HDPE Pipe Dealers in Mumbai

HDPE Pipe is a primary alternative to PVC (Poly Vinyl Chloride) pipe for all piping applications and is rapidly gaining market share for potable water, sewer, conduit and ducting, DWV (Drain, Waste and Vent) agriculture, and ground drainage uses. Used Since the 1950's, HDPE has demonstrated its effectiveness through its durability, leak-free performance, corrosion resistance and ductility. HDPE pipes are durable, leak-free, corrosion resistant, and ductile. Its greater resilience and flexibility makes it less susceptible than PVC to surges, damage from digging, and shifting soils during earthquakes. HDPE is also preferable to PVC as it is chlorine-less, requires fewer additives in its manufacture and has a much higher recycling rate than PVC. Tulsi HDPE OD Pipes are available from 20mm to 315mm in PE 63, PE80, PE 100range in PN 2.5,4,6,8,10,12.5 and 16 kgcm2 pressure and Tulsi HDPE ID pipes are available in 2” to 3” with Silicon coated & without coated or as per customer demand.

We offer a wide range of grades for diverse applications across sectors such as packaging, agriculture, automotive, housing, healthcare, water and gas transportation, and consumer durables. Products are also exported to more than 60 countries. Driving our growth is the Polymer Research and Technology Centre (PRTC), which addresses the diverse needs of our customers and facilitates value-added performance.

We are backed by a reliable team of packaging professionals and modern facility that aid us completely for furnishing standard as well as tailored packaging requirements of the patrons. Our payment procedure is not only easy to operate but also guarantee secure transactions. In addition to this, it is featured with multiple options like cash payment, bank account transfer and more.

Keeping track with latest market development, we are devotedly engaged in offering wide assortment of HDPE Tube. This tube is a high density tube which is less flexible but has better physical and chemical properties, and withstands sterilization by boiling. It is widely used in transporting air, water and chemicals. We offer this product in variegated options, in order to fulfil ever-evolving requirements of our valuable clients, across the markets. Our product is praised for its various quality features. Features : Economical, high value pipe Superior design life and hydraulic capacity Features the rolled rim bell Fast bell-and-spigot joint assembly with proven structural integrity Rugged dependability Lightweight

We are one of the most sought after Manufacturers and Suppliers of HDPE Pipes in Indian subcontinent. We have installed a physical framework for customizing them in standard as well as tailored specifications. Further, our HDPE Pipes always stand tall on the grounds of quality and performance. With our smart logistics network, we are capable to deliver even bulk orders, as and when requested by the buyers.

We manufacture HDPE pipes from 20 mm to 450 mm. in all pressure classes in PE 63 , PE 80 and PE 100 grades as per various international standards like IS : 4984, IS : 14333, ISO 4427 and DIN 8074. These pipes are manufactured from high grade HDPE polymers. We are having the state of art fully automated machines to manufacture the “POLYSIL” HDPE Pipes and Coils. All our HDPE Coils are properly stripped and packed in woven sack fabric for extra safety. HDPE Fabricated Fittings We are making the “POLYSIL” High Quality Fabricated fitting Like Tee, Bend 90 Deg., Bend 45 deg., Reducers & Flange Ends for all our range of HDPE pipes. Salient Features High corrosion resistance resulting into a longer life. High impact strength. Extremely light weight and hence easy to handle and install. High flexibility. High abrasion resistance. Excellent water hammer resistance. Good flow characteristics. Absolutely inert to any pH value. Virtually maintenance free. High UV resistant. High Resistance to scaling and biological buildup.Applications Agricultural  Lift/flow irrigation Submersible pump delivery lines Suction and delivery of pumps Multi irrigation systems Domestic Applications Potable water supply Lift irrigation and Farm irrigation schemes Rising main and distribution network for raw/filtered water Chilled water circulation Temporary supply system like construction water lines, drought relief and flood relief Industrial  Liquid and Chemical Transmission in Sugar and Distilleries Transmission of edible oils, fruit pulps juices, milk and brine water making units Transmission of acids, alkalis and all corrosive chemicals Effluent collection and disposal system Corrosive chemicals and effluents Treated radioactive waste Submarine and underwater pipe lines  Effluent marine outfalls Rivers/canals crossing under water Salt water intake lines Hydro transport system Iron ore and tailing slurries Boiler ash handling Coal and cement handling Sand slurry conveyance in stowing in mines and sand slurry disposal in dredging

Product Range Dia 6mm – 1600 mmOutput : 40 Kgs/Hr.- 1500 Kgs/Hr. These production lines are developed by German Technology. It is applicable for high speed extrusion for various polyolefin materials e.g. PE,PP,PB,PERT,ABS etc.Diameters of screw ranges from 20mm to 200mm.  It is mainly applied in the extrusion of polyolefin plastics. Slotted feeder cylinder and novel screw design may remarkably enhance its plasticization.  It has advantages such as high extrusive volume, low melt temperature, wide applicable material range etc. High torque reducing speed installationHigh torque outputHigh hardness and fineness tooth flank gear structureLow noise box design  Oil pump cyclic lubricationOuter-connected cooler forced coolingSpecial feeder inlet designHas perfect water cooling deviceProfessional bushing with ladder grooveCharger with infeed device   Control systemFairly high precision temperature-control deviceSpeed regulative system with stable operationControl components with reliable performancePlasticization controllable which optimizes its plasticization performanceLow melt temperature makes the melt body even.Machine barrel and screw made with introduction of German technology Non-maintenance operation, super-quiet blower cooling cylinderResistance porcelain heater coil, Germany origin design for out lookingControl system is also available with  Microcomputer.

PE Pressure & Non Pressure Structured Wall Pipes up to Ø4000mmKrah AG, the German machine manufacturer, has developed a complete production line to produce pressure pipes in diameters ranging from DN/ID 300mm to DN/ID 4000mm made of a compound of polythelene reinforced with fibres to unite the well-known properties of thermoplastics with the significant characteristics of fibers. The machine is designed similar to the well established KR Series production machines, applying the winding process to produce pressure pipes up to 10 bar working pressure. Moreover it can be upgraded to the characteristics of the conventional KR Machine, so that now one single machine, the so called KDR machine, is able to produce structured wall Non-Pressure Pipe Systems as well as solid wall PE-GFR Pressure Pipe Systems. However, the equipment is not only designed to manufacture the pipes themselves, but it is able to produce an integrated electro fusion joint and the complete range of fittings for pressure as well as non-pressure applications. High production output, enormous flexibility, short setup and change over times, simple operation, a perfect joint and more application facilities for the products are the main characteristics of all Krah machines. Moreover, the customer decides which pipe diameters are needed to satisfy the market requirements and he purchases only the necessary production tools for these pipe diameters. This allows the customer the optimum choice of equipment with the possibility to upgrade the equipment later by purchasing production tools in other diameters. Such an upgrade does not require any modifications to the machine. Furthermore every pressure class can be produced without the necessity to invest in further dies or special tools. Various formulations of high density polyethylene (PE 63, PE 80, PE 100) can be used to produce the requested end product, thus providing all positive characteristics compared to other stiff pipe materials like concrete, steel, etc. The DR Series is designed to produce, in the most economical and ecofriendly way pipes, fittings and manholes in diameters ranging from DN/ID 300mm to DN/ID 4000mm and in lengths from 1m up to 6m and on special request even longer, 6m pipe length has become a standard length because of their easy to transport and handling.

Used in a variety of industrial applications, our range of High Density Polyethylene (HDPE) Pipes is considered as the best option available in the market. Furthermore, our range is light in weight, which makes it easy to install & handle. Our pipes are durable, corrosion resistant and possess high impact strength due to the high grade raw material used to design these.

The HDPE Pipe (PE 63), offered by us, is made using nontoxic material that does not hamper the fluid flowing through it. Our HDPE Pipe (PE 63) is majorly used for construction purposes, for commercial uses and more. Avail the HDPE Pipe (PE 63) from us in different diameters and lengths as per the requirements. Product Features : High Chemical Resistance  Outstanding Low temp Resistance  Low Frictional Losses  Weathering Resistance  Low Specific Weight  Excellent Flexibility  Smooth Internal Surface  Low Thermal Conductivity Applications : Acid Filling Stations Automotive Industry Chemical Industry Cable Ducting Electroplating Plants Galvanizing Plants Gas Transportation Indl. Washing Lines Irrigation Metallurgy Industry Mining Operations Pharmaceuticals Paper Mills Pickling Lines Slurry Transportation Textile Industry Thermal bath Lines Water Industry Water Treatment Range:16mm-1000mm/PN 2.5-20/SDR41-SDR7.4(HDPE/MDPE/LDPE/PE – Extruded/Moulded/Fabricated).    Color: Black/Yellow/Blue/Custom.    Standards:.ISO4427/EN12201/AS/NZ4130/IS4984/IS14333/Custom.   Specifications Black/yellow/blue/custom. Black/Yellow/Blue/Custom.   Additional Information Min. Order Quantity 100 Square Meter Port Nhave Shena Delivery Time 14days

Only premium packaging material has been used for the safe packing of our products which ensures that only defect-free range is delivered at buyer's end. Adequate packaging assures the safe transit and flawless delivery. As a dependable name from Palghar(India), we make available our products to every nook and corner ensuring complete customer satisfaction. Features : Toughness Durable finish Rust-proof Rugged structure Accurate dimensions

HDPE-Lined-Pipe HDPE Lined pipe will have one end lose and other end fixed flange.