Instrumex Malad West, Mumbai, Maharashtra

A weather monitoring station is a facility with instruments and equipment for measuring atmospheric conditions to provide information for weather forecasts and to study the weather and climate. It is available with Solar Panel and Mounting Accessories. The data is stored in a 2GB MicroSD card and also transmitted over to a central server through GSM/GPRS and data from this server can be downloaded into the PC. A GPRS activated sim card is required for data Transfer to network. Data from this network is available through internet irrespective of the location of installation. All the sensor are Davis, USA make.   The Weather Monitoring Station Provides Measurement Options For Wind Direction Wind Speed Temperature Humidity Rainfall Solar Radiation Barometric Pressure Leaf Wetness Leaf Temperature Soil Temperature   WindEx Wind Rose And Wind Trend Plotting Software Wind Rose & Wind Trend Plotting Software is an extremely simple tool to generate Wind Rose diagrams and Wind Trend plots from the data fetched by Instrumex Weather Monitoring Station. A wind rose is a graphical tool used to show wind speed and wind direction for a particular location over a specified period of time at a specific location. To create a wind rose, average wind direction and wind speed values are logged at a site, at short intervals, over a period of time, e.g. Every 5 minutes (In case of Instrumex Weather Station), 1 Hour, 1 Day or longer. The collected wind data is then sorted by wind direction so that the percentage of time that the wind was blowing from each direction can be determined. In case of Instrumex WindEx, the wind direction data is sorted into sixteen equal arc segments, 22.5° each segment, in preparation for plotting a circular graph in which the radius of each of the twelve segments represents the percentage of time that the wind blew from each of the twelve 22.5° direction segments. Wind speed data can be superimposed on each direction segment to indicate, for example, the average wind speed when the wind was blowing from that segment's direction and the maximum wind speed during the logging period.

Automatic Grade : Automatic

Application : Weather Monitoring

Country of Origin : 3-6VDC

Wire length : 100-200mm

Availability : 4000-8000gm

VB-8201HA is used in Applications for industrial vibration monitoring : All industrial machinery vibrates. The level of vibration is a useful guide to machine condition. Poor balance, misalignment and looseness of the structure will cause the vibration level increase, it is asure sign that the maintenance is needed.   Features Professional vibration meter supply with vibration sensor & magnetic base, full set. Auto shut off saves battery life. Built-in low battery indicator. Heavy duty & compact housing case Memory function to record maximum and minimum reading with call. Super large LCD display. RMS & Peak measurement. Optional data acquisition software. Separate vibration probe.

Thermoelectric Gaseous Sampling Kit is a Gaseous sampling kit with automatic temperature control. It employs a Peltier cooling system and a thermostat for setting the desired temperature between 0 – 60 Deg C. Automatic temperature control eliminates the need of changing the cold water after every few hours for ensuring that the reagents do not evaporate due to excessive ambient heat.   It has a built-in mini vacuum pump of capacity 10LPM.   Housed in a high impact plastic assembly, this kit is extremely portable rain/dust proof. The system works on 230V, ACpower.   The Kit Consists Of Following: Calibrated Rotameter (0-3LPM) 4 way Acrylic manifold with flow adjustment through needle valve 4 impingers of 35ml. capacity Impinger stand Connecting tubes made up of Silicon.

Standalone Gaseous Sampling Kit enables sampling of 4 gases at a time. Housed in a light weight powder coated aluminum assembly, this kit is extremely portable rain/dust proof. A digital timer for automatic start and stop provision ensures accurate sampling time.   The vacuum pump is a diaphragm type housed inside the cabinet with for exhaust fans. This ensures that the temperature inside the kit does not rise due to heat generated by the pump.The system works on 230V, AC power.   The Kit Consists Of Following : Calibrated Rotameter (0-3LPM) 4 way Acrylic manifold with flow adjustment through needle valve 4 impingers of 35ml. capacity Ice Tray & impinger stand Connecting tubes made up of Silicon.

Model Number : IPM-110

Power : 230V, AC

Packaging Type : Box

INSTRUMEX STACK MONITORING KIT IPM-112 is designed to serve the most crucial purpose of measuring the total volumetric discharge of particulate matter and gaseous pollutants from the stacks. This efficient and flexible system samples, all gaseous stream effluents in accordance with the Air {Prevention and Control of Pollution) Act of 1981 by which all industrial establishments have to measure and monitor emissions from their plants and keep them under controlled limits. It takes accurate isokinetic samples of the effluents in the emissions from chemical and combustion process. Designed to operate with its sampling probe in a horizontal or vertical position, this versatile unit can be used in round or rectangular stacks and ducts with flow velocities from 1 to 40 m/sec and temperatures up to 600C or higher with optional accessories. It collects particulate samples (down to 0.3 dial) sulphur dioxide gas (SO2) sulphur trioxide (SO3), Sulphuric Acid mist (H2SO4), Oxides of Nitrogen (NO3), Water vapors and many other gases which can be measured by Chemical methods.   Key Features Lightweight powder coated control unit is provided in four separate boxes for easy handling Digital readout for temperature of dry gas meter and stack gas. Dry gas meter for total flow measurement Unique Tapered thimble holder for leak proof collection Six glass impingers Acrylic rotameters for flow measurements Light weight monoblock vacuum pump Inclined Manometer with 0.01 inch WG resolution with spill proof arrangement S- type pitot tube of 1.5-meter length individually calibrated as per EPA regulations ( I.I.T.Mumbai) S.S. Thermocouple of 1.5-meter length

Material : Metal

Application : Stack Monitoring

Feature : Accuracy, Easy To Fit

Display Type : Analog

The GA607 meets the demanding standards of a class 1 calibrator. It features two calibration levels, 94dB and 104dB re 20μPa both at 1kHz. It is for use with 1/2" microphones. Using the GA607, a sound level meter can be checked at two meter scale points and usually on two ranges. Supplied with GA690 barometer   Features Dual Level - 94dB & 104dB relative to 20μPa Built to the requirements of IEC60942:2003 Sound Calibrators Class 1/C. It is supplied with a ½" cavity.

Temperature Range : -10°C To 50ºC

SL-4030 is a Sound level meter is a mini pocket type, IEC61672, Class-2 Sound Level Meter. It has durable, long lasting component including a strong, light weight ABS plastic housing case. Its pocket and light weight design allow for one-hand operation.LCD display for low power consumption & clear read-out even in bright ambient light condition.   Features Large LCD Display, easy to read Time Weighting & Frequency weighting meet 0.5" standard out size of the microphone. External calibration VR. Condenser microphone for high accuracy & long-term stability Low battery indicator. Pocket and light weight design allow one hand operation. Warning indicator for over and under load.   Power Supply 006P DC 9V battery (heavy duty type) DC – 9V adapter input (AC/DC Power optional)

Frequency Range : 31.5 to 8 KHz

Resolution : 0.1dB

Accuracy : Class 2 / Type 2

The HTC-1350 is a highly featured instrument to be used for sound level measurement. It is easy to use, having advanced features and user friendly. It has RS-232 communication which optional too. It basically used to measure the current sound pressure level, Equivalent Continuous A sound pressure level & statistic analysis.   Features : Auto Manual Shutdown Low battery indicator DC Output – 0-1.3V 10mV.db 94dB in full calibration at (1KHz) Optional RS-232 Communication Alarm Volume: 30-130dB Alarm O/P : LED optional relay output Backlight

Frequency : 31.5Hz

Resolution : 0.1 dB

Accuracy : 1dB

The MicroDustec 500X is the latest addition in the list of Environmental Monitoring Innovations by Instrumex. This is the most comprehensive dust monitoring solution that can measure dust particles as low as 0.3μ upto 10μ. Housed in an IP67 protected case, this unit is capable for outdoor continuous monitoring. Extremely portable & Light weight unit ensures maximum mobility. Available in 3 different models 5003, 5006 & 5009.   Size Channels 5003 – 3 Channels (1.0µm, 2.5µm, 10µm) 5006 – 6 Channels (0.3µm, 0.5µm, 1µm, 2.5µm, 5µm, 10µm) 5008 – 8 Channels (0.3µm, 0.5µm, 0.7µm, 1µm, 2.5µm, 4µm, 5µm, 10µm)   Calibration Particle Counter as ISO 21501-4 2007 Temperature & Humidity as per ISO 17025

Tiger is the most advanced hand held VOC detector on the market with the widest measurement range, accurately detecting gases down to ultra low ppb levels up to 20,000ppm. Tiger has the fastest response time of just two seconds, and is as quick to clear down. Its internal gas table contains over 480 response factors. The instrument's photoionisation detection (PID) technology has been independently verified as best performing on the market for speed, accuracy, resistance to humidity and contamination.   Key Features Best Available Photoionisaton detection Minimize Downtime Ease of use Safety Low cost operation   Battery Life Li-ion – life upto 24 hrs continual use Alkaline –(Duracell Pro cell NM1500)upto 8.5Hrs   Intrinsically Safe Approvals ATEX II2G Ex ib IIC T4(-150C\< Ta\ < +450C IECEx ITS 10.0036X US and CANADIAN Approval

The Model IPM-971 is the latest addition in the Instrumex brand of Air Samplers. It is the most compact Air Sampler with customized flow range options. It accommodates a rugged diaphragm pump which is capable of continuous operation without overheating. Specially designed for workplace & indoor environments, the IPM-971 has also proved its prowess in outdoor environments with medium to heavy dust density. A programmable timer allows automatic sampling and with inbuilt charging circuit ensures continuous sampling in AC power while the battery is being charged. Provision to accommodate 2 mdiget glass impingers (35m1. Capacity) for gaseous sampling.   Devices For Sampling Acrylic Filter Holder to accommodate Filter Papers (size 25mm & 47 mm Dia.) 2Nos. of Glass Impingers to analyze Inorganic Gases Such As SO2, NOx, etc, Activated Charcoal Tubes for analysis of Hydrocarbons & Solvent Vapor.   Key Features Simultaneous Sampling of Dust & Gases Rechargeable Battery with Run time 10Hrs. Programmable Timer, Automatic Start & Stop Option for 0-5LPM, 0-500mLPM, 0-200mLPM Extremely Portable & Ultra Silent operation   Application To determine the General Background Levels Industrial Hygiene, Personal Exposure Monitoring Verifying efficiency & effectiveness of control measures

Power Source : Electric

Application : Air Sampling

Rated Voltage : 220V

Total Carbohydrate : 1yr

Huma-i (HI-100/HI-120/HI-150)Portable Air Quality Monitors Huma-i black is a portable air quality monitor, which measures CO2, VOC, PM2.5, PM10, Temperature and Humidity. Its excellent portability will help you measure air quality in real time anytime & anywhere. You can carry it with you at all times for the peace of mind you deserve.

Instrumex Ambient Fine Dust Sampler is designed as per USEPA guidelines for sampling of PM2.5 and PM1 0 particles in Ambient Air. The USEPA based WINS impactor separates the particles smaller than 2.5p by the principle of impaction at a regulated flow of 1 m3/hr. A critical orifice controls the flow throughout the sampling period. PM1 0 particle sampling is achieved by replacing the WINS impactor with a downtube.   Key Features Light Weight & Low cost monitoring Solution Confirms to U.S. EPA guidelines Choice of Sampling inlets for PM2.5, PM10 and TSP Construction suitable for outdoor use   Clock / Timer System Programmable Real Time control system with automatic start & stop Digital display of date, time & time of sampling. Accuracy ± 2 min / month.   Optional Gaseous Sampling Attachment Thermoelectric Gaseous Sampling Kit Automatically Maintains Temperature Constant between 10-15 Deg C. Provision of 4 glass impingers (35m1. capacity) 4 way Acrylic Manifold with needle valve for precision flow control Impinger stand for accommodating impingers 0-3 LPM Rotameter for flow setting   In-built Gaseous Sampling Kit Attached to the instrument with an aluminum box and Ice Tray Requires regular monitoring of cold water or Ice to prevent evaporation of reagents M Provision of 4 glass impingers (35m1. capacity) 4 way Acrylic Manifold with needle valve for precision flow control Impinger stand for accommodating impingers 0-3 LPM Rotameter for flow setting

Instrumex Respirable Dust Sampler is a versatile dust sampler that is based on a design standardized by CPCB for collection of PM10 & Totoal Suspended Particulates (TSPM) in ambient air and also simultaneously samples the particulates having aerodynamic diameter less than 10 Micron.   Features Simultaneous Sampling of PM10 & TSPM Brushless & Noiseless Blower Motor Programmable Timer Rugged construction for heavy duty usage Voltage Protection Relay for superior motor protection   Instrument Overview Instrumex Respirable Dust Sampler employs heavy duty Brushless and Noiseless blower that draws air through a size-selective inlet and through a 20.3 X 25.4 cm (8 X 10)" filter at a flow rate, which is typically between 0.9 — 1.4 m3/min maintained by an Orifice. A cyclonic flow technique is used to separate the particles with aerodynamic diameter less than the cut-point of the inlet (PM10). These are collected by the filter. The particles greater than 10 micron are separated at the bottom of the cyclone into a dust collecting bottle. The mass of PM10 particles is determined by the difference in filter weights prior to and after sampling. The concentration of PM10 in the designated size range is calculated by dividing the weight gain of the filter by the volume of air sampled.   Gaseous Sampling Normal Gaseous Sampling Kit: Aluminum enclosure housing an Ice tray attached at the back of the instrument with following provisions: Impinger stand for 4 nos. of glass impingers. 4 Way acrylic manifold with needle valves for precision flow control 0.3 - 3LP M rotameter for flow setting 4 Nos. of glass Impingers. (cap. 35m1.)   Thermoelectric Gaseous Sampling Kit: In tropical weather where temperatures can soar above 35°C, the reagents in the impingers tend to evaporate quickly. This results in erroneous reporting of the Gaseous pollutants. Instrumex Thermoelectric Gaseous Sampling Kit is a separate enclosure with a Peltier cooling system that automatically maintains temperature between 10 - 15°C. Thereby completely eliminating the hassle of replacing the ice/cold water after every few hours   Optional Extras Chemical Kit for sampling of SO2, NO2, NH3 & 03 Dust Sampling Bottles G FA Filter papers, Size (8x10)" Whatman EPM 2000 filter paper, Size (8x10)"

Number Of Flower : Respirable Dust Sampler

Material : Heavy Duty Construction Materials

Application : Collection Of PM10 & TSPM In Ambient Air

Purity : Simultaneous Sampling Of PM10 & TSPM,Brushless & Noiseless Blower Motor,Programmable Timer,Rugged Construction For Heavy Duty Usage,Voltage Protection Relay For Motor Protection

Number Of Flower : PM10, PM4, PM2.5, PM1

Material : Aluminum

Use : Personal Monitoring Sampler

Packaging Type : Box

Application : Industrial

Real Time Dust Monitor with Temperature & Humidity The MicroDustec 500X is the latest addition in the list of Environmental Monitoring Innovations by Instrumex. This is the most comprehensive dust monitoring solution that can measure dust particles as low as 0.3μ upto 10μ. Housed in an IP67 protected case, this unit is capable for outdoor continuous monitoring. Extremely portable & Light weight unit ensures maximum mobility. Available in 3 different models 5003, 5006 & 5009   Size Channels 5003 – 3 Channels (1.0µm, 2.5µm, 10µm) 5006 – 6 Channels (0.3µm, 0.5µm, 1µm, 2.5µm, 5µm, 10µm) 5008 – 8 Channels (0.3µm, 0.5µm, 0.7µm, 1µm, 2.5µm, 4µm, 5µm, 10µm)   Communication USB Port (Option for Ethernet / RS232/ RS485) GPRS Modem for sending Real Time data online.   Calibration Particle Counter as ISO 21501-4 2007 Temperature & Humidity as per ISO 17025

Power : 230V, 50Hz AC Adapter with country Specific plug

Availability : 2.2lbs (1kg.)

NK107 is an Outdooor Monitoring Station, Dedicated Application Specific Measurement Templates and with Occupational safety mode. It provides 1/1 & 1/3 Octave Band Analysis. Is also has Linear Operating Range of 95dB. NK107 has Hearing Protection Database With a battery back up of 48 Hours, the system can run trouble free in outdoor atmosphere without any external continuous power.   Features 48 Hour battery back up User 'Templates' for Personal Preference Hearing Protection Database Voice Note Recording Statistical Noise (L1 to L99) 1/1 & 1/3 Octave Band Analysis   Frequency Range 1 Hz - 20 kHz (electrical characteristics) Class 1: 12.5 Hz - 20 kHz (including microphone)   Power Supply Batteries: 4 x AA (1.5V) Life: Up to 12 hours continuous operation (screen settings dependent) USB Socket   Dimension Including Pre-Amplifier: 210mm (H) x 70mm (W) x 30mm (D) Excluding Pre-Amplifier: 145mm (H) x 70mm (W) x 30mm (D)

EQMS (Effluent Quality Monitoring System) technology is based on unique method FTLS UV spectroscopy which associate proprietary high resolution spectrograph with Fourier Transform & Least Square mathematical treatment. So, you can believe in our knowledgeable and responsive support team to address your unique needs for the water or air applications throughout your entire process.   Our goal for the future is to continue to provide customers with reliable instruments, proven methods, easy procedures, and outstanding technical support. We will strive to be best choice brand offering trust and assurance to our customers.   Measuring Principle EQMS (Effluent Quality Monitoring System) analyser is based on Ultraviolet/Visible (UV/Vis) absorption, which has found increasingly wide application in process industries. The spectrum of interest here extends from 180 nm to 780 nm. Direct absorbance for UV254, COD, BOD, TOC, NO3, COLOR, PO4 , pH, TSS and Cr bring fast and stable measurements. This unique method allows measurements on extremely turbid or colored samples like Exceptional selectivity and no interference has never been reported after years of operation on many different applications. The patented flow cell allows very high level of suspended solids without clogging. The turbidity is automatically compensated by a dual-wavelength method. The UV source is a Xenon flash lamp specified for 109 flashes that corresponds to more than 10 years of life time with one measurement every minute. Physico-chemical measurements like pH, ORP, dissolved oxygen, conductivity can be added to the internal measurements by using external probes. The dissolved oxygen probe is based on fluorescence method for a lower maintenance and higher stability.

Application : Industrial Use

Feature : Durable, High Speed

Country of Origin : 220V

Frequency : 50HZ

Total Carbohydrate : 1year

Powerful, yet small and lightweight, the Castle GA257L noise dose meter combines the latest technological advances with a realistic price tag. With it's clear and easy to read 8 character alpha numeric display, soft-touch keypad, electronic security lock and instant calibration facility, the GA257L is sure to prove invaluable in a wide range of occupational health applications.   Features Measures Lp, Lep'd, Dose%, Dose per Hour andPa2H Measures simultaneously LAeq and either LZeq or LCeq User selectable Exchange rate, Threshold and Criterion level. C or Z weighted Peak Save results to internal flash memory Download data to a PC via a USB connection Analysis software included with the meter Small and light weight, fits into small shirt or jacket pocket Lockable Key pad Constructed of tough crack resistance plastic. Single battery operation of approximately 12 hours Supplied with a strong clip for attaching to a belt or shirt pocket

Accuracy : Class 2 / Type 2

Display Range : 69 – 141dB

It's simple automatic operation, continuous measurement and digital display of all or any selected gas and derived parameters make it a valuable aid for on-site instant analysis and follow-ups action. Its data logging and computer interface features can be used for further detailed analysis. It is a Compact, Rugged and Intelligent instrument for Ambient Monitoring, Pre-Entry Check, Quality Control Process Or Emission Gas Analysis, Fuel Combustion Optimization.   Key Features Automatic Operation Self Diagnostic Check Proven Sensor Technology Accommodate Up to 4 Sensors Continuous ,Stable Alphanumeric Display Diffusion or Suction Sampling Long Life Rechargeable Batteries Data Logging and RS232 Output Capability Intrinsically Safe

Accuracy : +/-2% & 0.5 for O2

Instrumex brand Kbr Hydraulic Pres os suitable for making 13mmm dia die Or Ultra micro die with a set of Evocable Kbr Die for IR Spectroscopy solid sampling. The die produces a disc of 13 mm diameter from which a spectrum may be obtained. Using full beam energy if the instrument without use of a beam condenser. A nipple is fitted in the die for evacuated. This die easily can be dismental for cleaning purpose.   Accessories For IR KBr Press KBr Die Plunger ANVIL Pelet Holder Pelet remover KBr/Nacl window/cell

Availability : 30KG

Country of Origin : 220V, Mechanical

Condition : New

Automatic Grade : Automatic

Total Carbohydrate : 1year, 1 Year

Country of Origin : India

Lutron LX-101A is a Precise,easy readout and wide range lux meter. It provides high accuracy measurement. It has Built in low battery indicator. It is compact, light-weigth and gives excellent operation. Its LCD display can clearly read out of even of high ambient light.   Key Features Sensor used the exclusive photo diode & multi-color correction filters, spectrum meet C. I. E. standard. Built-in low battery indicator. Sensor COS correction factor meet standard Separate LIGHT SENSOR allows user take measurements of an optimum position. LCD display provides low power consumption.

Display : 13 mm ( 0.5" ) LCD

Sampling Time : 0.4 Second

Power Supply : DC 9V battery. 006P, MN1604 ( PP3 ) or equivalent.

The Model IPM-971 is the latest addition in the Instrumex brand of Air Samplers.   It is the most compact Air Sampler with customized flow range options.   It employs a rugged diaphragm pump which is capable of continuous operation without overheating. Specially designed for workplace & indoor environments, the IPM-971 has also proved its prowess in outdoor environments with medium to heavy dust density. A programmable timer allows automatic sampling and inbuilt charging circuit ensures continuous sampling in AC power while the battery is being charged. Provision to accommodate 2 mid get glass impingers (35ml. Capacity) for gaseous sampling.   Key Features: Simultaneous Sampling of Dust & Gases Rechargeable Li-Ion Batteries for 8 hour Run time Programmable Timer Option for 0-5LPM, 0 – 500mLPM or 0 – 200mLPM Ultra Silent operation

Model Number : IPM-971L

Packaging Type : Box

Instrumex is one of the leading manufacturing and export companies providing the market with many Pollution Measuring & Analytical Instruments in Mumbai, Maharashtra. We provide Environmental Monitoring Device Calibration services for a wide variety of industries, manufacturers, and models. Get environmental Monitoring Device Calibration, maintenance, repair, and sales at an affordable price with us. We are known to give superior quality of products used in a variety of industries. These products are available at market leading prices, and we are also open to customizing the products to suit your requirements. When performing Environmental Monitoring Device Calibration, our technicians test the full range of instruments by your directives, specifications, and regulatory requirements. Contact us now.

Product Training forms an integral part of our Installation & Supply. We provide in depth training for operation and maintenance of the products manufactured by us.   Apart from the Product Training, we also provide training for Laboratory operation covering following scope:

We undertake repair & maintenance of all kinds of Environmental Monitoring Instruments of any make.   Our Annual Maintenance Contracts & Comprehensive Maintenance Contracts help our clients in ensuring that the instruments are always up and running with minimal costs.   We have a team of engineers who are capable of attending on-site maintenance visits across India within 2 days of receiving service requests*.