Industrial Plastic Pipes Dealers in Kalbadevi, Mumbai

Spiral Tubes that we provide are immensely used in advance composites industries. These Plastic Spiral Tubes are used to establish consistent vacuum throughout the mould in an evenly manner. These Spiral Tubes maintain vacuum throughout the mould even at full vacuum as these are capable of withstanding negative pressure without collapsing.Physical Properties : Material : LLDPE Diameter id : 8.5 mm 10 mm 12 mm 14 mm 16 mm Maximum temp : 125oc Thickness : up to 1.5 mm Availability & Packaging : Length of coil – 50 mtr 25 mtr Packing : each coil wrapped with a shrink film and then packed in HDPE bags Packing : the roll will be covered with polyethylene bag to prevent from dust and foreign contamination Handling : roll has to be handled properly having taken care of collapsing Storage : has to be stored in the place where the sharp edges are not present and should be stored at room temperature.

Type   Transparent PTFE Tube is extruded by polymerized PTFE resin with excellent chemical resistance, heat resistance, non-stick property and weather resistance. PTFE tube has 3 styles, including S style, T style and L style with different wall thickness and working voltage. PVC Heat Shrinkable Sleeve.

• No joints means no leaks. • HDPE pipe actually gains strength in lower temperatures and will expand at higher temperatures to avoid breaking. • HDPE pipe is designed to bend to a radius of 25 times its diameter. This means fewer 90 degree bends overall, less chance for water hammer, a reduction in leaks and easier installation, ideal for new constructions. • HDPE pipes strength and flexibility allows the pipe to absorb vibrations and stress caused by soil movements. With its ability to be compressed or deformed without permanent damage, pipe has even withstood the destructive forces of earthquakes. • Performs well in rocky conditions. • HDPE pipe can be buried at a shallow depth. • There are no joints to pull apart – a distinct advantage, where ledge rock prohibits excavation and very little cover is available. • Weatherability. • HDPE pipe can withstand long exposure to inclement weather conditions, excessive sunlight and ultraviolet rays, making it an excellent pipe for bridge crossings. • Withstands full vacuum. HDPE pipe will not collapse, even under a full vacuum, when the correct size is used for a required application. This allows for perfect utilization as intake piping at pumps stations.

Acrylic Clear/ Transparent Pipes: Standard Sizes: Outer Diameter O.D.: 10 mm to 60 mm; Inner Diameter I.D.: 6 mm to 50 mm; Length: upto 2000 mm (2 mtrs) Also; for OD 70 mm to 310 mm - wall thickness available 3, 4, 5 mm and length 600 mm and 1000 mm We can provide customized (special) sizes on request;   Extruded Acrylic Tubes are available from 10 mm to 60 mm OD and 6 mm to 50 mm ID; Standard Length is 1 or 2 mtrs Cast Acrylic Tubes Cast Acrylic is highly regarded for its optical clarity and outstanding light transmission properties. Cast Acrylic tubes are available from 70 mm to 350 mm OD; with wall thickness of 3,4 or 5 mm; Standard Length of 600 mm (2ft); Cast Acrylic Rod and Cast Acrylic Tubes are used in many applications in place of extruded or molded Acrylic because of better machining properties, greater clarity, better resistance to heat distortion and higher tensile strength. Applications: Chemicals, Flour Mills, Textiles, Electricals, Interior Decoration & Other Commercial use. For Dental Equipment, engineering craft Articles, Screen Printing, Packaging & Advertising. Acrylic, Sheet, Plastic, Tube, Rod, Sheets, Products, materials, UV, material, display, properties, tubing, cast, glass, cutting, custom, suppliers, supplies, fabrication, panels, rods, acrylics, displays, glazing, panel, about, plastics, information, facts, polycarbonate, thick, balls, extruded, shapes, translucent, pmma, etc

Nylon Pipe, Electrical Transformer, Transparent Cove

Keeping track with latest market development, we are devotedly engaged in offering wide assortment of HDPE Tube. This tube is a high density tube which is less flexible but has better physical and chemical properties, and withstands sterilization by boiling. It is widely used in transporting air, water and chemicals. We offer this product in variegated options, in order to fulfil ever-evolving requirements of our valuable clients, across the markets. Our product is praised for its various quality features. Features : Economical, high value pipe Superior design life and hydraulic capacity Features the rolled rim bell Fast bell-and-spigot joint assembly with proven structural integrity Rugged dependability Lightweight

DWC Pipes are made of High Density Poly Ethylene Polymers. The DWC pipes shall consist of two layers, the outer  and the inner layer shall be plain & smooth.   PRODUCT RANGE : DWC pipes are available in sizes 50 mm to 200 mm. APPLICATIONS : A. Telecom Application : Used as the main duct in sub duct network design. Protection of ducts and optical fibre cables in city networks. Protection of ducts / cables in rail & rail crossings. Protection of ducts / cables across rivers disused canals etc. Used as casing of copper cables. B. Electrical Applications : In the electrical networks, protective casing of street lighting cables-pole to pole application. DWC Pipe helps in: Easy laying of cable upon completion of civil works, easy maintenance of cables as free to move inside the duct, easy to replace the cables. In city distribution network protective casing application of power cables can be possible only after using DWC pipes. It is excellent and cost effective alternative of GI, RCC & PVC Pipes. It can be openly used for protective casing of street light cable as well as telecom cable.   FEATURES / PROPERTIES :   Resistance to chemical: Exceptional resistance to all internal & external corrosion. Will not rust or rot. Resistance to electrolytic corrosion. Easy to install. Longer life than GI, MS & RCC. Flexible, can be bent to a radius as low as 10 x OD of the duct. Very good thermal insulation due to low thermal conductivity. Light weight product for easy transportation, handling and fitting etc. Possibility of laying of additional ducts due to aligned joints, continuous length and smooth bends. Good mechanical properties and ability to take heavy loads.

The main reason being we have an excellent warehousing and storage facilities for both finished and semi finished goods.They are made ready as per the urgent requirements of the customers. The Pipes are manufactured to sustain very high pressure and product warranty.

The grades and sizes available make PTFE Tubing ideal for applications such as medical, chemical and automotives. PTFE Tubing is unique in many ways when compared to conventional polymer tubing: Highly resistant to corrosive chemicals Working temperature range of -200°C to +220°C Chemically inert - making it ideal for medical applications Extremely low coefficient of friction comes in sizes ranging from 1mm to 25mm diameters.

P.V.C. Duct Hoses and profile supplied by us are sturdy and resistant to high temperature. Ourrange of PVC corrugated hoses are durable in quality and have superior featureslike excellent insulation, high flexibility. Our wide ranges of duct hoseswhich are customized as per client specification are widely used in various allindustrial areas.

Cable PVC Duct, Cable Glands, Proximity Switches, Electric Panel Boar

We have acquired a prominent position in the markets as a Manufacturer, Exporter and Supplier of PTFE Corrugated Hose Pipes based in Mumbai. The PTFE Corrugated Hose Pipes are known for their efficient functioning in the various temperature conditions and can be availed in the standard as well as customized forms. Specialties Of PTFE Corrugated Hose Pipes Excellent temperature characteristics both in high and low temperatureExcellent chemical resistanceNon contamination propertiesLow coefficient of frictionResists deterioration

PTFE Pipe is Inseals Flagship product. Our resin is 100% virgin PTFE of the highest quality. Inseal offers a whole range of tubing materials including PTFE Tubes, PFA Tubes, FEP Tubes, and PTFE Hoses. Inseal is one of the best suppliers in India that offers tubes of various sizes and lengths according to you specifications. PTFE is an excellent material for tubing and pipes because of its following qualities: It is chemically inert – it resists aggressive chemicals, lubricants, and coolants It has a very low co-efficient of friction Its working temperature ranges from -200°C to +220°C

Pu Coil Tube are entirely tried by our quality auditors on set quality parameters to guarantee nature of the item. Every one of our items are planned utilizing fantastic crude materials and present day innovation tuned in to overall quality benchmarks.

Today, we have firmly positioned ourselves as one of the distinguished Welded Carbon Steel Tubes Exporters and Suppliers, based in India. Our Carbon Steel Tubes are manufactured from the finest quality carbon steel, under strict quality control. CS Tubes offered by us are high in performance and low in maintenance.

We are specialized in exporting and supplying qualitative range of Carbon Steel Pipes and Tubes. Our Carbon Pipes and Tubes have gained huge popularity in domestic and international markets because of their outstanding features, which include tensile strength, durability, corrosion resistant, abrasion resistant and many more. We are offering our premium Carbon Steel Pipes and Tubes at reasonable prices, without compromising their quality. Carbon Steel Standards : ASTM/ASME A53 GR A, B ASTM / ASME 106 GR.A, B, C API 5L GR. B, API 5L X 42, X 46, X 52, X 60, X 70. ASTM/ASME A 691 GRA, B, C   Range : 15 NB UP TO 600 NB IN SCH 5S , 10S ,10, 20 , 40S , 40 , STD , 60 , 80S , 80 , XS , 100 , 120 , 140 , 160 & XXS Form : Seamless / ERW / Welded In Round & Square.

We are instrumental in manufacturing, exporting and supplying optimum quality Carbon Steel Seamless Tubes. Our Carbon Steel Seamless Tubes are designed using high grade carbon steel in standard and customized dimensions. Ensuring high durability, our Carbon Steel Seamless Tubes are finely treated in different finishes. They are stringently tested by the adroit professionals in order to ensure flawless ness. Carbon Steel Seamless Tubes are used in the most critical engineering applications and also in certain applications in the automotive sector.     Grades :- Tubes are available duly with I.B.R (Indian Boiler Regulation Act) Test Certificate. BS-3059 Gr. 320. Specifications of 213, 209, 200 in Grade, T11, T22, T5 & DIN 17175, 15 MO3, 13CrMo44, 10CrMo910 BS/3059/II/360, ASTM A192, DIN 17175, ST35.8 & 45.8, ASTM A210 Grade A-1, ASTM A 210 Grade C. BS-1775.