Fire Alarm System Dealers in Mumbai

The Ultima Controller is purpose-designed and built to provide complete access to all advanced features of the Ultima and Ultima X Gas Monitors, as well as the Toxgard II Gas Monitor. Via its full-function and password-protected keypad, users can set the real time clock, set alarm levels, change span-gas values, display date of last calibration, display minimum, maximum and average gas values, change address and set future calibration time/date in addition to providing basic calibration functions   Multi-Spectrum IR (MSIR) sensor array provides increased range and a wide field of view Neural Network Technology (NNT) combination is highly immune to false alarms caused by lightning, arc-welding, hot objects, and other sources of radiation. Continuous Optical Path Monitoring (COPM) checks the optical path integrity and the detector's electronic circuitry Designed to detect typical fires such as those produced by alcohol, n-heptane, gasoline, jet fuels and hydrocarbons, the FlameGard 5 MSIR Detector can see through dense smoke produced by diesel, rubber, plastics, lube oil, and crude oil fires. The FlameGard 5 MSIR Detector is housed in a stainless steel explosion-proof enclosure to provide operational integrity in the harshest environments. Multiple communication outputs provide versatility for use in a variety of applications The serial communication port(s) allows 128 units (247 using repeaters) to be linked up to a host computer using the Modbus RTU protocol.

The fire alarm system detects and notifies early signs of fire even before it starts, which helps you reduce risk of injury or death to employees and visitors as well as minimize damage to your property and operational disruption. Over 24 x 7 monitoring service makes you feel safe and secure.Components of fire alaram systems Main Control Panel : It is central part of the system. All detectors are connected to panel via wired loops. If any detector fails, it gives an open or short signal on the panel. Generally two types of panel are available - i) a 2 zone panel or a ii) 4 zone panel Smoke Detector : Smoke detectors are manufactured according to UL268 standards; it senses the presence of smoke and warns you before the fire start, by generating an alarm through hooter. Heat Detector : Heat detectors are manufactured to sense “Rate Of Rise” in heat against the “fixed temperature” and generates an alarm. Manual Call Point : This is manual alarm, placed ideally at entrance/ exit points. One can break the glass cover of the manual call point and an alarm is generated. Response Indicator : This device gives remote indications of alarm going off, in case of detectors placed in non-visible area. Hooter : This device is activated and siren is generated when a detector goes into alarm condition.   Details : Main panel Hooter Response indicator/Emergency switch Heat detector Manual call pointer Smoke detector

A Fire Alarm System is installed in the premises for providing security against the unwanted situations related to fire. Fire Alarm System easily detects smoke or fire and makes a loud noise and sometimes throws a shower of water so as to reduce the risk of spreading fire. Our variety of Fire Alarm System includes smoke detectors, fire extinguishers, conventional & addressable system, and gas sensor.

Godrej Security Solutions also has a range of detectors and devices, to suit all needs. From heat detection, to smoke detection, to multi-criteria detection, our devices have all your fire safety needs covered. To top it off, all our devices are loop powered, negating the need for an external power supply.

We are recognized as one of the dependable Wireless Fire Alarm System Suppliers in India. The Industrial Fire Alarm System offered by us is widely demanded in the market due to its efficiency and reliability. We sourced the Commercial Fire Alarm System from the well-reputed vendors ensuring availability of no alternative in terms of quality and performance. Moreover, the Fire Alarm Systems offered by us comply with the international quality standards and their salient features are as mentioned below: Salient Features It consists of a smoke detector manual call point and an Electronic Hooter.It is placed in the lift, stairway and lobby of every floor.The smoke detector call point and hooters are connected to the Main Control Panel on the ground floor, which is watched by the security people.In the event of fire, the glass of the manual call point is broken.Thus the Hooter on that floor will be activated and in turn, the main control panel will give a flashing LED display and sound an audible alarm.This is statutory requirement for obtaining N.O.C. from the Fire Brigade.

top advantages of wireless fire alarm systems easy & versatile installation because you no longer need to attach it to a power source, we can easily install your wireless fire alarm system anywhere you need & want it to be. we can place it in key areas that have a high risk of catching fires and do so without considering if they’re near enough a power source. uninterrupted protection & safety since they don’t need to depend on external power sources, relying on their built-in batteries instead, you no longer have to worry about potential fires during power outages. this is because the wireless fire alarm system we at ex-buzz have to offer can still detect fires, even during an outage. easy maintenance another benefit of going wireless is that your fire alarm system can now be easily maintained. with traditional wired systems, you have to pay close attention to wires & other electrical components, so as not to risk being electrocuted. with wireless, you can easily detach & maintain your fire alarm system without the risk of fires. convenient updates & expansion wireless fire alarm systems also offer benefit of convenient updates & expansion, allowing you to keep your system up-to-date & running smoothly as possible. expanding your fire alarm system has also been made easy with wireless systems as you only need to add additional components & connect it to the existing network. cost-efficient yet effective safety measure another benefit of going wireless is the cost-efficiency & high level of effectiveness it offers. wireless fire alarm systems are more cost-efficient in all aspects – from installation to repairs, & it doesn’t sacrifice its effectiveness to be cost-efficient. reduced downtime in case of repairs wireless fire alarm systems reduce the downtime needed for your system as you don’t have to take down the entire system just to fix one aspect of it. as such, it offers you enhanced protection & assures your continued safety.

A heat detector is a fire alarm device designed to respond when the convected thermal energy of a fire increases the temperature of a heat sensitive element. The thermal mass and conductivity of the element regulate the rate flow of heat into the element. All heat detectors have this thermal lag.

Fire Detection System in India or Fire Alarm Systems (FAS) are an early warning system for industrial or residential complexes. A Fire Alarm System is a passive system, meaning it does not stop the fire from spreading. It means that the Fire Alarm System does not actively fight the fire. The main function of a Fire Alarm System is to give an early warning, that the fire has taken place in the factory or residential complex. This means that, the people in proximity to that area have an early warning to evacuate the building. However the fire will continue to burn, unless if an active system like Fire Hydrant System or Fire Sprinkler System is engaged. The second function of the Fire Alarm System is to, alert the responsible authorities. Here the authorities may be the local Fire Department or the Emergency Action team. The third function is to support the Fire Brigade, when they enter the building on fire. A Fire Alarm System also provides necessary emergency lighting, so that the Fire Team can navigate through the smoke and the dust. There are two types of Fire Alarm Systems, based on the detection of location of fire : Addressable Fire Alarm Systems Non- Addressable Fire Alarm Systems Addressable Fire Alarm Systems :Addressable Fire Alarm Systems are also called Smart Fire Alarm Systems. This is because along with detection of fire they provide the location of the fire. As and when the fire spreads the FAS, alert accordingly. In addition they may provide an array of other specific services. Up to 250 devices may be connected, to the main control panel of the Fire Alarm System. Fire Alarm Companies in India, have made great strides to make the system more effective and user friendly.

This test unit has been designed to generate a wide range of optical output signals. Flame sensors for fire detection and flame monitoring applications can be activated and tested.Most optical flame sensors respond to Ultra Violet (UV) and or InfraRed (IR) radiation emitted from flames during combustion. Many sensors also use flame flicker techniques to distinguish between flames and other optical false sources.The test unit simulates the flickering flame signal by modulating the output of a filament lamp. The thermal time constant of a filament lamp prevents the generation of a perfect flame flicker signal. The slow response of the filament lamp will mean that some flame sensors many require more time to activate under test than they would with a real flame.

Public Address System is an essential part of the Fire Alarm System, when the system being installed in big area like high rise building, factories, hotel, computer center, laboratories etc. The basic function of Public Address (PA) System in Fire Alarm Control Panel is to make a special announcement in case of Fire in effected areas or nearby wherever PA Hooters been installed.

We offer our clients our qualitative range of fire alarm systems that is manufactured by certified companies. These fire alarm systems work on 230v supply and have provision for battery backup. The equipment provides relay output for interfacing with security panel, auto-dialer, audio alarm via siren or buzzer and have zone-wise visual indications for open, short, test or bypass conditions.

Quality control during printing or finishing has to be simple and must be very reliable. At the end, your reputation depends on the work you deliver to your customers. The concept of TubeScan sets a new standard with the smart combination of imaging technology and the stroboscopic principle. TubeScan provides considerably higher process reliability with the base function digital strobe because it always delivers a steady image and true colour representation – independent from the machine speed. The function digital strobe+ is not only accurately counting repeats, labels and missing labels in total and per lane, but it also detects matrix residues across the entire web width. By choosing the additional option digital strobe++ TubeScan even becomes a full grown print inspection system, which is able to detect print defects and register variations below one millimeter.   Features      Min. defect size: Approx. 0.2 mm  Detection of fine print defects, register defects & color variations  Web width: up to 660 mm (26")  Camera Resolution: 1280 pixels area scan camera with an X Direction  Substrates: Suitable for transparent and opaque materials  Max web speed: 250 mtrs. / min.  Accurate counting of repeats, labels and missing labels for up to 20 lanes

The residential fire alarm manufactured by us has been termed as best available in market by our clients. We are offering a wide range of fire alarms, which includes cybercat intelligent fire alarm system, shp pro conventional fire alarm system, video fire detection, smoke control, and addressable fire alarm. We have designed them with the help of advance technology as per the specific demands of different sectors. These fire alarms system helpful in turning every device in to a peer that not only communicates up-to-the-second information to the control panel, but that also communicate with each other - and are capable of generating accurate and highly detailed information. These fire alarm systems are cost-effective and adaptable to a variety of applications, big or small. The immediate functioning provides turnkey video, flame, smoke, and intrusion detection solution. These fire alarms allow manual override of remote air handling equipment (air handlers, dampers, pressurization fans, etc.) and indicate the current status of this equipment – with no need for a separate smoke control system. These fire alarms are more advanced and sophisticated, than the conventional fire alarm panels that the older fire alarm systems utilize. The precise detection of fire and combustion activities by our digital fire alarm has helped us to maintain leading position among the fire alarm manufacturers and suppliers from mumbai. features : precise detection of combustion activitiesinnovative range of productsloud and clear signal after detection of firesmall size and neat design widely used in : official buildingsresidential buildinglifts and elevatorsparking placesgo-downs and warehousesfire sprinklersprinkler pre-action deluge