Hydraulic Machine Dealers in Mumbai

Ram & Table designed with inclined member and box type structure for maximum strength. Positive holding of Hyd. Hold downs avoids slippage of sheet during    cutting stroke. HCHCr Blade suitable to MS & SS. Hardened Transfer bars. Front gauging by disappearing stoppers mounted on front squaring arm.   SPECIAL FEATURES   The stable robust, all welded steel frame from ultrasonically tested plates are of top quality. Ramand table designed with special inclined member and box type structure for maximum strength. The top beam is guided by three point roller with replaceable hardened liners for least wear.This eliminates lubrication of guides. Roller guide made of hardened & ground bearing steel to provide better quality of cutting for a long time. Rake angle can be varied to permit shearing of higher thickness than nominal capacity and facilitating distortion free shearing of thin sheets. The fastest and easiest way of blade clearance setting without need of feeler gauge, which helps Burr-free edges. Positive holding by hydraulic holddowns before shearing avoids slippage of sheets and independent       operation of holddowns for clamping of sheet helps checking of mark without taking shear stroke. Front gauging by disappearing stoppers mounted on left squaring arm. Robust, heavy & accurateback gauging to set cutting width. Hydraulic cylinder are designed with both low and high pressure sealing, Hard chrome plated rod also with special type guide for long life without leakage. Hydraulic components of international quality assembled in our own factory with specially designed compact manifold   STANDARD ACCESSORIES   Main Drive motor Electric Control Panel Operational Console Pre selector switch to adjust rake angle   Lever operated blade clearance with calibration Fine stroke adjustment rod with limit switch Front sheet support  Squaring arm on right end with steel rule Hardened transfer bar mounted on table  Hold down cylinders   Shadow light Indicator Four edge HCHCR / HCSR blade interchangeable & suitable to shear mild and St. Steel Manual back gauge   OPTIONAL ACCESSORIES   Second squaring arm on left side Motorised back gauge with DRO NC back gauge with ball screw Front support with rolleraccording to required length Rear sheet support Ball transfer table Degree protector for angular cutting Stroke counter Design with throat depth First fill of hydraulic oil

We have parted our infrastructure into several units and one of them is storehouse. We update it on regular basis so as to meet stated industry standards. With strong industrial experience, we make sure that the packaging is done as per the stated norms, by this; the products that we deliver are absolutely safe from the getting damaged. We make available, Hydraulic Pumps Spare Parts, which are acclaimed for their sturdy make and durability.      Features : Rust-proof High performance Durable Sturdy construction Excellent finish

Universal Ironworker so far as the shearing, punching, notching / coping and cropping of flats, plates, squares, rounds and structural sections of any shape are concerned. The coping head is of vary study design and construction and can be easily and quickly turned into a notcher or alternatively into a punching head. Agin it can be fitted with special tool holder and tools for notching T section in both flanges simultaneously. Back stops and gauges can be supplied for production job at extra cost and they will in no way interfere with the shearing of plates or other operations. The standard machine is equipped with clutch : Mechanical hand lever operated Gears : Made of steel Motor : AC, 440/3/50 totally enclosed fan cooled with V belts, pulley, Starter and sturdy guards. Blades : To cut sheets, flats, angles, T, Round, Square bar cutting, V notching or punching attachment (specify while ordering)   OPTIONAL ATTACHMENTS : Wheel mounting cabinet stand Special attachment & tools such as blaes, punches and dies to obtain a wider range of application possiblites

This is a steel fabricated body hydraulically operated 300 tons press specially designed for making gold and silver coins, bars and medals.  This is an upstroke press with higher ram travel speed and with extra hydraulic cylinder for return stroke to increase the production. The press is equipped with hydraulic Power Pack consisting of Piston Pump, Electric Control board operated directional Control Valve, relief Valve, Pressure Gauge and standard hydraulic accessories. It can be operated through the control panel board or manually and has the provision to adjust the coining pressure. A timer is provided to adjust the time for which the pressure is applied before return stroke. Our standard version Hydraulic Coining Press is available in four models: 50 Tons, 100 Tons, 200 Tons and 300 Tons Capacity. We can also supply you PLC controlled multi stroke feature auto ejector type hydraulic coining press for making gold and silver coins and bars from 1.0 gram up to 100.0 grams.

'YSD' - HYDRAULIC | NC PRESS BRAKE ARE EQUIPPED WITH TORSION BAR TO ENSURE THE   PARALLELISM & SYNCHRONISM BETWEEN THE BEAMS.   MANUALLY ADJUSTABLE CROWNING ON THE TABLE IS A OUTSTANDING FEATURE FOR ALL PPT/PPTK SERIES MACHINES.   THE HYDRAULICS AND  ALL THE OTHER MAIN COMPONENTS ARE OF RENOWNED FAMOUS BRANDS LIKE REXROTH / VICKERS / MERKEL ETC. THE MACHINES ARE SUPPLED WITH HARDENED GROWND PUNCH &  MULTI V DIE. TOOLING  CAN BE SUPPLED AS PER CLIENTS REQUIRMENT AS A OPTIONAL

Enerpac features an extensive line of strong, durable hydraulic presses designed to provide long-lasting, precise and safe application of effective force in your workshop. Enerpac’s maintenance presses are available in a wide range of sizes and capacities, from 5 – 200 tons, or you can ‘build your own’ to unique specifications. Enerpac’s press frames are welded for strength - not bolted together - and feature corrosion-resistance surfaces. Our exclusive Roll-Frame design provides tremendous flexibility and ease of use.