Fire Alarm System Dealers in Hyderabad

We offer to our client highly effectual Addressable Fire Alarm System. The Addressable Fire Alarm System offer tolerance to faults in the system wiring. This allows a single pair of wires to be used for connecting a large number of devices to the system, allowing cost savings in the wiring of large systems.

A fire alarm system is a set of electric/electronic devices/equipment working together to detect and alert people through visual and audio appliances when smoke/fire is present. These alarms may be activated from smoke detectors, heat detectors, water flow sensors, which are automatic or from a manual fire alarm pull station.

We are the foremost Supplier of the best quality Fire Alarm System, based in Hyderabad. Fire Alarm System, offered by us, is procured from the trustworthy vendors of the market. Our quality auditors perform various tests on Fire Alarm System in order to ensure the quality and high performance. Besides, we have a wide distribution team to handle the bulk orders of Fire Alarm System. Highlights : Innovative design Excellent performance Durable Best quality

We are expertise in both analog and addressable Fire alarm system with integrations of all conversant makes. A fire alarm system has a number of devices working together to detect and warn people through visual and audio appliances when smoke, fire, carbon monoxide or other emergencies are present. These alarms may be activated automatically from smoke detectors, and heat detectors or may also be activated via manual fire alarm activation devices such as manual call points or pull stations. Alarms can be either motorized bells or wall mountable sounders or horns. MAKES: Notifier, EST, GST, Ravel, Hochiki, Simplex, Apollo, Morley, FireLite, Secutron, Mircom & Cooper.

In a Conventional Fire Alarm System, a number of call points and detectors are wired to the Fire Alarm Control Panel in Zones. A Zone is a circuit and typically one would wire a circuit per floor or fire compartment. The Fire Alarm Control Panel has a number of Zone Lamps. The reason for having Zones is to give a rough idea as to where a fire has occurred. This is important for the fire brigade and of course for the building management.

An automatic fire alarm system is designed to detect the unwanted presence of fire by monitoring environmental changes associated with combustion. In general, a fire alarm system is classified as either automatically actuated, manually actuated, or both. Automatic fire alarm systems are intended to notify the building occupants to evacuate in the event of a fire or other emergency, report the event to an off-premises location in order to summon emergency services, and to prepare the structure and associated systems to control the spread of fire and smoke.

The Fire Alarm System, provided by us, is manufactured using advanced technology. We have with us a well-maintained and capacious storage unit that is facilitated by advanced and automated warehousing system, which is operated and supervised by experts only. Ours is a well-established firm, located in Vijayawada(India) and associated with leading names to fulfill varied demands of the buyers.

Avail from Us Well Designed fire Alarm System, Which is the Perfect Combination of the State of Art Security Electronics and Reliable Alarm to Make Sure that the Premise is Safe and Secure. These Fire Alarm Systems are Best for Providing Safety Against Burglars. the Fire Alarm System is Available At Reasonable Prices. attributes easy Accessround the Clock Emergency Servicesrobustly Built Alarm Systemlong Working Life

We have a team of professionals who keep their vigil eyes on the entire lot that is stored in the warehouse. This unit keeps the lot free from the factors like duct, rain, sunlight, etc. Recognized amongst the famed names in the market, we are capable of delivering quality Fire Telephone System to the customers.

Manual Call points are systems or devices which are used by individuals to raise a fire alarm when there is an emergency or a fire accident. Notifying generally happens by pressing a button or breaking any element of the Manual Call Points. These are widely used in commercial places/offices/malls where there is a heavy movement of individuals.

ADAPT, Addressable Multi-sensing detector, Low-Profile Photoelectric Smoke Detector and Thermal, Capable of Heat-Only alarm mode. Clip Mode Only; includes B350LP base

Sensing & detection of fire in a protected area prior to any physical recognition is the core feature of an Fire Detection & Alarm System.It involves a step by step recognition process that involves detection of fire, coveying of signal to a centrally located area and activation of alarm.   1) Intelligent System Intellegent fire detection systems are smart fire detection systems that use modern technology to communicate information on fire threats. An intellegent fire detection and alarm system can pin point the exact location of fire, can base its detection as per the requirement of the given situation, it can engage in continuous monitoring process, it can maintain an archive of events by means of adequate data storage and above all it can facilitate conversion of information into graphical interface. 2) Conventional SystemsConventional systems are traditional systems used for the purpose of fire detection. Conventional systems are traditional systems used for the purpose of fire detection these are zone based and are not addressable Detection systems. Data storing in conventional systems is generally not possible, hence they are treated as non hi-tech systems. However conventional systems are dependable and are very spontaneous in most situations.

Security is primary concern for everyone. There are many ways to provide security at homes or in industries. The main aim of this project is to continuously monitor the house or industries and if any fire accidents occur, the system should alert the siren and also inform immediately to the person concerned by using wireless communication system GSM. This system totally eliminates a person who has to monitor the house or industry all the time. A GSM modem provides the communication interface. It transports device protocols transparently over the network through a serial interface. A GSM modem is a wireless modem that works with a GSM wireless network. This GSM Modem can accept any GSM network operator SIM card and act just like a mobile phone with its own unique phone number. Advantage of using this modem will be that you can use its RS232 port to communicate and develop embedded applications. Applications like SMS Control, data transfer, remote control and logging can be developed easily. The modem can either be connected to PC serial port directly or to any microcontroller. This project is designed in such a way that a GSM modem will be interfaced to the controller using serial communication along with a fire sensor .This control unit will be fixed in the house or in an industry. A buzzer is also interfaced to the microcontroller for an audio identification. The micro controller continuously monitors the status the sensor. Whenever the status of the sensor changes, microcontroller detects this and sends a predefined message to the modem. The modem sends the same message to the user mobile number and the user can take the necessary action immediately. The siren will be alerted simultaneously. A 16X2 LCD will be interfaced to the controller to display the status of the sensor. This project uses regulated 5V, 500mA power supply. 7805 three terminal voltage regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac output of secondary of 230/12V step down transformer.   Micro Controller : AT89S52 Crystal : 11.0592 MHz Lcd : HD44780 Gsm Modem Max232 Fire Sensor Software Requirements Keil Proteus Uc Flash Embedded C Prog Isp

Useful in residential as well as manufacturing plants, our Fire Alarm System is widely in demand. Our Fire Alarm System is designed as per the latest technique and is highly efficient in sensing fire. It immediately indicates about fire with a loud noise. Fire Alarm System, offered by us, is available in different shapes, sizes and designs so as to meet the requirements of the clients.

We are offering an automatic fire alarm system is designed to detect the unwanted presence of fire by monitoring environmental changes associated with combustion. In general, a fire alarm system is either classified as automatically actuated, manually actuated, or both.

Fire alarm system: the fire alarm control panel (facp) shall be the central processing unit of the system, receiving and analyzing signals from fire sensors, providing audible and visual information to the user, initiating automatic alarm response sequences and providing the means by which the user interacts with the system. The system is categorized as addressable and conventional systems. 1)addressable fire alarm system provides exact location and information of activated sensor. 2)conventional fire alarm system provides zones vise information of activated sensors.

Heat Detector, Wireless Phones, Biometric Reader, Fire Smoke Detecto

Heat Detectors, Metal Bell, Sprinkler Systems, Smoke Detector