Carbon Steel Seamless Pipes Dealers in Mumbai

We offer Seamless Carbon Steel Pipes. SeamlessErw Pipes,Sheets,Plates,Rods,Perforated Sheets,Wire-Mesh,Wire etc.of Grades ASTM A-106 GR.B, A-333GR, 1 & 6, IS 1239 & 3589 etc.

We are a well-established Carbon Steel Seamless Pipes Manufacturer, Exporter and Supplier. The range of Carbon Steel Seamless Pipes, offered by us, has high tensile strength, hardness and internal finish. These Carbon Steel Seamless Pipes are precisely designed, and are suitable for nuclear power plants, fossil fuel plant and marine applications. We are capable of offering these Carbon Steel Seamless Pipes in several sizes, thicknesses and specifications according to the requirements of clients. We have with us, bulk storage facilities and efficient delivery mechanism to timely supply and export large consignments. The company has priced these Carbon Steel Seamless Pipes very reasonably.   Attributes : Corrosion resistant Sturdy High strength Superior performance Fit for a wide range of applications   Grade Details : ASTM A 106 GR. B ASTM A 53 GR. B API 5L GR. B IS 1978 YST 210 IS 1978 YST 240 DIN 17175 ST 35.8 DIN 17175 ST 45.8 DIN 17175 ST 52.0 CS Seamless Pipes : Range :½" NB TO 24" NB IN SCH 20, 30, STD, 40, 60, 80, XS, 100, 120, 140, 160 & XXS as Per NACE MR 01 75Type :SEAMLESS WELDED Form :Round, Square, Rectangular, Hydraulic Etc. Length :Single Random, Double Random & Cut LengthEND :Plain End, Bevelled End, ThreadedCoating On Pipe :» Epoxy» Fusion Bonded Epoxy Coating - FBE Coating» Three Layer Polyethylene Coating - 3LPE Coating» Three Layer Polypropelene Coating - 3LPP Coating» Coaltar Enamel Coating - CTE Coating» Cement Mortar Lining Coating» Concrete Weight Coating Satndard: ASTM ASME A 53 GR. A & B , ASTM A 106 GR. A , B & C . API 5L GR. B , API 5L X 42Grade: API 5L Grade B  Value Added Services :» Coating» Hot Dip Galvanizing» Bending» Draw & Expansion» Horning» Customized Pipe Alloy Seamless Pipes : Range :½" NB TO 24" NB IN SCH 20 , 30, STD, 40 , 60 , 80 , XS , 100 , 120 , 140 , 160 & XXS as Per NACE MR 01 75 Type :SEAMLESS FABRICATEDlength :Single Random, Double Random & Cut Length End :Plain End, Bevelled End, ThreadedAlloy Steel PipeStandard :ASTM ASME A 33Grade :Gr P 1, P 5, P 9, P 11, P 12, P 22, P 23, P 91Value Added Sevices» Bending » Draw & Expansion» Customized Pipe Nickel & Copper Alloy Pipes: Range : Nickel ½" NB TO 12" NB IN SCH 5, 10, 20, 40, STD, 60, 80, XSCopper : 1½" OD to 6" OD in 22swg, 20swg, 18swg, 16swg, 14swg, 12swg, 10swg. TYPE :SEAMLESS WELDEDLength :Single Random & Cut Length End :Plain End, Bevelled End, ThreadedNickel Copper Alloy Pipe :» ASTM ASME SB 161 UNS 2200 - NICKEL 200 Pipe» ASTM ASME SB 161 UNS 2201 - NICKEL 201 Pipe» ASTM ASME SB 165 UNS 4400 - MONEL 400 Pipe» ASTM ASME SB 464 UNS 8020 - ALLOY 20 Pipe» ASTM ASME SB 423 UNS 8825 - INCONEL 825 Pipe» ASTM ASME SB 167 517 UNS 6600 - INCONEL 600 Pipe» ASTM ASME SB 167 UNS 6601 - INCONEL 601 Pipe» ASTM ASME SB 444 UNS 6625 - INCONEL 625 Pipe» ASTM ASME SB 622619626 UNS 10276 - HASTELLOY C 276 PipeValue Added Services :» Bending» Draw & Expansion» Customized Pipe Features: Dimensional accuracy Premium strength Decay resistance and lasting performance These pipes are used in : Heat-exchangers Condenser Boiler Economizers Super-heater Pre-heater Oil coolers

The company is one of the prominent Low Temperature Carbon Steel Seamless Pipes Manufacturers, Exporters, and Suppliers in India. The Low Temperature Carbon Steel Seamless Pipes, that we provide, are available in different specifications to meet varying industrial applications. Our Low Temperature Carbon Steel Seamless Pipes are available at affordable prices. These Low Temperature Carbon Steel Seamless Pipes are used in petroleum and gas pipe line sectors. Confirming To : ASTM A 333 GR. 6 Known For : Excellent corrosion resistanceOutstanding strengthHigh-grade carbon steelSuperb durability.

We are one of the prominent exporter and supplier of premium-quality carbon steel seamless pipes. They are fabricated in compliance with industrial quality standards and are highly acclaimed for their robust designs and durability. Their sturdiness makes them damage-resistant to a large extent. These pipes are well-known for being dimensionally accurate and can be easily installed anywhere with utmost ease. They can also be easily cut. They have minimal maintenance requirements. They are rust-resistant to and abrasion-proof. They do not get damaged despite repeated contact with water or moisture. Our clients are able to easily access our products from us at affordable rates. They are also exported to our overseas clients in a timely and efficient manner. They are economically priced. Technical data: grade : astm a106 gr b, api 5l grade b. Size : 12" nb to 24"nb thickness : from sch 10 to sch xxs type : seamless forms : rectangle , square , oval. features: easy to install low maintenance corrosion-resistant

Established as a dignified name, we are the celebrated organization in the market offering quality A333 GR. 3/6 Carbon Steel Seamless Pipes. We can carry out excellent supply chain management, as we have an ultramodern warehouse and the latest inventory control systems. Both help us meet bulk requirements and save us from stock out situations.   Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0175 / ISO 15156, NACE MR-01-03 / NACE MR-01-75 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd’s Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3   A333 GR 3/6 Carbon Steel Seamless Pipe Useful Info This specification covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. Several grades of  steel are included as listed in Table 1. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect in low-temperature impact properties. The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.   This specification covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. Several grades of ferritic steel are included. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties.   Mechanical Testing : Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.   For material heat treated by the continuous process, tests shall be made on a sufficient number of pipes to constitute 5% of the lot, but in no case less than 2 pipe.   Hydrostatic Test : Impact Test –  One notched bar impact test, consisting of breaking three specimens shall be made from each heat represented in a heat-treatment load on specimens taken from the finished pipe.   Carbon Steel Seamless Pipe Application : Buildings, infrastructure, tools, ships, automobiles, machines and appliances are all made from steel. Steel is frequently used because it is durable and safe. Building materials underground may be susceptible to rotting and pests. Since steel is non-combustible and makes it harder for fire to spread, it is good to use when building homes. ASTM A106 Carbon steel pipe is highly resistant to shock and vibration. A333 GR 3/6 Carbon Steel Seamless Pipe is Environmentally Friendly as well Cost-Effective.   Carbon steel pipe – Examples of use : Bridges, Flood control, Harbors and airports, Building construction, Petroleum and natural gas, Wind power generation, Solar power and solar heat power generation, Geothermal power generation, Batteries and power devices etc.   API X Grades - some of the sturdiest pipes and tubing available designed for extreme environments or exceedingly high pressure environments   A333 GR 3/6 Carbon Steel Seamless Pipe features: The American Petroleum Institute specification API 5L covers seamless and welded steel line pipe. API 5L, 45th Edition / ISO 3183 This is steel pipe for pipeline transportation systems in the petroleum and natural gas industries A333 GR 3/6 Carbon Steel Seamless Pipe is suitable for conveying gas, water, and oil. A333 GR 3/6 Carbon Steel Seamless Pipe, high yield seamless pipes, modified to suit offshore structural purposes. Suitable for weldable structural steels for fixed offshore structures Eckhardt Steel & Alloys’ seamless and extra long ERW API 5L Line Pipe for dependable transmission of oil and gas to any type of collection and distribution point.   A333 GR 3/6 Carbon Steel Seamless Pipe Advantages: As only the edges are heated, the tube possesses dean accurate surface. Safety is better than smls pipe. The cost is cheaper than smls pipe and LSAW pipe. Manufacturing speed is quicker than seamless pipe or sub merged welded pipes As only the edges are heated, the tube possesses dean accurate surface. Safety is better than smls pipe. The cost is cheaper than smls pipe and LSAW pipe. Manufacturing speed is quicker than seamless pipe or sub merged welded pipes

Carbon Steel Seamless Pipes that we manufacture, export and supply are free from any sort of defects and complies with all the industry laid standards. We make use of excellent quality carbon steel in the manufacturing of these Carbon Steel Seamless Pipes. Widely used in various industrial applications, our Carbon Steel Seamless Pipes can be obtained in diverse sizes and thicknesses. Additionally, clients can obtain Carbon Steel Seamless Pipes in various customized options and at competitive prices from us.

We are offering carbon steel seamless pipes seamless carbon steel pipe for high-temperature service in nps 18 to nps 48 inclusive, with nominal (average) wall thickness as given in ansi b 36.10. It shall be permissible to furnish pipe having other dimensions provided such pipe complies with all other requirements of this specification. Pipe ordered under this specification shall be suitable for bending, flanging, and similar forming operations, and for welding. The following grades are available: astm a 106 gr. B astm a 53 gr. B api 5l gr. B is 1978 yst 210 is 1978 yst 240 din 17175 st 35.8 din 17175 st 45.8 din 17175 st 52.0