Limit Switches Dealers in Mumbai

Rotary Geared Limit Switch GRLS is used to trip motor supply when the moving load reaches the extreme end positions of working zone. The driving motion is transmitted by worm gear through worm shaft. The rotations and movements are transmitted to switches by adjustable cams.

Honeywell Explosion-Proof Limit Switches Series 14CE100: Top Plunger; 1NC 1NO SPDT Snap Action; 3 m Cable Designed for explosive environments. MICRO SWITCH™ 14CE Series has been approved to meet the requirements of the Low Voltage directive and is CE marked.

Lever Limit Switches are used for Heavy duty E.O.T. Cranes, Hoists to prevent over travel of hoisting motion on power and control circuit up to 500 V and 40 Amps. continuous current. The limit switch normally remains closed and cuts off power to stop the motor of the crane. The Lever limit switch operates when it reaches a predetermined position when the lever is moved over a projecting member fixed on the girder. The series limit switch is fitted with four sets of contacts which cuts off two phases of the motor in either direction and is suitable for 500 V supply system. The limit switch contacts are automatically reset when the lever returns to zero position due to spring action.  The base and cover have machined surface to protect against dirt and dust. Supplier of Lever limit Switch and manufacturer of Lever Limit Switch. Pethe Industrial Marketing Company Pvt. Ltd. is the leading manufacturer of Lever Limit Switch in India. Pethe Industrial is the leading supplier of Lever Limit Switch in Mumbai, Maharashtra, Gujarat, Delhi, and all over India.     Salient Features • Body material is made of Aluminium / CI casting. • Enclosure is of IP-44 / IP-55 degree of protection. • Mounting position is Vertical. • Cable entry is of ¾” conduit • Rated voltage is 500 V • Thermal test current is 10 Amps • No. of contacts is 2 / 3 / 4 • Mode of operation is 2 way self resetting. • Contact material is of silver cadmium. • Any other specification can be manufactured upon request.             Application   • All Material Handling and Lifting Equipments   • Hoisting : electric wire rope Hoists and Crabs   • Cross travel and Long travel : EOT / Gantry / Goliath / Derrick Cranes   • Winches and Conveyors   • Rolling mills   • Sugar, Mining, Cement, Textile industries to name a few.   • Brake motors

A Grab Differential limit Switch is Driven by holding and closing winches used in Auxiliary circuit for single lever grabs control. It is used to stop or start the function of the motor at required preset position, irrespective of the height of the grab. It works at the highest & lowest grab position. A key is provided with the switch to release the locking nut to Adjust the cam disc.

We are a Dealer, Supplier of Jigo. We stock and supply running models Jigo Limit Switch, Jigo Proximity Switch, Jigo Proximity Sensor, Jigo Revolving Light, Jigo Industrial Mototr Siren, Jigo Industrial Buzzer, Jigo Temprature Controller, Jigo Timer, Jigo Hour, Jigo SSR. We are supplier in India, Mumbai, Delhi, Ahmadabad, Chennai, Pune, Nashik, Vapi, Aurangabad, Nagpur, Sangli, Satara, Ichalkarnji, Solapur, Kupwad, Kolhapur, Pimpri, Chinchwad, Jalgaon, Silvassa, Surat, Baroda, Morbi, UAE, Indore, Bhopal, Gurgaon, Faridabad, Ghaziabad, Noida, Coimbatore.

Two Way Series Limit Switch is used to prevent over travel or over traverse. The Limit Switch is fitted with 2 sets of contacts which remain normally closed and supply power directly to the 2 phases of Motor in either direction. When the lever is moved over a projecting member fixed at a pre-Determined position on either side of the gantry, the power supply to the motor is cut off. The contacts are automatically reset when the lever returns to `Zero’ position due to spring action. The contacts are rated for 60 Amps at 415 Volts A. C. 50 cycles supply system.The side covers are of cast iron. The top and bottom covers are of sheet steel. The lever is of Mild Steel fitted with M. S. Roller.

Following are the Features of Weight Operated Limit Switch Made from premium quality materialsAdvance technologyUnique design&

DESCRIPTION : Suraj Limit Switches type LSR & LSRS have been specially designed to convert a mechanical motion into an electrical control signal. The mechanical motion is usually in the form of a cam, a machine component or an object moving towards a predetermined position. The cam engages the limit switch roller lever or plunger and in turn makes or breaks an electrical contact inside the switch. This electrical control signal is then used to limit, position or reverse motion travel or to initiate another operating sequence it can also be used for counting, sorting or as a safety device. Typical applications of the suraj limit switch are in the control circuit of solenoids control relays and motor starters (Wthh control the motion of the machine tools) presses, conve ors hoists, elevators and practically every type of motor Driven machines.

The A2B Limit Switch monitors the load block to its relationship with the head of boom.• Users receive an audible hooter and visual warning on the display when anti two block event happens• Electronic circuitry is potted for full humidity protection• Counter weight with the help of wire rope keeps the switch closed until the hook block strikes it.

Flameproof Flasher Light RED GREEN AMBER coloured 8W LED type OR 21 W Filament type light Exd_IIC_IP65 FLPW-1245Flameproof red rotating Beacon Lamp (25W, 24V) with 240 24V OR 110V 24V tranformer Flameproof red rotating Beacon Lamp (25W, 24V) with 240 24V OR 110V 24V tranformer Exd_IIB_IP65 FTL-503Flameproof Traffic Light with Red , Green & Amber LED clusters with 3 glass windows , each 10 W; 12V dc OR 110 230 V ac

We are known to be among the leading Heavy Duty Counter Weight Limit Switches Suppliers in India. The Counter Weight Limit Switch that we offer is used to prevent the over hoist position with weight. It provides counter weight that is lifted with the help of wire rope in order to prevent over hoist motion. Features Aluminium die cast body with IP-55 degree of protection. Applications E.O.T. Cranes Hoist, Lifts, etc.

These limit switches are used to prevent over hoist motion with weight. Counterweight is provided which lifts the wire rope to prevent over hoist operation.

Our variety of Standard Limit Switches is widely applied in electrical devices or circuits. These Standard Limit Switches are appreciated for durability, flawless performance, application dedicated compact design and robust construction. These Standard Limit Switches are available in different voltage options to suit the application requirements. Moreover, we provide bulk quantities of Standard Limit Switches at very affordable prices.

Rotary geared limit switch is used to trip motor supply when the moving loads reach the extreme end positions of working zone. Rotary geared limit switches are suitable for use on reversing drives such as Hoists, winches, rolling mills and various other mechanisms used in steel plants such as coke oven, feeding machinery etc.

Teknic/BCH/Omron limit switch plunger, rollertype, snaptype available