest process costs and highest quality requirements. The XO Smart is suitable for cotton blends in short staple spinning, filament and glass fibres. It can also be used for print setting, acrylic bulking, and pre-shrinking.

The XO Select is highly customisable and can be tailored to fit specific requirements. The XO Select uses the XO-Process for vacuum steaming of textiles which uses 100% saturated steam and the renowned XO-Intermediate Vacuum Procedure. Suitable for the conditioning and humidification of textiles, the XO Select guarantees even treatment of the textile material with low energy consumption. While simple in design, the XO Select is manufactured to meet all international safety and quality standards and embodies Swiss reliability and precision engineering. Options with both semi- and fully-automatic load systems are available.

TeraSpin weighting arms are characterised by their robust design and corrosion resistant finish. Not only are these weighting arms built to last the lifetime of the ring frame or roving frame, but each weighting arm exerts the same load on top rollers irrespective of how long they are in use or at what position in the machine they are fastened. Loading springs used on TeraSpin weighting arms are pre-calibrated for specified loads for an unlimited period of time.

Specialities : Single piece ergonomic lifting knob Maintenance-free Etc.

Luwa's Waste Separator is equipped to separate the waste to feed to silos or presses and is designed to work in sync with other Luwa components. The waste is separated by a rotating screen drum. Some part of the waste can be recycled while the rest can be disposed off properly.

Feature : Separated waste material can be fed to presses or recycling machines Rotating drum ensures Etc.

The consolidated success of the �Volufil technology� and the new demand for different yarns for diversified fabric applications, has led to several new developments in machine technology. The new Volufil Multicone represents these developments as per the new market requirements. As a matter of fact, Savio has extended the technological process on acrylic heat-set yarn, special yarn (chenille) and traditional HB Acrylic fibre, also blended with wool and elastomeric filaments. The new drumless winding system �Multicone� allows the best solution for any yarn type and package format with different traverse take-up. The Multicone technology allows the tailoring of the package for different end uses (dyeing, knitting, etc.) with simple settings on the PC.

Purity : Number of winding heads: 25-30-35-40-45. With automatic doffing Uses: bulking of acrylic yarn, HB and blends also with elastomers, wool, and blend-set yarn. Heat-setting Etc.

Valstat® VS 20 AC static charge eliminators are low-priced shock-less static discharge bars, designed for neutralising electrostatic charges from moving surfaces. Electrodes, provided along the active length of the bar, generate ions of both polarities, ensuring that positive and negative charges are removed from the charged target. Valstat® PS 70 S power sources are designed to provide high voltage AC supply to Valstat® VS 20 static eliminating bars. They give stable high voltage output even under severe conditions.

Valstat® VS 20 AC static charge eliminators are low-priced shock-less static discharge bars, designed for neutralising electrostatic charges from moving surfaces. Electrodes, provided along the active length of the bar, generate ions of both polarities, ensuring that positive and negative charges are removed from the charged target. Valstat® PS 70 S power sources are designed to provide high voltage AC supply to Valstat® VS 20 static eliminating bars. They give stable high voltage output even under severe conditions.

Feature : Shock-less; no damage when electrodes are earthed Powder coated aluminum and engineered plastic construction Discharge range of 10-40 mm Etc.

Valstat® VS 20 AC static charge eliminators are low-priced shock-less static discharge bars, designed for neutralising electrostatic charges from moving surfaces. Electrodes, provided along the active length of the bar, generate ions of both polarities, ensuring that positive and negative charges are removed from the charged target. Valstat® PS 70 S power sources are designed to provide high voltage AC supply to Valstat® VS 20 static eliminating bars. They give stable high voltage output even under severe conditions.

Feature : Shock-less; no damage when electrodes are earthed Powder coated aluminum and engineered plastic construction Etc

Valstat® VR 20 AC static charge eliminators are high-end, shock-less static eliminating bars, designed for neutralising electrostatic charges from very fast moving surfaces. Electrodes, provided along the active length of the bar, generate ions of both polarities, ensuring that positive and negative charges are very quickly and effecively removed from the charged target. VR 20 bars are powered by Valstat® PS 70 R power sources, to provide a compact, sturdy, and extremely efficient system for removal of electrostatic charges in almost all industrial applications.

Feature : Shock-less; no damage when electrodes are earthed Engineered plastic enclosure, with epoxy encapsulated parts Discharge range of 80 mm, under ideal conditions Regular sizes for web widths up to 4.5 m Etc.

Valstat® VR 20 AC static charge eliminators are high-end, shock-less static eliminating bars, designed for neutralising electrostatic charges from very fast moving surfaces. Electrodes, provided along the active length of the bar, generate ions of both polarities, ensuring that positive and negative charges are very quickly and effecively removed from the charged target. VR 20 bars are powered by Valstat® PS 70 R power sources, to provide a compact, sturdy, and extremely efficient system for removal of electrostatic charges in almost all industrial applications.

Feature : Shock-less; no damage when electrodes are earthed Engineered plastic enclosure, with epoxy encapsulated parts Discharge range of 80 mm, under ideal conditions Regular sizes for web widths up to 4.5 m Etc

The passive discharge brushes are made of filaments that are very soft extremely durable. Thus, there are no chances of scratches on the web even if brush fibres are in contact with the web. These are non-powered and perform more efficiently when the electrostatic charge on the web is high. Being passive static discharge elements that require no power, these are ideally suited for mounting in explosive environments. A Valstat® static discharge brush, positioned very close or just about touching the charged web will minimise the electrostatic charge from the substrate and send it to ground. Valstat® passive discharge brushes can be combined with Valstat active static eliminating bars to provide a potent static elimination tool for virtually any web-fed application.

The Valstat® static charge eliminator makes sure that the web entering the WCS is free of static charges; thereby enabling the web to easily let go dust particles from its surface. The WCS is specially designed to break the boundary layer of air that accompanies fast moving webs. Vacuum is then used to effectively suck out loose dust from the web. The WCS can be positioned in any orientation and uses the air from the AFU to clean the web. The output web is thus relatively free of dust and contaminants. Either or both sides of the web can be cleaned, depending on the application. The AFU, housed in a compact foot mounted mild steel enclosure, provides necessary suction pressure for the WCS. The AFU comprises of a high-pressure blower with a provision to adjust the quantum of air to suit the specific job being run. A two-part, easily detachable filter strains dust particles down to 5 µm.

Speciality : Strains micron-level dust particles (up to 5 µm) Can be positioned in any orientation; either or both sides of the web can be cleaned Eliminates static charges from fast moving webs by breaking the boundary layer of air Etc

Ionising air nozzles provide a shower of ionised air to remove electrostatic charges andor clean parts and components. The Valstat® IN 10 ionising air nozzle has ionising (ionizing) electrodes positioned in the air flow path, which convert ordinary compressed air into an ionised air shower. Positive and negative ions in the shower of air effectively neutralize electrostatic charges on the target and the air shower also cleans the target. This is useful in applications where sheets, bottles, containers, components made of plastic or paper are manufactured or processed. The Valstat® IN 10 G ionising air gun is also offered by Valence; the IN 10 G is a combination of an air gun and an ionising air nozzle. Electrical input to Valstat® ionising nozzle and air guns is from a Valstat® PS 70 R power source. Air inlet is to be provided from the shop floor compressed air source.

Ionising air nozzles provide a shower of ionised air to remove electrostatic charges andor clean parts and components. The Valstat® IN 10 ionising air nozzle has ionising (ionizing) electrodes positioned in the air flow path, which convert ordinary compressed air into an ionised air shower. Positive and negative ions in the shower of air effectively neutralize electrostatic charges on the target and the air shower also cleans the target. This is useful in applications where sheets, bottles, containers, components made of plastic or paper are manufactured or processed. The Valstat® IN 10 G ionising air gun is also offered by Valence; the IN 10 G is a combination of an air gun and an ionising air nozzle. Electrical input to Valstat® ionising nozzle and air guns is from a Valstat® PS 70 R power source. Air inlet is to be provided from the shop floor compressed air source.

The Valstat® ionising air knife neutralises static charges and removes dust as parts proceed into the process area by providing an anti-static blanket of high velocity air. This assures quality and minimises rejection rates. Typical examples include automated paint or process lines.

The Valstat® BS 11 provides a flow of ionised air which can ideally travel over a distance of 500 mm, thereby eliminating static from a stationary or moving object. Valstat® PS 70 R power sources are designed to provide high voltage AC supply to the Valstat® BS 11 static eliminator. They give stable high voltage output even under severe conditions.

Valstat® Contact Web Cleaner is a combination of tacky contact cleaning roller and an adhesive roll with replaceable adhesive sheets. Static charge eliminators, positioned before and after web cleaner make sure that the web entering and exiting is free of static charges. The tacky roller covering is made of a specially designed polymer. This picks up loose dust, dirt and contaminants from moving web and transfers them to a pre-sheeted adhesive roll. The output web is thus free of contaminants.

Feature : Suitable for various web widths up to 2.5 m Provides economical cleaning options with replaceable tacky roller covering Spare adhesive roll and roll covering easily available Ect

The Valstat® CS 11 static eliminator is an ionising blower used to blow ionisied air on any 3D2D object on which static is to be neutralised. It consists of a single phase motor with a double inlet impeller and Valstat® static eliminating units. Ambient air is drawn from either side of the blower and blown over the static eliminating bars, provided at the outlet. This results in an ionised air flow that effectively eliminates static over a wide range. Under ideal conditions, the target can be as far as 1000 mm. At closer distances, the Valstat® CS 11 can be used as an anti-static blow off cleaner. Valstat® PS 70 R power sources are designed to provide high voltage AC supply to Valstat® CS 11 static eliminators. They give stable high voltage output even under severe conditions.

Feature : Powder coated, mild steel construction Weight 12 kg; dimensions (in mm): 510 L × 160 W × 450 H Noise level less than 80 dBA at 1 m distance Air volume of 620 cubic metre per hour Power consumption 100 W Etc

The Valstat® CS 11 static eliminator is an ionising blower used to blow ionisied air on any 3D2D object on which static is to be neutralised. It consists of a single phase motor with a double inlet impeller and Valstat® static eliminating units. Ambient air is drawn from either side of the blower and blown over the static eliminating bars, provided at the outlet. This results in an ionised air flow that effectively eliminates static over a wide range. Under ideal conditions, the target can be as far as 1000 mm. At closer distances, the Valstat® CS 11 can be used as an anti-static blow off cleaner. Valstat® PS 70 R power sources are designed to provide high voltage AC supply to Valstat® CS 11 static eliminators. They give stable high voltage output even under severe conditions.

Feature : Powder coated, mild steel construction Weight 12 kg; dimensions (in mm): 510 L × 160 W × 450 H Noise level less than 80 dBA at 1 m distance Air volume of 620 cubic metre per hour Power consumption 100 W Etc.

Static electricity accumulates on the human body, as you walk and move about. Charges can build up to high levels when the relative humidity is low or due to sudden changes in temperature. Another reason a charge build up is a phenomenon called induction. If you are in the vicinity of a material or a process that has or generates high levels of static, you can pick up significant charges. When static charges equivalent to 3000 V or more builds up within you, your body receives a shock when you touch grounded material or another object of lesser potential. Sparks can at times fly off, which can be potentially hazardous if the atmosphere has gases or liquids or materials having a low explosion level or flash point. Valstat® antistatic touchpads can be placed at strategic locations like desks, walls, partition, filing racks, machines etc. Touching this pad will eliminate uncomfortable shocks to workers, protect your equipment, and avoid sparks leading to potentially dangerous situations. By only touching the pad for a few seconds, operators and workers are free of electrostatic charge build-up and are thus safe from an electrostatic discharge.

Feature : Static dissipative layer to ground unwanted charges Etc.

Studies have shown that warm or hot ink is a major dampener to pressroom economics. Warm or hot ink lowers print quality by destroying the dot structure and it causes increased use of inks and solvents. By maintaining the ink temperature, the Valflow® ITS reduces the consumption of inks and solvents and ensures repeatability in print quality. Using a temperature sensor and a solenoid valve for water flow, a temperature controller ensures that the ink temperature is kept at the set value during machine operation and also between stoppages, thereby maintaining print quality. These are offered in OEM as well as end-user packages and can be tailored to suit existing machine upgrades.

Valflow® ink tanks are round in shape, to improve circulation and eliminate dead spots in corners where heavier materials can drop out and stagnate causing viscosity and colour issues. Customised, and OEM tanks and lids are available on request. Tank capacity is selected based on the amount of ink consumed by the press, length of run, the chamber or ink tray capacity, and the amount of ink that drains back into the tank from the print deck, hoses, and filters once the pump is stopped.

Valflow® filters can be used on rotogravure printing, coating, and laminating lines to remove contaminants in inks, coats, and adhesives through mechanical (filter mesh) and magnetic means, thus ensuring good print or coat quality. Valflow® filters perform two major functions – circulating along with the ink or coats are contaminants from three major sources: air (that carries dust and fiber), doctor blades (a source of metallic particles), and fluids (that contain undissolved solids and pigments). Valflow® filters capture these contaminants and allow only clean fluid to pass through, thus ensuring good print or coat quality. The standard Valflow® ink filter is designed for centrifugal pumps. For diaphragm pumps, the filter has a built-in surge suppressor function.

Datatex MCM is a flexible graphical tool supporting single users for single facilities or multiple departmental users for singlemultiple facilities. Moreover, the planner, if empowered, can change the production schedule with a specific tool.

Purity : MCM is a finite/infinite planning graphic tool Helps in planning the organising of all production requirements such as machine capacity, compatibility Etc.

Looking at the textile production cycle, mills are continuously improving the efficiency of weaving cloth, thanks to organisation and loom technology improvements. On the other hand, the output of the looms must always be controlled, to ensure the required fabric quality and to identify production problems. Inspection, being labour intensive, is costly and often its effectiveness needs to be improved.

Looking at the textile production cycle, mills are continuously improving the efficiency of weaving cloth, thanks to organisation and loom technology improvements. On the other hand, the output of the looms must always be controlled, to ensure the required fabric quality and to identify production problems. Inspection, being labour intensive, is costly and often its effectiveness needs to be improved.

Using business-specific data capsules, BI gives powerful and essential insights into informed decision-making and enables the corporate strategy to be linked to operational plans.

Purity : ntegrated architecture for reporting, viewing, querying, analysing, and running Corporate Performance Management applications Self-service business user view of data Etc