Laboratory Equipment Dealers in Jogeshwari, Mumbai

The company is known as one of the famous Pour Point Apparatus Manufacturers and Suppliers, based in Mumbai (India). Our Pour Point Apparatus is acclaimed for its efficient performance and longer working life. The Pour Point Apparatus, offered by us, is designed as per the latest industrial standards. Technical Specifications Horizontal modelTriple walled in constructionInner made of S.S. argon weldedOuter made of M.S. powder coated�CFC� free polyurethane puff insulationSolid state digital temperature controllerRTD � P.T � 100 Sensors�CFC� free eco � friendly cooling systemSelection of single compartment up to � 35 deg C. or multiple compartment up to � 70 deg C4 cups cylindrical copper jacket of 43 mm dia X 115 mm Ht. Test Jar in each compartmentTube length 115 mm � 125 mmBakelite top with concentric lidIndividual solid state digital temp. control in multiple compartments modelsWorking Size 4 Cups single compartment16 cups 4 compartments20 cups 5 compartmentsTemp. Range Up to � 35 deg CUp to � 50 deg CUp to � 70 deg C

The infinite control switch gives infinite control for non-inductive loads up to 15 Amps on 120 or 240 V-AC (cannot be used with an external contactor). It can be turned either to left or right to adjust proper heat from 0-100% wattage with infinite control over the first 50% of total wattage.  Energized continuously in HI position, at other settings it delivers selected input level under control of a simple bimetal timer.  Only 3 mounting holes are necessary to install the INFINITE CONTROL SWITCH in customer supplied box or panel. It is designed for use at ambient temperatures up to 85°C. The model INF turns clockwise or counterclockwise.. A double-line disconnect is provided when the control is in the "Off" position. The permanent magnet provides snap action of contacts. Clean makes and breaks ensure long life of the fine silver contacts. The switch control is ambient compensated. It is designed for operation where ambient temperature does not exceed 85°C. The control contains a bimetal, which regulates the running cycles. This bimetal has a resistance wire wrapped around it, which is connected in parallel with the heating unit being controlled and cycles in unison with the heating element. When the switch is turned to "ON" position, the follower moves out and allows the contacts to close. This completes a circuit through a heating unit being controlled, and also to the resistance wire wrapped around the bimetal. At this time the steel armature is under the influence of the magnetic pull of magnet. As the resistance wire heats the bimetal, the bimetal flexes and forces are built up in it. When the force built up is equal to the magnetic pull of the magnet, the contacts open with a snap action and the steel armature will be pulled away from the magnetic field. This opens the contacts, which will cut off the power of the heating unit being controlled and will also disconnect the power to the bimetal-Resistance wire. As the bimetal cools, it will then flex in the opposite direction and the contacts will start moving closer together. At a certain point the magnetic pull will close with a snap action. This then will permit current to flow throughout the unit once again as the circuit is complete. A second bimetal is employed as an ambient temperature compensator to neutralize the effect of the surrounding temperatures on the control bimetal. These controls are designed to operate in locations where the maximum ambient temperature does not exceed approximately 85°C. The infinite control switch can control any resistive load up to 15 amps. It is possible to obtain a range of inputs to the element and/or load from approximately 5% at low- 100% at high, and infinite settings in between. Features Simplicity of design with no cams or levers to adjust, and no motor to burn out Automatic compensation for line voltage fluctuations up to ± 15% Bimetal acts at settings less than HI to limit electrical input and depress temperature Mechanical Bi-Metal Operation Knob Setting 0 - 100% Output Double Pole, Single Throw (DPST) Snap-Action Positive Break 120 or 240 V(Ac) depending on model 1,800 & 3,600 Watts Cannot be used with a contactor

1. Digital One Channel ECG Machine2. Simultaneous 12 leads acquisition 3. Multiple operation mode (Manual /Auto/Ref. lead)4. LCD to display operation status and wave-form5. The wave-form is displaying synchronously on the LCD with 195 X65 dots6. AC/DC power, Built in rechargeable Ni-MH battery7. High resolution thermal printing array system8. High frequency response reach to 150Hz9. Capable of printing continuous one channel trace and annotations including lead mark and such     parameters as sensitivity, paper speed,   and filter operation status10. High resolution digital inhibits baseline11. One-touch operation able to enhance efficiency and relieve operation   strain.12. Concept of floating input circuit meets IEC safety standard.13. Visual status due to light indicated touch-keys.14. Rechargeable battery supporting more than 50 patient examinations.15. Under the automatic mode, pressing key MODE continuously can keep recording when abnormal lead is       found.16. Safety level corresponds to Class I, Type CF.

We hold expertise in manufacturing and supplying excellent quality Melting Point Apparatus. Melting Point Apparatus, available with us, is widely demanded in laboratories and research centers. Made with premium materials, the Melting Point Apparatus is highly durable. Clients can avail user-friendly Melting Point Apparatus from us at industry leading prices. Attributes Rust resistantAccurately dimensioned Robust Durable

ECG300G can collect 12-lead ECG signal and print waveform by the thermal printing system. It features recording and displaying ECG waveform in AUTOManual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for �Lead off� and �Lack of paper�, multi-language interface, ACDC, selecting any rhythm lead, case database management.

Gas chromatography is used to describe the group of analytical separation techniques used to analyze volatile substances in the gas phase. In gas chromatography, the components of a sample are dissolved in a solvent and vaporized in order to separate the analytes by distributing the sample between two phases: a stationary phase and a mobile phase.

The apparatus is designed to determine the Stefan Boltzman constant. The apparatus consists of a hemisphere fixed on a backlite plate, the outer surface is surrounded by a hot water jacket.Hot water to heat the tank is obtained from a hot water tank with heater fixed above hemisphere. Hot water jacket heats the hemisphere and this heat is transferred to a small copper test disc by radiation. This small test disc can be introduced at the center of hemisphere. A thermocouple is provided at the canter of disc to measure the temperature of disc. With the help of Timer/Stop Clock change in temperature with respect to time can be recorded. The average temperature of hemisphere can be measured by four thermocouples placed on hemisphere. Features Easy understanding of phenomenon of heat transfer by radiation. Determination of Stefan Boltzman constant. Built in timer for temperature measurement at constant intervals.   Specifications Hemisphere made of copper, 200 mm dia, approx. Hot water jacket Test Disc - 20 mm dia., 1.5 mm thick, copper Hot water tank with heater.   Instrumentation & Controls Multy channel Digital Temperature Indicator.   Experimentation Determination of Stefan Boltzman Constant. Study of effect of hemisphere temperature on the constant

We offer the following Laboratory Instruments widely used in Pharmaceutical Industries and Research & Development Laboratories.   Stability Chambers Photostability Chamber B.O.D Cooling Incubator Bacteriological Incubator Plant Growth Chambers Deep Freezer Automatic Ice Flaker Basket Centrifuge Laboratory Centrifuge Vacuum Oven Laboratory Oven Water Jacketed Oven Hot Air Drying Oven Ultrasonic Bath Water Bath Ultrasonic Emulsifier Cryostat Oil Bath Constant Temperature Bath Constant Temperature Bath with Agitator Magnetic Stirrer Bath Double Deck Incubator Shaker Orbit Incubator Shaker UV- Cabinet Muffle Furnace Vertical Dehumidifier   The above equipments are manufactured under stringent quality control norms by well established ISO 9001 Certified companies.

Hull-Cell provides a simple and rapid method of visually testing the quality of Electroplated deposits and of determining the effects of different variables over a wide current density range, temperature, bath composition, addition to the Plating solution or of purification treatment etc., The Apparatus consists of: 1) Perspex Chamber of 267 ml. Capacity. 2) Air Agitation pipe with Air Bubbler. 3) Built - in heater with Thermostat Controls. 4) DC supply by Lab Rectifier. 5) Polished M.S. Brass Test Panels. 6) Anode pieces of Electrolyte. 7) Timer 060 Minutes (Manual)-

We are offering cloud & pour point apparatus. Gmp-gc-103 cloud and pour point apparatus ã�â¢ã¯â¿â½ã�⢠the unit is designed to meet the test method as per above standards. Ã�â¢ã¯â¿â½ã�⢠it is used to carry tests of any petroleum oils as per above test methods. Ã�â¢ã¯â¿â½ã�⢠the bath is triple walled in construction with inner chamber made up of stainless steel and exterior of gi sheet with epoxy powder coated finish with puf insulation in between. Ã�â¢ã¯â¿â½ã�⢠the unit has four compartments four different temperature ranges as follows: 1. 1st compartment: -1ã��ã�â°c to +2ã��ã�â°c. 2. 2nd compartment: -17ã��ã�â°c to +18ã��ã�â°c. 3. 3rd compartment: -35ã��ã�â°c to +32ã��ã�â°c. 4. 4th compartment: -47ã��ã�â°c to +51ã��ã�â°c. Ã�â¢ã¯â¿â½ã�⢠the top surface of unit is of bakelite thick sheet for easy cleaning. Ã�â¢ã¯â¿â½ã�⢠each compartment has 4 test jackets made up of cylindrical flat bottomed glasscopper of 45 mm diameter x 115 mm height. Ã�â¢ã¯â¿â½ã�⢠test jar made up of clear cylindrical glass with flat bottom (30-33.5 mm diameter x 115-125 mm height). Ã�â¢ã¯â¿â½ã�⢠all the four compartments have individual cooling system which includes hermetically sealed kirloskar compressor; 4-digital microprocessor based digital temperature controllers with pt-100 sensors. Ã�â¢ã¯â¿â½ã�⢠power input: 230 v, 50 hz, 1-phase supply.

The distillation column designed to separate a homogenous mixture into its respective components. The highly efficient fractional distillation column can be designed in both standard and customized specifications. Fractional distillation is one of the highly efficient and accurate methods of distillation that has been used in industries since long back.

Based on many years of experience and dedication, Novo Dental has become one of the leading companies in the Global Dental Industry operating from INDIA. We exclusively represent foreign companies like VITA for Ceramic & Porcelain Furnaces, Oraltronics for Sybron Implants & Bone materials, Galloni for Induction Casting Equipment, Saratoga SPA Italy for Clinical & Laboratory Furniture, Columbia Dentoform, USA for Phantom Head & Teaching Aids, GSC Corporation USA for SurgiTel brand of Clinical Magnification loupes & many Internationally reputed companies.

Electronic Laboratory Equipment, Process Control Instrument

NuAire Polypropylene products are constructed from primarily stress relieved, fully seam-welded, and reinforced white polypropylene for high corrosive applications. Polypropylene holds high temperature and tensile strength, possesses excellent chemical resistance to organic solvents and degreasing agents as well as electrolytic attack. The properties of polypropylene are enhanced with anti-oxidizing agents and UV stabilizers to increase strength and improve thermal characteristics. Polypropylene is lightweight, stain resistant, and has a low moisture absorption rate. All this makes NuAire polypropylene products an excellent choice for long-lasting, highly corrosive-resistant, metal-free applications.

This procedure is performed with the use of the best facial apparatus and by one of the best surgeons in the country, Dr Milan Doshi, M.S. MCh. His skill, understanding and experience coupled with the best of modern technologies give you the best safest results.

Hull-Cell provides a simple and rapid method of visually testing the quality of Electroplated deposits and of determining the effects of different variables over a wide current density range, temperature, bath composition, addition to the Plating solution or of purification treatment etc., The Apparatus consists of: 1) Perspex Chamber of 267 ml. Capacity. 2) Air Agitation pipe with Air Bubbler. 3) Built - in heater with Thermostat Controls. 4) DC supply by Lab Rectifier. 5) Polished M.S./ Brass Test Panels. 6) Anode pieces of Electrolyte. 7) Timer 0/60 Minutes (Manual)- (Optional).   Optional: a) Special Hull Cell made of acrylic of 1000 cc. Or 267 ml. without Heater. b) PVC Hull cell use with Chrome Solutions. c) Solid State rectifiers of 8V/5 Amps, 8V/10 Amps, and 12V/10 Amps, ripple free, twin range, two channel outputs etc.,    

ECG Machine Single Channel Digital One Channel ECG Machine, Simultaneous 12 leads acquisition, Multiple operation mode (Manual AutoRef. lead)