Canopus Instruments Kalyan, Mumbai, Maharashtra

The frequency to current converter available at Canopus Instruments will give you accurate analog conversion. The f to v converter manufactured by Canopus Instruments are of highest quality and standard. Get in touch with us to know the details of the products.The SIM µ 2.0 Freq. to VI converter accepts a Frequency Input and provides an optically isolated analog DC voltage or current output that is linearly proportional to the input frequency variation. The Frequency to V or mA converter provides very accurate analog conversion accuracies from 10% of input range onwards. Below this value of input frequency, the output analog value exhibits ripple due to the inherent limitation of the capacitive filter at the output at low frequency.

Canopus Instruments is one of the top manufacturers and suppliers of ndt ultrasonic testing, concrete testing, ultrasonic testing machine, ultrasonic pulse velocity tester, upv meter in India. The ndt ultrasonic testing, concrete testing, ultrasonic testing machine, ultrasonic pulse velocity tester, upv meter that Canopus manufactures are of top quality and highest standards. Offering ultrasonic testing machine, testing equipment, ultrasonic pulse velocity tester and ultrasonic testing equipment in India we are the largest concrete testing equipment manufacturers and suppliers. Get in touch with us to know the details of the products.

Canopus Instruments is one of the top manufacturers & suppliers of concrete ultrasonic equipment, concrete ultrasonic testing, upv meter, ndt testing , composites India. The concrete ultrasonic equipment, concrete ultrasonic testing, upv meter, ndt testing of rock, timber, ceramics, composites, graphite that Canopus manufactures are of top quality and highest standards. Get in touch with us to know the details of the products.

CUTE 102A is a portable apparatus for Non-Destructive evaluation of concrete quality by Ultrasonic Pulse Velocity (UPV) measurement method. It is used to measure the transmission time of ultrasonic pulses in the test specimen, from which the velocity can be computed. A set of UPV readings can be used for further interpretations of structural concrete. The equipment is designed to comply with the recommendations of BS 1881 (Parts 210 & 203), ASTM C 597-71 (Reapproved 1979) and IS-13311 (Part I); 1992.The Instrument generate pulse of ultrasonic frequency, which are coupled into the concrete specimen under test by the transmitting transducer. The receiving transducer is used to detect these pulses & to convert them back into electrical pulses. Suitable coupling media are used to minimize the losses due to acoustic mismatch at the transducer-specimen interfaces. A 10MHz Quartz time base ensures accurate measurement of pulse transit time (T) with a resolution of 0.1 microsecond. The path Length (L) can be measured with a tape & hence the Ultrasonic Pulse Velocity (UPV) in the specimen under test can be computed as, V = LT The CUTE 102A is a fully portable model with facility for using 12 V DC as well as 230 V AC supply. A liquid crystal display (LCD) provided on the front panel ensures good readability during outdoor use. The equipment is applicable for estimation of properties of concrete such as strength, uniformity, crack depths, etc.

Canopus Instruments is one of the top manufacturers & suppliers of Ultrasonic Test Device, concrete ultrasonic testing equipment in India. The Ultrasonic Test Device, concrete ultrasonic testing equipment that Canopus manufactures are of top quality and highest standards. Get in touch with us to know the details of the products,the Ultrasonic Pulse Velocity (UPV) in the specimen under test can be computed as, V = LT.

CUTE 103 is Portable instrument designed with advanced features for Non-destructive Testing (NDT) of concrete quality by Ultrasonic Pulse Velocity (UPV) measurement method. Applications include estimation of properties of concrete such as strength, uniformity, crack depths, etc.CUTE 103 comes with our experience of over 20 years in design and manufacturing of UPV measuring instruments for concrete testing. Several new features are added over our earlier popular model CUTE102 series and it incorporates state of the art technology in the design.The instrument is designed to comply with the recommendations of BS EN 12504-4:2004, ASTM C597-71 (re-approved 1979) and IS 13311(Part I); 1992.

Availability : 1.90 Kg. 54 KHz transducer : 900 Gm each X 2 nos.

emperature detector, temperature scanner, 16 channel temperature scanner in India. The rtd temperature scanners, resistance temperature detector, temperature scanner, 16 channel temperature scanner that Canopus manufactures are of top quality and highest standards. Get in touch with us to know the details of the products.Software algorithms are implemented to filter the signal noise and to COMPENSATE FOR THE NON-LINEARITY ARISING DUE TO RTD response characteristics. The instrument has the facility to periodically interrogate the sensor inputs to detect SENSOR FAULT conditions. This is extremely useful in monitoring abnormal conditions such as Wire Break or Burn-Out of RTD’s in a running process.

The CANPWR 1.0 Powerline Transducers for Single Phase measurements are useful in remote monitoring of Pow measurements erline parameters. These are intelligent Transducers designed with the latest state of art technology and provide flexibility of SW configuring the parameters to suit the application requirements.True RMS measurement of Input Voltage (Vac) & Current (Iac) ensures accuracy in measurement and computation of various parameters, Viz. Vac, Iac, Frequency, Power Factor, Power (ActiveReactiveApparent). (ActiveReactiveApparent).The CANPWR 1.0 Powerline Transducers interface with AC voltage (e.g. 0-110230440 V) & AC Current (CT signals: 0-1A, 0-5A) inputs to provide isolated 0-10V4-20mA DC output accurately proportional to the parameter to be measured. Provision is available for up to 4 nos. of Isolated 0-10V4-20mA outputs to enable interface with multiple data acquisition systems. Additionally, RS485

Number Of Flower : Transducer

The input 4-20mA Signal from a transmitter is measured and converted into isolated 4-20mA Output signal which is exact replica of the input signal. The Circuit on the input side draws power from the 4-20mA input being measured and the output circuit draws power from the 4-20mA 2-wire Output connection. Thus no separate external power supply is needed for the unit. Optical Isolation is provided internally to isolate the input and output signals.

With an experience of over two and a half decades Canopus Instruments is considered as one of the biggest company committed to providing top quality analog device, signal conditioning unit around India. The Signal conditioning unit and analog device find applications where it is of prime importance to ensure liable performance. These modules eliminate occurrences of faulty measurements in process control equipment caused by ground loops. They are also necessary to protect the measuring equipment from noise and transients generated due to inductive load switching and other unpredictable electrical disturbances occurring in the field.

The PROFI-BCD System is basically a modular Profibus DP V0 based slave system. This system consists of Profibus slave Communication Module (CM) having up to max. 16 no. of intelligent BCD display Sub Modules (SM). The CM communicates with the SM’s via a local two-wire CAN bus communication. The data received from the Profibus master for each SM is transferred on this local bus (CAN bus) to be displayed on the BCD meter display.Each BCD meter SM is configured with the help of Profibus master. This system offers the user the flexibility of individually configuring the SM’s as per the application requirement. It also offers the option of choosing different BCD meter sizes in single system to suit the visibility and operator comfort.

igital indicator, digital process indicator, digital panel indicators in India. The digital indicator, digital process indicator, digital panel indicators that Canopus manufactures are of top quality and highest standards. Get in touch with us to know the details of the products.igital indicator, digital process indicator, digital panel indicators in India. The digital indicator, digital process indicator, digital panel indicators that Canopus manufactures are of top quality and highest standards. Get in touch with us to know the details of the products.

Canopus Instruments is one of the top manufacturers & suppliers of rtd scanner, resistance temperature detector, temperature scanner, 16 channel temperature scanner in India. The rtd temperature scanners, resistance temperature detector, temperature scanner, 16 channel temperature scanner that Canopus manufactures are of top quality and highest standards. Get in touch with us to know the details of the products.CANSCAN 1.0 is Multi Channel Scanner designed to interface with 8 12 16 Channels of 3-Wire RTD PT-100 inputs as per the user requirement. The input channels are sequentially scanned and displayed on the front panel. Measured values are compared with set points to generate Alarm conditions.

Brand Name : Canopus Instruments

Canopus Instruments is one of the top manufacturers & suppliers of relay interface module and 12 channel relay module in India. The relay interface module and 12 channel relay module that Canopus manufactures are of top quality and highest standards. Get in touch with us to know the details of the products.Relay interface modules are available in different channel densities viz 1, 2, 4 & 8 channel Relay Interface Module and choice of features such as with without fuse and with without relay mounting base.

Relay interface modules are available in different channel densities viz 1, 2, 4 & 8 channel Relay Interface Module and choice of features such as with without fuse and with without relay mounting base.

process controllers. The instrumentation and process control that Canopus manufactures are of top quality. Canopus Instruments is a leading manufacturer of process control products in India. We provide a wide range with top quality in process controller, process indicators. Being the best process control equipment manufacturers we strive to derive customer satisfaction. We provide the best quality of products which are well known for its effective functioning. Get in touch with us to know the details of the products.

Canopus Instruments is one of the top manufacturers and suppliers of process controllers. The instrumentation and process control that Canopus manufactures are of top quality. Canopus Instruments is a leading manufacturer of process control products in India. We provide a wide range with top quality in process controller, process indicators. Being the best process control equipment manufacturers we strive to derive customer satisfaction. We provide the best quality of products which are well known for its effective functioning. Get in touch with us to know the details of the products.

The Load Cell Amplifier is a precision amplifier with In-Built Reference Voltage Source for interfacing with the Strain Gauge Bridge type Load Cells. The unit provides a highly stable temperature compensated 10V reference voltage source for excitation of the Load Cell. The differential milliVolt (mV) output of the Load Cell is Amplified and Filtered by the unit to provide isolated 0-10V or 4-20mA output linearly proportional to the Load Cell mV signal. Provision for TARE adjustment is useful in setting 0V (or 4mA) output for No-load condition to compensate for the Dead Weight of the system.

Brand Name : Canopus Instrument

The ndt ultrasonic testing, concrete testing, ultrasonic testing machine, ultrasonic pulse velocity tester, upv meter that Canopus manufactures are of top quality and highest standards.

Availability : 500 gms

The input 4-20mA Signal from a transmitter is measured and converted into isolated 4-20mA Output signal which is exact replica of the input signal. The Circuit on the input side draws power from the 4-20mA input being measured and the output circuit draws power from the 4-20mA 2-wire Output connection. Thus no separate external power supply is needed for the unit. Optical Isolation is provided internally to isolate the input and output signals.

Power : 4-20mA 2