GMP Technical Solutions Pvt. Ltd. Ghatkopar, Mumbai, Maharashtra

Pre-Painted GI monoblock / modular solid partitioning walls are fabricated by way of nominal 2×0.60 mm pre-coated GI sheets.   These sheets are bonded with an infill of PUF and Rockwool, forming a rigid 50/80/100 mm thick panel to modular width of 1000 mm and 3000 mm in height. Pre-Painted GI modular walls and ceilings are suitable for makeing clean rooms for various industries like; electronics,food, healthcare, packaging, cosmetics etc.

Advantage of being able to incorporate flush light, air conditioning fittings and other ceiling mounted fittings Self supporting ceiling ( without taking support from superstructure ) Each roof panel is designed to withstand concentrated load of 150 Kg ( corresponds to 2 person)Full detail is available on request

Clean Room Door is manufactured from galvanized/stainless steel sheets with lock formed edges.Insulated and bonded with honeycomb paper/aluminium core, mineral wool or polyurethanefoam forming a rigid flush fittings with innovative flush double glazed finished in pure/epoxy polyester powder coating of 70-90 microns forming a smooth surface finish.

Number Of Flower : Aluminum Window

gmp has developed the hpl clean room walls/systems for use in areas where highly clean conditions need to be maintained based on iso and gmp standards.   hpl panel advantages very good resistance to all major cleaning agents available in different colors high resistance to scratches class a fire certification easy to work for flush installation of accessories and for modification during erection solid, 4mm panel; no need of supporting skin structure; in case of scratch or wall chipping, no        low class material exposed to the environment consistency with the use of hpl 4mm for integration with door and coving profiles used in other areas good mechanical stability

  GMP has developed the GRP Clean Room walls/systems for use in high purity classes of high degree clean room requirements based on ISO and GMP Standard.The partition material is molded composite of strong chopped glass fiber mats & fire retardants “Unsaturated isopthalic polyester resin” complying to IS6746:1994. The resultant is a strong composite having good mechanical & chemical properties.   A complete range of partitions walls and ceiling systems are available to meet the technical specifications of controlled environment rooms. Ceiling as well as partitions are inert. non particle-shredded, forming part of clean room aseptic envelope to enable compliance with FDA validation procedures and GMP standards. Full details of the complementary range of ceiling systems are available on request. Advantages of GRP Monolithic, non-shredded & Strong Chemical & Scratch Resistance Durable Does not require insulation which reducesthe contamination in case physical damages to the partition Smooth & Seamless, easy to clean Built in color, available with antibacterial protection Water resistant, will not warp, swell, rust or rot

Available in fire resistant levels from 30 minutes up to 2 hours all tested to BS 476 Part 20 & 22, IS3614 (Part 2), these doors are approved by CBRI (Roorkee), Warringtonfire (UK) and UL (USA). These doorsets can be made in very large sizes with options for glazing, fire resistant self closing louvers, single or double doorsets, optional fixed overpanels and optional temperature rise (insulation) configurations.   Certifications 2 Hrs. Fire Rated Metal Doors all tested to BS 476 Part 20 & 22 and IS:3614, (Part 2)Approved by CBRI (Roorkee), Warrington Fire (UK) & UL(USA) 10B & 10C Door LeafShutter sheet thickness is 1.0 mmInfill material is Rock Wool (45 kg /cu.m) Door FrameFrame sheet thickness is 1.5mm. Finish These Doors are Pure Polyester Powder Coated (Jotun Make) 70-90 Micron thicknessThese Door includes standard size Vision panel of 6 mm thick Fire Rated Glass(Fire Rated Wired Glass, Pilkington UK) with Double Skin Shutter of 44 mm thick (GI sheet on both sides). They also include provision for fixing Panic Bar, SS D-Type or Lever Handle with Lock, SS Push Plate, SS Flush Bolt, SS Ball Bearing Hinges, Door Closers, & Anchor fasteners with Cap etc. IronmongeryThe Complete Ironmongery is from DORMA , STANLAY, DOYEN, or of any other compatible makes.

GMP can provide you LAB Furniture to meet your needs which is in Metal, Stainless Steel, Wood and Laminate and is of high quality and long lasting It is attractive and flexible to match your requirements & can configure as per customer requirements. We even design, build, and install whole labs that you can use now, reconfigure later, and move with you. Through our regular contact with our customers, we keep up to date with innovative ideas. We are always looking to address your needs and set market trends.We help at every stage: Design, Planning, Installation and Maintenance. We have capability to undertake any size of project for Laboratory. We provide following products:Fume hoodAnti -Vibration TableIs-Land TableInstrument Lab TableWorking TableSink TableDocumentation Room FurniturePartitionsPass BoxLaminar Air FlowLab StoolsLab ChairsFile CabinetChemical Storage

GMP Building Management Systems provide Control and Monitoring of a range of environmental parameters like temperature, relative humidity, pressure differentials & air borne particle count. These solutions are modular and scalable and can be used for a single room to plant wide applications. They are ideal for, Implementing new systemEnhancing existing system It offers the options for, Centralised BMSNetwork of local stand alone BMS unitsCombination of centralised and local systems to increase availability and ease of use

  An Addressable Fire Alarm System is the modern fire alarm solution to fit your application. This innovative system provides the advantage of analog technology offering speed of detection and identification of the location of a fire to enable quick and timely action. This system also offers tolerance to faults in the system wiring, allowing cost savings in the wiring. It allows easy maintenance of the system and minimizes down time. For large installations, an Addressable Fire Alarm System is the most cost effective fire safety system. In comparison with conventional systems, it has proven to be economical for small installations too.

Fire suppression systems are designed to automatically detect and extinguish a fire. Advancements in technology have brought varied changes in the way fire is fought these days. It has been understood that water alone is not a sufficient mode of fighting or suppressing a fire that threatens to engulf a facility. When it comes to fire safety planning, businesses and establishments have to consciously take into account the revenue loss brought upon by inadequate systems. Therefore, installing a fire fighting and fire suppression system to deal with the eventuality of fire cannot be overlooked

The VESDA (Very Early Smoke Detection Apparatus) air sampling fire detection system detects the invisible by-products of materials as they degrade during the pre-combustion stages of an incipient fire. And, by actively and continuously sampling air, the system operates independently of air movements. In operation air samples are continuously drawn from the monitored environment, typically through a sampling pipe network with the aid of a high efficiency aspirator. On the way to the fire detector the air samples pass through a filter assembly to screen out large airborne dust particles. Once inside the air sampling detector the samples are exposed to a high-intensity and broad-spectrum light source. The incident light scattered from smoke particles in the air sample passes through a series of optical components to a solid state light receiver. 

We customize the Public Address System for announcements and emergency voice evacuation as per the requirement of the installation. The system comprise of head end equipment, distribution equipment and reception equipment. One of these key elements of the Public Address System design is to provide Digital Signal Processors (DSP). DSP multi-effect devices offer a huge range of sound processing options (reverb, delay, echo, compression, etc.) in a single unit. The public address system comprises equipment of sufficient capacity to ensure distribution of voice to various areas of the building with equal clarity. Public address components are provided with graduated priority. The system is integrated with the Fire Alarm System through necessary interfaces. Each floor constitutes a zone with selective floor-wise isolation facility.

Biometrics is the science of measuring and compiling distinguishing physical features for the purpose of security. Biometric security systems use finger recognition, fingerprint authentication, hand and palm print recognition, hand or finger geometry, face recognition, iris or retinal pattern, voice recognition, vein pattern, handwriting, biometric identification, biometric verification, biometric sensors and readers. Biometric authentication is a friendly and safe security solution.

CCTV camera systems are the most commonly used equipments in security today. It is impossible to have human intervention everywhere and at all times. In such cases, the CCTV system offers numerous benefits to commercial, office as well as industrial establishments. CCTV cameras are economical and come with a variety of features. Black & white cameras are the most common and least expensive. They have a better sensitivity to light as well. Advancing technology has ensured that colour cameras, which display more “true to life” images, are becoming cost effective as well as popular. The level of security you need will help you determine which kind of camera is right for you.

Rodent Repellers are high frequency signal generators. These signals are fed to the transducers which in turn convert them into high frequency sound waves (well above the 20 Khz frequency which is the upper limit of the hearing range of humans). The transducers emit intensive sound waves at high decibels (sound pressure) that are audible and painful to rodents but are inaudible and harmless to humans. The rodents usually leave the area being protected by the ultrasound waves immediately and at other times it may take as long as 4 to 6 weeks before there is significant reduction in rodent infestation. They do not get killed. The transducers are quiet. If you cannot hear them, do not think that the unit is not working. You cannot hear ultrasound. The powerful sound waves generated by the transducers of the repellers are within the hearing range of many pests, and cause them pain and discomfort. Sometimes, the pests will leave the area being protected immediately, and at times it will take as long as four to six weeks before there is a significant reduction in infestation. Rodents stop entering the areas being protected by Ultrasonic Pest Repeller, because the ultrasonic sound waves hit their eardrums and cause them considerable pain and discomfort. They do not get immune since the sound output is at varying frequencies. They do not die unless they get trapped in a particular place for days together or are under consistent exposure to ultrasonic sound.

Water leak detection has become high up on the list of priorities for many companies and Industries. The water leak detector cable itself is the sensor. Every centimetre of rugged, fire rated cable is sensitive to water and when water comes into contact with the cable, even a few millilitres, the system is able to detect the leak AND report the location. The detection cable can be installed in any length from a few metres in a drip tray to hundreds of metres around the perimeter of an office area. Typical applications in office buildings include the monitoring of fan-coil units around the edge of the building office floors, detectors surrounding the central utility core on each floor of the building and dedicated monitoring of leaks in electrical switch gear rooms, server rooms, network communications, etc.

Video analytics is the practice of using computers to automatically identify things of interest without an operator having to view the video. The most commonly used types of video analytics professionally deployed are perimeter violation, license plate recognition and people counting. GMP caters to this need by providing integrated software for Video Analytics and CCTV surveillance Systems.

World energy consumption has risen 45% since 1980 and it is projected to be 70% higher by 2030! At the heart of our strategy is a simple and powerful idea: Using natural resources much more productively and efficiently which is both profitable and better for the environment. We can all adapt to the new energy world!We provide integrated solutions for the residential market, buildings, Industry & Infrastructure, and data centres. Now, you can build a long-lasting energy strategy for a growing performance, while preserving the environment. Save more than the planet. Make the most of your Energy.Although everyone can help the planet by turning off the lights or turning down the heat, this represents only a small fraction of CO2 emission. Industry and building, on the other hand, account for more than half of energy consumption today. Energy Efficiency is the quickest, cheapest and cleanest way to reduce energy consumption and achieve greenhouse gas emission to meet Kyoto targets. Ambitious Energy Efficiency actions are feasible now. In most of the existing installations, you can target up to 30% energy savings using the existing offer and technologies.

  GMP provides Modular Operation Theaters as per HTM 2025 Standard,which includes: HVAC SystemsHospital Equipment & FurnitureNurse Call SystemsGas SystemsLV Critical Electrical SystemEpoxy FlooringIT & Networking Systems

Technical feasibility & Conceptual Studies Basic & Detailed drawings of complete facilities for Formulations, API, Sterile applications, Biotech, Medical Devices, Toxic & Potent products (Cytotoxic, Hormone etc.) Process Development Scale Up Process Simulation Process Optimisation

We offer innovative IT solutions tailored to your needs. Drawing on expertise from thousands of engagements across a range of industries, we can help you build a resilient infrastructure optimized for your business. As one of the pioneers of this business, GMP continues to offer best of breed, international standard compliant solutions from worldwide recognized top rated manufacturers. Latest and most advanced cabling technologies such as UTP CAT6e, 10Gb Copper & Fiber etc. are available for our clients. GMP continues to enjoy best reputation for quality of installation, value and technical support services in this category of technology. Structured Cabling GMP Technical Solutions provide structured cabling systems and structured cabling services throughout the country. We have an enviable industry wide reputation of providing the highest level of Quality and Service. Switching / Routing We offer a single-point solution with support for a wide range of networking devices including routers, switches, firewalls, hubs, and modems from the leading network equipment manufacturers. Wireless Communications GMP delivers an integrated end-to-end wireless solution that addresses all layers of the WLAN, from client devices and access points, to the network infrastructure. Solutions that offer the same level of security, scalability, reliability, ease of deployment, and management that organizations have come to expect from their wired LAN’s storage. We provide high-performance storage solutions to meet your business and IT goals

Understand GMP is known for designing and integrating solutions for the boardroom and meeting room space with audio visual equipment, multimedia and control systems. We understand the needs of both the users and the organisation. We work with you to grasp the key requirements of the meeting space and the role that the audio visual technology needs to play. Design Our Project Engineer creates a solution that integrates leading edge audio visual technologies. Our expertise in room design and customised control systems ensures the successful integration of voice, video and data presentation technologies.The design brief focuses on producing both user-friendly and reliable solutions. Build Skilled technicians construct the audio visual solution to the highest possible standards. Our significant experience in the installation of audio visual technology provides us with the ability to work comfortably with architects, design consultants and electrical contractors through to completion. Support Throughout the life of the system, our support team monitors and maintains the installation to guarantee a consistent and reliable user experience. Review Every six months your account manager will sit down with you to review both the systems performance and the changing needs of the organization. GMP’s Audio/Visual Integration We are committed to providing peace of mind to their clients regarding accurate product choice, design, development and installation of audio visual equipment. We strive to ensure that your investment in audio visual equipment will be of the highest standard. We provide systems for the following:

Key Telephone System A key telephone system enables a user to use DSS keys for accessing Stations or trunk keys by simply pushing a button or “key” on a telephone. The KTS phone is multi-functional, user friendly and multi-key instrument. Hold and intercom buttons are typically used to place a call on hold so that the call can be “announced” over the intercom line before being distributed to the person for whom the call is intended. Most business key telephone systems are “squared,” which means that every telephone has the same number of buttons or line appearances. This concept works especially well in small offices, where anyone can retrieve any CO line from any telephone in the system. Key telephone systems also simplify how users can establish conference calls, since all active lines appear on all telephones. The KTS systems with applications can cater to various segments as follows: Hotels with Basic Hotel Motel features Domestic call centers with ACD MIS Residential Users SOHO like travel agencies Financial segments with dealing room and logging solutions.

Consulting Our Data center Consulting Services is an enterprise-wide, consultative approach to help you manage mission critical environments. The services encompass the entire lifecycle, from assessment , strategy and design, to implementation and operational services. Design We have the expertise, proven methodologies and tools to help you manage your data center investments , improve operations and performance, and deliver business results. GMP provides cost effective Project Management service which can be tailored to specific projects and situations. Our complete project management service spans estimating and planning, contract negotiation, Project Management procurement , site management and construction supervision, commissioning and validation management. Alternatively, we may assist clients in the technical and commercial control and management of main contractors. We are especially experiences in the project management of ‘fast track’ projects. Control /Monitoring Data Center monitoring and control is a critical element of maintaining maximum availability for your critical operations. Our criteria for both support infrastructure systems monitoring and informat ion technology inf rast ructure monitoring is the same. We believe it vital that monitoring and control systems be cost effective, quickly deployed and implemented, easy to use, utilize intuitive alarming and escalation methodologies and provide robust reporting all from a central, secure, location. Mission critical services require sophisticated monitoring.

Gmp consists a team of experienced and qualified calibration and validation specialists in the field of pharmaceuticals, api factory, clinical-research, r&d, quality control laboratories, hospitals etc. Cleanroom validation with accurate documentation of paramount importance. A well-conceived properly administered maintenance program can be measured by regular testing of the facility by our technicians. A program of periodic inspection can be established on a quarterly, half yearly or annual basis. Once a program has been initiated, the schedules of onsite testing will be accomplished automatically. We execute the cleanroom validation requirements. Equipment and process validation is done by keeping in mind about the critical requirements of various regulatory authorities and latest gmp, glp requirements in the industry. Now international standard impactor mensuration service now available in india with minimum turnaround time. Gmp has a state-of-the-art instruments and facility for calibration of cascade impactor. At gmp we have vision measuring machine for mensuration of cascade impactor. We also undertake onsite calibration jobs for a wide range of electrical & mechanical quantity measuring devices like, pressure and temperature instruments.