Hydraulic Deep Drawing Press Dealers in Mumbai

Tube expansion system, Our New Model Push & Pull K50-600 Pneumatic Rolling Motor has been specifically engineered to ensure uniform tube to tube sheet expansions, thereby preventing the under and over rolling of tubes. This pneumatic tool features an aluminum body, weighing in at only 10.5 lbs (4.76 Kgs) with an ergonomically correct pushpull Throttle. Automatically Stops Tube expansion at defined settings.

Ps. all of the above specifications are approx. and nearest to the actuals. Any other parmenters if required shall be available on demand. Specifications of custom-built deep draw presses are made and available on requirment. Exhaustive job descriptions/detail are required to ascertain the particular model of deep draw press will be required for the purpose.

Specially designed Deep Drawing Press manufactured by our company has received appreciation from the clients based all across the globe. We fabricate Deep Drawing Press from ultrasonically tested quality plates for ensuring efficient performance. The robust structure and long performing life of Deep Drawing Press has made us a prominent name in the market. Special Attributes : Impeccably equipped Advanced hydraulic & electronic (PLC) control Designed for high off center loads with heavy RAM force Require low maintenance Low power consumption Optical safety device Emergency stop button Two hand control station Ideal For : Deep drawing automobile sheet metal components Oil tanks Stainless steel kitchen sinks Mudguards etc.

Molygraph’s Smooth form and Smooth press line of metalforming oils are highly lubricious oils fortified with anti-wear/EP additives for deep drawing applications. The most critical aspect of these oils is the high degree of boundary lubrication achieved by their use.As deep drawing applications typically involve high stresses and loads it becomes imperative to use high quality lubrication to get desired results.The main applications of these oils is in sheet metal drawing. Fuel tanks, automotive door assemblies, cylinder components etc , require the use of forming oils to eliminate cracks and other defects.

The Impact Extrusion Press is used to extrude aluminium collapsible tube drawn from slug after lubrication in single stroke. This machine built for continuous operation over long periods with an absolute minimum of attention and down time. Our Horizontal Extrusion Presses have a carefully designed main frame built for stronger than normal usage demands. The rigid construction reduces deflection to an absolute minimum and even at the higher speed these Presses are stable in operation.   The toggle linkage mechanism gives the rapid approach and steady controlled working stroke demanded by the extrusion process. The cast steel links of the Toggle mechanism incorporate precision machine, knuckles, bearing on to the high quality Phosphorous Bronze seating designed to operate at comparatively low bearing pressures, thus eliminating load and wear on the Connecting Pins.   The system can also be interlocked with the Press control to stop the Press. The Oil pressure deviate from the correct operation range the signal light shows. A mechanical rotary Bowl Feeder selects slugs for delivery to the Press feed Chute. The feeder has an independent motor with a Reduction Gear Box, which is quiet in operation, does not induce Lubrication particles into the atmosphere and can deliver the slugs at a higher rate. The slugs are moved from the feed chute and positioned in the gripper finger over the die by a pusher, spring loaded to prevent incoming slugs being driven into the side of jammed tubes, with a result of damage to the feed. As dual Electro-Mechanical probe system detects Extrusion which is not correctly ejected from the die and will stop the Press instantly. The feed mechanism is mounted on a hinged plate which can be pivoted clear of the tool area to facilitate die changing and feed setting. Adopting the feed mechanism to accept a different type of size of slugs is a simple procedure using the feed change parts, which are available. These can be fitted quickly ensuring a minimum of waste production time. The Press frame, behind the die seating, is designed to accept any of the various types of ejectors or compensators necessary for a particular type of extrusion. A vent is provided in the Press Slide and is fitted with a Pneumatic system to allow pressurized air through the Punch to prevent Collapse caused by the vacuum when stripping thin walled or closed end tubes. The drive shaft of the Press run on Anti-friction Bearings and a Pneumatic Clutch and Break which is fitted on the outer side of the flywheel for any type of maintenance work you should not remove the Clutch and Brake is combined. The drive shaft runs the Crank Shaft which is fitted with a Double Helical Gears. An emergency stop to prevent damage to the Press and ensure operator safety the Press is stopped Automatically if the Clutch air pressure is low, an extrusion does not eject from the die pressure system for the shoulder thickness is mounted on the backside which is adjustable rotate the hand wheel. Then rotate the hand wheel on the top side for fine adjustment of the shoulder thickness and then lock the back side wheel.

We Offer optimum quality Straight sided deep drawing Hydraulic Press, which is specifically designed for Offering superior performance. Our product is equipped with PLC and LVDT depth control, in addition to an electronic safety gaurd ejector and automatic photo sensor. Because of its compact, rigid and space saver design, our product is widely used in making L.P.G. cylinders, geyser, s.s.Sinks, A.C.,Cooking hobs and other automobile components. Standard Equipments: The presses are supplied as complete units fitted with High Pressure Pump with Electric Motor, Pressure Gauge, Air Gauge, Limit Switch, Control Valve, Starter Oil tank(without oil), Micro switch, Roller Switch, Electric Panel Board etc.

Ps. all of the above specifications are approx. and nearest to the actuals. Any other parmenters if required shall be available on demand. Specifications of custom-built deep draw presses are made and available on requirment. Exhaustive job descriptions/detail are required to ascertain the particular model of deep draw press will be required for the purpose.

Automatic Brake and Friction Clutch system avoids double stroke - Crankshaft made of Carbon Steel - Suitable for Shallow and Deep Drawing Applications - For forming Round, Square, Oval and Rectangular Shapes - For making utensils like Pots, Pans, Tops, Covers, etc. from Stainless Steel, Brass, Aluminium, Copper, etc.

Our firm is engaged in offering quality range of tube expansion system, which are manufactured using latest technology and tools. Our skilled professionals design these products as per the latest trend to efficiently cater to the needs and requirements of the diversified clients. Our products possess unique features like low maintenance, energy efficiency and durability.

Toggle With Single And Double Action Science Labs Features Low cost, effective teaching Self contained Easily seen from a distance Mechanism clearly understandable Loci drawn for further study Standard mechanism foran operations gear Three year warranty Range of Experiments To determine the loci of the moving parts of the standard mechanism To establish the characteristics of that mechanism: for example to see which links move faster than othes or whether a particular motion (such as a straight line) is developed Description One of sixteen mechanisms built on an A3 board equally suitable for the classroom, drawing office or laboratory. The principal components are made from amber coloured Perspex, pivoted with hollow rivets, and mounted on a white melamine board for contrast and visibility. To see the mechanisms move is far more instructive and convincing than listening to a static lecture. The hollow rivets accept a pencil for transferring the loci of the joints to a sheet of paper, clipped to the board. The toggle consists of the two links AB and BC, C being fixed while A is a slider. The joint B is driven by a crank and connecting rod which for a singl action limits B to the Line AC. By increasing the stroke B will travel past AC and hence produce a second advance of A per revolution. This equipment is part of a range designed to both demonstrate and experimentally confirm basic engineering principles. Great care has been given to each item so as to provide wide experimental scope without unduly complicating or compromising the design. Each piece of apparatus is self-contained and compact. Setting up time is minimal, and all measurements are made with the simplest possible instrumentation, so that the student involvement is purely with the engineering principles being taught. Each mechanism is supplied with a manual which gives full instructions for producing the loci and applications of the assembly. The typical graphical result is appended..

Being a well-known name of the industry, we are occupied in the manufacture and supply of Metal Forming Press in the market.  These products are made by using top quality raw materials, which have been procured from trustworthy vendors of the industry, who hold rich knowledge of the domain.  Apart from this, these products are given at affordable rates.Features:High performanceLong service lifeCorrosion resistance500 ton Metal Forming Press

Being perfectly shaped and swift movement of our organization, we are instrumental in offering Extrusion Press. The offered press is manufactured with the help supreme quality material and cutting-edge technology in adherence to set industrial norms. We offer this press in number of technical specifications in.

These Double Action deep Drawing Presses have infinitely variable Die Cushion from the bottom for fine control of Draw Operation on Draw Quality MS, CS & SS sheets.The Press body is of sturdy portal construction through strong welding and needs no Tie Rods, Preloading & Tightening. A Well Guided cushion Housing held on top of the Ram & the cushion cylinder gives variable cushion tonnage.

Fully Solid State Design - no moving parts - no wear and tear of parts - no noise - consequently long life. Uses one main circuit board for easy maintenance. Accurately calibrated digital torque settings with a resolution of 1 watt makes torque settings accurate and can be easily reproduced for identical results. Soft start has been provided for all drives. This feature reduces starting currents in the drive. As a result, life of carbon brushes and drive increases. Connected drive is automatically recognised and indicated by means of LED on the torque controller. Trip time adjustable from ( 0 sec to 10 secs.). Adjustable reverse time from ( 0 sec to 90 secs.).

Hot Forging Hydraulic Press, Deep Drawing Hydraulic Press, Shearing Machine

Tube Expansion Systems, Tube Installation Tools, Tube Pulling System

Drawing Presses, Hydraulic Press Machin

We are well known for manufacturing, supplying and exporting of wide variety of tube expansion systems.

Hydraulic Forging Pres

Aluminium Tube Extrusion Press, Tube Annealing Ove

Metal Forming Presses, Tube End Forming Machine, Seamless Honed Tube