Jairam Lab Solutions Goregaon, Mumbai, Maharashtra

Double walled unit Outer GI powder coated Inner S.S. 304 Insulation provided to minimize heat loss S.S. lid on top with provision for holding Viscometers holders Hermetically Sealed CFC Free Emerson Compressor Temperature range: Above ambient to 99℃, -10℃ to 99 ℃ Application:  Equipment specially designed for tests in the field of medical Agricultural Bio-chemical R & D & Q. C. Laboratories

Vertical Laminar Air Flow Cabinet is fabricated using thick board in Sunmica Clad, Mild Steel Powder Coated and Stainless Steel finish The working of these laminar air flow cabinets are also supported by one or two  HEPA filters as well as requirement of working air supply of AC 230V, 50/60Hz.  Air drawn through pre- filter passed through efficient working HEPA filters with efficiency ratings that are as high as 99.99% which supports retaining air borne particles of size 0.3 micron as well as larger

Features :  System provide necessary sterilization support in laboratory Comes with optimum load diversity and load volume handling Provides fast cooling with optional waste treatment and drying options Meets the complete sterilization requirements including of instruments, glassware, liquids, culture media, pipette tips, contaminated media, biological waste Also suitable for agar preparation processes Neoprene rubber based gasket support Pressure vessel, external walls, lid, basket provided in stainless steel sheet finish Comes with accessory support comprising low water level cut off device, digital timer, pressure control switch, vacuum breaker   Applications :    Used in chemical reactions in pharma & chemical industry Used for pre-disposal treatment and sterilization of waste material Use for sterilizing instruments, glassware and plastic ware Suitable for use in laboratories and research institutes

Sturdy double walled units. Inner wall made of Stainless Steel Outer wall made of Mild Steel powder coated Temp. Range of 50 ºC to 250 ºC Air ventilation is provided on the top of both the sides. Front Door opening with high grade Door gasket Equipment provided with wheel support for easy mobility High grade  insulation support provided to minimize the heat loss Microprocessor based PID digital temperature controller cum Indicator provided for precise control More Details: Long lasting heating elements for rapid heating and uniform temperature. Inner full length glass door for viewing of specimen without disturbing in chamber temperature condition  Circulation motor is provided for air circulation & uniformity  Trays provided with adjustable runners Applications :For applications for vacuum ovens like – Preheating Quenching Sterilizing Aging Annealing Baking Brazing Soldering Burn-off Curing Drying

Double Walled unit. Inner chamber and top lid (pyramidal) made of S.S Outer chamber made of M.S with powder coating. Gap between the walls filled with  insulation to avoid the heat loss. The inner chamber heated with immersion type heating elements is covered. Temp. range 5 degree c above ambient to 60 degree c with Accuracy: +-2 degree c. Long lasting heating elements. To operates on 230 volts A.C. Only. Applications : Finding usage in bacteriological and other laboratory applications that require incubation and general testing support like in Biotechnology Clinical Environmental Medical Petroleum Pharmaceutical Industrial Applications

Features :  System finding suitability for boiling as well as general purpose working Water bath developed using long lasting single walled kettle element System made available in thick gauge stainless steel finish with lid support featuring 6 or 12 holes with concentric rings Thermostatic based temperature control provision Mineral wool based insulation support that provides for maintenance of inner temperatures System supporting temperature range from ambient +5 ℃ to 95 ℃ ∓0.5 ℃. System works on electrical supply of 220/230v ac, 50/60hz Applications: Used in areas like –  Industrial clinical laboratories Academic facilities Government research laboratories Environmental applications

It is light weight and fast heating equipment. Most useful for Ashing, Fasions, Igniting and heat treating of small parts in chemical, industrial fields, colleges. Out side body made up heavy gauge M.S / G.I duly powder coated Inner muffle with high Temp. Insulating material. Maximum temperatures 1000 degree c / 1200 degree c & working temperature 930 degree c / 1130 degree c. Temp. controlled by Digital Temperature Controller cum Indicator. Heating elements made up of kanthal wire would extremely on the muffle. Control panel fitted on top of the units with indicating Lamps & Switches. A Uniform heat distribution through all 4 side with kenthal wire. A special solid state silver fuse for protection to elements in case of over heating. Operates on 230 Volts A.C only. Various Size available.

Sturdy triple walled units. Inner wall made of Stainless Steel Outer wall made of Mild Steel powder coated Front Door opening with high grade Door gasket Equipment provided with wheel support for easy mobility  High grade  insulation support provided to minimize the heat flow High grade  insulation support provided to minimize the heat flow   Microprocessor based PID digital temperature controller cum Indicator provided for precise control Details: Long lasting heating elements for rapid heating and uniform temperature. Inner full length glass door for viewing of specimen without disturbing in chamber temperature condition Temperature range 5 ℃ above ambient to 60 ℃.

Sturdy double walled units Inner wall made of Stainless Steel Outer wall made of Mild Steel powder coated Temp. Range of 50 ºC to 250 ºC  Front Door opening with high grade Door gasket Equipment provided with wheel support for easy mobility High grade  insulation support provided to minimize the heat loss Microprocessor based PID digital temperature controller cum Indicator provided for precise control More Details: Long lasting heating elements for rapid heating and uniform temperature Inner full length glass door for viewing of specimen without disturbing in chamber temperature condition Circulation motor is provided for air circulation & uniformity  Trays provided with adjustable runners     Applications:  For variety of thermal processing applications like Component & stability testing Core hardening General lab work Drying

Sturdy triple walled units. Inner wall made of Stainless Steel Outer wall made of Mild Steel powder coated Temp. Range of 50 ºC to 250 ºC Air ventilation is provided. Front Door opening with high grade Door gasket Equipment provided with wheel support for easy mobility High grade  insulation support provided to minimize the heat loss Microprocessor based PID digital temperature controller cum Indicator provided for precise control More Details: Long lasting heating elements for rapid heating and uniform temperature. Circulation motor is provided for air circulation & uniformity

Sturdy triple walled units. Inner wall made of Stainless Steel Outer wall made of Mild Steel powder coated Temp. Range of 50 ºC to 400 ºC Front Door opening with high grade Door gasket Equipment provided with wheel support for easy mobility High grade  insulation support provided to minimize the heat loss Microprocessor based PID digital temperature controller cum Indicator provided for precise control More Details: Long lasting heating elements for rapid heating and uniform temperature. Inner full length glass door for viewing of specimen without disturbing in chamber temperature condition Circulation motor is provided for air circulation & uniformity Trays provided with adjustable runners   Applications: Finding usage for dry heat to sterilize articles Finding suitability in Hospitals and laboratories  

Double walled unit.Outer GI powder coated Inner S.S. 304

Temperature range of memmert type incubator is 5 ℃ to 60 ℃.Temperature accuracy - 0.5 ℃ Sturdy triple walled unit. Inner chamber of memmert type incubator is made of stainless steel & outer chamber made of M.S/G.I. with powder coating. High grade insulation support provided to minimize the heat flow. Microprocessor based pid digital temperature controller cum indicator provided for precise control. More Details: Long lasting heating elements for rapid heating and uniform temperature. Inner full length glass door for viewing of specimen without disturbing in chamber temperature condition Circulation motor is provided for air circulation & uniformity Trays provided with adjustable runner         Equipment provided with wheel support for easy mobility Hermetically Sealed CFC Free Emerson Compressor For proper air circulation these are fitted with circulating fan to have uniformity of temperature 

Sturdy double walled units Inner wall made of Stainless Steel Outer wall made of Mild Steel powder coated Front Door opening with high grade Door gasket Equipment provided with wheel support for easy mobility High grade  insulation support provided to minimize the heat loss Microprocessor based PID digital temperature controller cum Indicator provided for precise control Details: Long lasting heating elements for rapid heating and uniform temperature. Inner full length glass door for viewing of specimen without disturbing in chamber temperature condition Temperature range 5 ℃ above ambient to 60 ℃.  Accuracy (∓) 2 ℃