Electrical Components Dealers in Mumbai

• Number Of Flower: Solid
• Material: Silver
• Shape: Rectangle, Round
• Certification: ISI Certified
• Packaging Type: Grey
• Finishing: Polished
• Country of Origin: India

• Material: Copper
• Frequency sweep: 20 Hz to 20 kHz
• Fixing Type: Single Bolt
• Product type: Tapes and Clamps
• Height: 1-7/8 inches

Manufacturer of Earth Bond Tapes and Clamps Earth Bonding Clamps and Tape   Electrical bonding is the practice of intentionally electrically connecting all exposed metallic noncurrent items in a room or building as protection from electric shock. If a failure of electrical insulation occurs, all bonded metal objects in the room will have substantially the same electrical potential, so that an person of the room cannot touch two objects with significantly different potentials. Even if the connection to a distant earth/ground is lost, the person will be protected from dangerous potential differences.In a building with electricity it is normal for safety reasons to connect all metal objects such as pipes together to the mains earth to form an Equipotential zone. This is done in the developed countries like U.S.A, U.K etc because many buildings are supplied with a single phase supply cable where the neutral and earth conductors are combined. Close to the electricity meter this conductor is divided into two, the earth terminal and the wire going to the neutral bus bar in the consumer unit. In the event of a break in a neutral connection this earth terminal provided by the supply company will be at a potential (relative to the true earth) which is the same as the live wire coming to the home.

• Material: Plastic
• Shape: Round
• Packaging Type: Black
• Power Source: Electric
• Application: Industrial

WE ARE MANUFACTURER AND EXPORTER OF COILS AND SOLENOIDS.

• Packaging Type: Grey
• Shape: Square
• Usage: Electroplating, Galvanising
• Thickness: 10-20mm, 20-30mm
• Packaging Type: Wooden Box

HMS Metal Corporation is a Leader in the production and Supply of Anodes used in copper, zinc and nickel refining. Our electrowinning anodes integrate years of experience, research and development.With fully Integrated & 100% in-house production facility we are able to Internally controlled workmanship for alloying, rolling blade, head bar tinning and casting, welding, cutting & packaging.   Although anodes are manufactured to client’s designs, with each stage of manufacture using the best quality raw materials and controlled by a strict quality process system, anodes are produced efficiently and consistently within estimated time.   Anodes made of lead alloys are used in the electrowinning and plating of metals such as manganese, copper, nickel, and zinc. Rolled lead-calcium-tin and lead antimony alloys are the preferred anode materials in these applications, because of their high resistance to corrosion in the sulfuric acid used in electrolytic solutions. Lead anodes also have high resistance to corrosion by seawater, making them economical to use in systems for the cathodic protection of ships and offshore rigs. Rolled lead anodes have become the industry benchmark with the benefits of fine grain structure, less segregation and elimination of cracks and voids resulting in more uniform corrosion of the anode.   The shape and size of the copper bar and the anode plate are made to customer specifications The copper bar is tin-plated and then given a homogeneous coat of lead several millimeters thick as protection from corrosion caused by aggressive acid mist. This method of protecting the anode bar also ensures the best possible bond between lead and copper for improved current flow and long service life. Chemical Composition The lead anodes are manufactured in calcium-tin-lead (Ca/Sn/Pb), antimonial lead (Sb/Pb) and silver-lead (Ag/Pb) alloys which are the preferred alloys for these applications with their high resistance to corrosion in the sulphuric acid based electrolyte solutions. Lead anode alloys generally consist of tin, Calcium, and Antimony. The favoured alloys, based on the specific application, are lead- antimony as well as lead-Calcium-Tin alloys. One reason for this is because of the alloys’ resistance to corrosion in the sulfuric acid that’s used for electrolytic solutions. (Lead-alloy anodes are used in electro winning – also known as electro extraction – as well as for plating metals such as manganese, copper, nickel, and zinc.) Lead anodes have superior attributes, such as being highly resistant to the corrosive effects of seawater. We also offer custom Lead Alloys to meet your specifications We specialize in manufacturing complete Lead Anode and Anode Plates for Zinc, Nickel and Copper extraction electrolysis plant. Electrowinning of copper, nickel, cobalt and zinc in SX-EW processing of ores. Ca/Sn/Pb alloy is generally used for copper, nickel and cobalt applications. Ag/Pb alloy is the preferred alloy in zinc electrowinning Packing The finished anodes are packed together in wooden pallets with thick thermocol in between each Anode to prevent the individual anodes from bending.Do's & Dont;'s Remember, proper care of anodes will pay off in longer life. Try these suggestions with new Republic anodes. Do not leave new anode in chromium solution when tank is idle. Instead, remove them and place them in clean water after use until a uniform brown film of lead peroxide is formed on the surface. Do not confuse this dark brown lead peroxide coating with lead chromate. Lead chromate (PbCrO4) is yellow in color and acts as an insulation. This should be removed in order to restore the anode to the most efficient service level. We recommend that approximately two inches of lead anode be above the solution level at all times. We do not recommend mixing old and new anodes together. Adding new anodes intermittently in order to obtain amperage needed could result in new anodes scaling up very rapidly. If it is not practical to replace all anodes at one time, we suggest extreme care be given to the new anodes to assure proper breaking in for efficient performance.

• Diameter: 1.0 - 12.0mm
• Length: 50.00, 75.00, 150.00, 175.00mm
• Color mark: WZ3 (brown) WZr8 (white)
• Other impurity: ≤0.20%
• Quality of surface: Ground finish, polish finishing

• Driven Type: Electric
• Packaging Type: Grey
• Condition: New
• Automation Grade: Automatic
• Application: Industrial

FIDVI REFRIGERATION INDUSTRIES \r\nOur company specializes in manufacturing and exporting high-quality industrial goods, notably fin tube heat exchangers and various coil types. 🔩\r\n \r\nThese essential components are designed to optimize heat transfer efficiency in diverse applications. We utilize advanced materials like stainless steel, copper, and aluminum to ensure durability and performance. 🌟\r\n \r\nWith years of expertise, we tailor our products to meet specific industry needs, contributing to energy savings and enhanced operational efficiency.\r\n \r\nCurious about how our solutions can benefit your business? Let\\\'s discuss\r\nI\\\'m On Instagram As @fidvirefrigeration.\r\n \r\n \r\nWhatsapp: CODE NO \r\n \r\n Await Your Reply\r\n \r\n 

• Number Of Flower: Earth Rod
• Material: Copper
• Shape: Round
• Application: Earthing System
• Thickness: 10-20mm, 20-30mm, 30-40mm, 40-50mm, 50-60mm, 60-70mm
• Certification: ISI Certified
• Length: 1-1000mm, 1000-2000mm
• Packaging Type: Light Brown
• Finishing: Polished
• Feature: Corrosion Proof, Excellent Quality, Fine Finishing
• Textures: Solid

• Application: Laboratory
• Brand Name: Ohaus

OHAUS Precision Powers the Starter Electrodes Backed by our commitment to accurate and precise measurement, the OHAUS Starter Series of electrodes are designed to produce exact results time and time again. The Starter Series includes pH, reference, oxidation-reduction potential (ORP), conductivity, dissolved oxygen (DO), and temperature electrodes that can be used in combination with Starter bench and portable meters.   Features: All sturdy and durable electrodes are constructed of either plastic or glass shafts and built to withstand daily use. All electrodes include a temperature sensor, which powers automatic temperature compensation and ensures accurate measurements. All electrodes fit perfectly in the electrode holders on OHAUS bench meters and electrode clips on all OHAUS portable meters.

• Input Main Voltage: 230/415v Ac.
• Voltmeter Range: 0-300/500v Ac.
• Ammeter Range: 5 - 100a Ac.
• Load Range: 1-25 Kw.
• Load Type: Bulb / Resistance / Capacitor / Induction Load
• Note: 3 Phase Load Bank have the Provision for Connecting It Into 3 Phases Star or Delta Mode.

We are well reckoned as one of the supreme Electrical Load Banks Manufacturers and Exporters from India. ME Load Banks are single phase and three phase variable Lamp or resistor or capacitor or Induction load housed in metal case as shown in the diagram. Our Portable Load Banks are provided with castor wheels (except Induction Load) for easy handling. Ammeters and Voltmeters are provided on the front panel to indicate the current and voltage respectively. Also heavy-duty Porcelain switches with bakelite top and inner brass contact or Anchor Switches or MCBs (As per the load capacity) are provided for safety. For Mains ON, MCB is provided. The Load Banks are used to simulate load conditions to test Voltmeters, Ammeters and Wattmeters. Load can be simulated by using the load switches provided on the bench. Total load simulated is sum of the loads of all 'ON' switches. The pictures shown are a three in one unit comprises of Capacitor, Induction and Resistor loads (in order) in single Load Bank. Load Type:- In resistance Load Bank Resistor wire as per required capacity is wound on the porcelain tube; in the same manner Bulbs are provided for bulb load bank (LAMP Bank) and Capacitor are provided for Capacitance load bank. Induction Load Bank is smoothly variable, core balance type inductive load. In this type, the load is increased or decreased by increasing or decreasing the air gap between the coils. In this Rotating knob is provided on the top of the panel for operating the air gap. Operating:- Before switching on the load bank, put all load switches in 'OFF' position. In induction load bank, keep the Coils in closed position, Switch on the Load Bank. Switch on the load switches one by one till the required load is simulated. For Induction Load Bank rotate the knob to increase the air gap and current will start increasing smoothly. Load Voltage & Load Current will be indicated on the Voltmeter & Ammeter respectively on the panel.

• Country of Origin: India
• Number Of Flower: Welding Electrodes
• Material: Stainless Steel
• Thickness: 0-3mm
• Application: Welding Purpose
• Finishing: Polished

• Application: Battery Lab research
• Purity: 99.99%
• Machine name: Platinum Electrode
• Wire Length: 1-2 Feet
• Power Source: 12 V DC

Ideally used for Copper Deposition, the Platinum Iridium Electrodes offered by us are sourced from trustworthy vendors. The Platinum Iridium Electrodes that we deal in are also used in determination of different metals and for oxygen flask basket. Furthermore, these Platinum Iridium Electrodes are provided in different dimensions.

• Number Of Flower: Electronic Testing Equipment
• Input Resistance: 20000 Mega-Ohm
• Detection Capability: Detects Very Low Voltage Gradients
• Display Type: Analog Panel Meter
• Functionality: Detect Coating Defects In Pipelines
• Special Feature: Interruption Mode For Showing ON And OFF Voltage Gradients
• Typical Usage: Cathodic Protection System Maintenance

Sophisticated electronic Milli voltmeter with a 20000 Mega-Ohm input resistance. Analog DCVG Holiday detector is able to detect very low voltage gradients and provide an easy method of finding any coating defect in a pipeline by using analog panel meter. Not only DCVG Holiday Detector is able to show ON and OFF voltage gradient of the pipeline, but it’s also able to show the difference between ON and OFF in interruption mode.

• Number Of Flower: Welding Electrodes
• Material: Nickle Base Alloy
• Packaging Type: White Coating
• Grades Available: Inconel 625, Inconel 600, Incoloy 800, Incoloy 825
• Shapes Available: Different Shapes
• Sizes Available: Various Sizes

We are offering inconel welding electrodes is the nickle base alloy. it is in different grades such as inconel 625 , inconel 600 , incoloy 800 , incoloy 825 . many more available in different shapes & size.

• Shape: Round
• Thickness: 10-20mm
• Length: 1-1000mm
• Finishing: Polished
• Texture: Solid
• Feature: Corrosion Proof, Excellent Quality
• Dimensions: 6 mm x (300
• Hardness: 91-91.5

We are an eminent Supplier of Silver Brazing Welding Rods.  The Rods we make available are acclaimed for their quality, durability and high tensile strength. We offer these in a wide range of compositions to suit specific applications. Courtesy our brilliant logistics network, we are capable of delivering bulk orders of these within the promised time frame. One can obtain these at nominal rates from us.   Features : Rapid wetting High tensile strength Available in various lengths

• Country of Origin: India
• Material: Oxygen Free Copper
• Application: Electroplating Applications, Rotogravure, Electroforming, Decorative Printed Circuitry, Electrical Ground Rod, Electro-forming, Other Functional Plating Applications
• Brand Name: Jams Copper
• Grade: ASTM B265, Grade 5, Grade 9
• Size: Oval - 80mm X 30mm, Ball Minuscule 25mm, Minuscule 38mm, Minuscule 50mm Or As Per Customer Requirement

Product Description:Phosphorous Copper Anode (Cu-DHP) finds usage in the plating of Printed Circuit Boards. These anodes are available in Copper Ingots, Copper Cathodes and Electrolytic Copper options with all copper forms containing in it least 99.9% copper. Free from impurities, these provide the safeguard from contamination of electroplating solutions as well as a Co deposit on the cathode. Further, these are also available in suitable metallurgical condition to dissolve uniformly.General Specifications: Size - Oval - 80mm x 30mm; Ball minuscule 25mm, minuscule 38mm, minuscule 50mm or as per customer requirement Material Standard- ASTM B265, Grade 5, Grade 9 Shape- Oval, Ball Weight - per foot Application Areas: Electroplating Applications Rotogravure Electroforming Decorative Printed Circuitry Electrical Ground Rod Electro-forming Other functional plating applications.   Jans Copper Pvt Ltd is one of the leading Copper Anodes, Copper Balls & Copper Nuggets manufacturer and supplier in India. Jans Copper Pvt Ltd's Copper Anodes, Copper Balls & Copper Nuggets are manufactured in accordance with the defined international standards. The raw material that is used to manufacture SIMCO copper products are LME grade ‘A’ cathodes of purity greater than 99.99% copper resulting in higher conductivity, crack free extrusion, excellent finish and longer life.   Available Sizes As per customer’s requirement Available Grades ETP, OFC, Phosphorised Copper Plating / Coating Bare Additional Specifications / Details Available in all forms i.e. Oval, Slabs, Balls, Rods, Nuggets, etc. Applications / Uses Printed circuit boards, Rotogravure, Electroforming, etc. Overall, there are several characteristics that determine the quality of the copper anodes manufacturing process. These include: purity of copper, fine grain structure, uniform phosphorus content and distribution, and properly cleaned and anodes packaged and ready for use. Therefore, the quality of copper anodes should be very important to electroplaters because properly manufactured anodes will: extend bath life; have less metallic contamination; produce parts without roughness; have less sludge; and require less maintenance.  

• Material: MS / GI / HDGI
• Shape: Round or Octagonal
• Height: 3 Mtr to 16 Mtr
• Dia: 76.10 Mm Od to 219.10 Mm Od
• Finish: red Oxide, Silver Painted or as per Your Requirement
• Fetatures: Durable, Long Life, Anti Rust
• Indian Standard: 2713 Pole, 1239 & 1161 for Rm

• Country of Origin: India
• Number Of Flower: Zinc Anodes
• Certification: ISO certified
• Form: Solid
• Shape: Rectangular
• Electrode Type: Anode
• Finishing: Unpolished

• Material: Brass
• Application: Pipe Fittings
• Packaging Type: Golden
• Packing type: Packed in Corrugated Box
• Size: Multisize
• Surface Finishing: Polished

Mild Steel Welding Rods, SS Plate, SS Pipe, SS Sheet, SS Patta, SS Patt

Copper Cathode, Salt, Limestone, Fresh Apples, Guar Gum, Sesam