Melting Furnaces Dealers in Mumbai

 TRIPLE walled in construction.  The Inner Chamber is wound by a layer of thick Mineral wool. Gap between the walls filled with initial layer of Asbestos sheet and dense second layer of high insulation low thermal mass Glass wool.  DIGITAL HIGH TEMPERATURE SAFETY CUT-OFFINCORPORATED WITHIN THE UNIT.  ISI Marked Air Heating Elements are provided on the side walls of the chamber.  Superior quality contactor for cutting / restoring power to the heaters are incorporated.  Doors provided with safety cut-out system disables the Motor & the Heaters when doors are opened in operational mode.  Provided with heavy duty S.S. LM-304 ball cages for locking arrangement  Provision for forced air circulation using motorized blower.  Unit works on either 230 V AC, 50 Hz. 1 Phase Supply OR 440 V AC, 50 Hz. 3 Phase Supply. TEMPERATURE RANGE : Ambient + 5°c to + 350°c TEMPERATURE ACCURACY : ± 1 °c

Brass Melting Furnace that are widely used in metallurgy industry and other similar applications. Appreciated by clients for exceptional quality, impeccable performance and long service life, our Brass Melting Furnace has found applications in diverse range of industrial applications. Tested for quality and performance at par with international standards, these Furnaces have set the bar very high as far as competition is concerned. Furthermore, to ensure timely maintenance of product, we also offer onsite service facility for these Brass Furnaces.

This is an excellent quality reliable 1kg capacity bench model metal melting furnace. It is equipped precision digital electronic temperature controller for precise setting of desired temperature. This melter features PU coated heat and weather resistant paint and stainless steel upper body. It attains the maximum temperature of 1150 degree celcius in approximately 11 min. We also have 1/2 kg capacity bench model melting furnace. 

The range of machines for the casting of platinum and its alloys in ingots for wire and sheet ranges from small (capacity crucible 500 g) to medium (1-4 kg) to large (22 kg).Unlike other generators commonly used for this purpose fitted with valves and characterized by a low yield,the Italimpianti Orafi ovens have the unique features in the market to operate at an average frequency with an extremely high efficiency generator that is safer with regard to harmful emissions into the high frequency and which guarantees an energetic mixing of the alloys would otherwise be impossible.    These ovens allow operating temperatures up to 2000 ° C    Possible use of crucibles in different materials such as graphite, clay graphite, silicon carbide, zirconium oxide, zirconium silicate, ceramic etc.    Automatic temperature control with both immersion thermocouple that with optical pyrometer    Automatic Power control regardless of the amount and the type of metal to be melted    computerized diagnostics with alarm on the display monitor can be set in four languages ​​the type of alarm and the recommended steps to fix the problem    Circuit verification Function practicable keyboard for easy remote control driven    casting operation which can be carried out by manual extraction of the crucible, for tilting handwheel or hydraulic tipping.    Auto-off function of the machine and its cooling system after a certain time of non-use of the same (useful at the end of the working day)

Our company has garnered acclaim as the Manufacturer and Supplier of Melting Furnace. The top notch Melting Furnace offered by us is widely preferred for various industrial applications around the country. We check the Melting Furnace on stringent quality parameters to ensure customer satisfaction. We can be counted upon for delivering small or bulk orders of Melting Furnace to customers throughout the country at highly affordable rates.

We pleased to get this opportunities to introduce our firm specialized for undertaking refractory Installation work. We involve in this field since long back time and executed several new projects as well as rebuild/ repairing work in India and abroad with excellent quality of work performance within a stipulated time frame. Our company is registered and developed with all infrastructures i.e. equipments, tools-tackles, organized workmen team. So, we are capable to undertake any quantum of related work in any industry and for your kind information, we have our own EPF code, ESIC code no, GST, PAN and manpower holding with valid passport. So, we can comply all statutory liabilities and fulfill all obligations. Assuring you that we shall always be at the best service in future and all your enquiries will receive our best attention, we request you for your kind consideration for us.

This is an excellent quality reliable 1kg capacity bench model metal melting furnace. It is equipped precision digital electronic temperature controller for precise setting of desired temperature. This melter features PU coated heat and weather resistant paint and stainless steel upper body. It attains the maximum temperature of 1150 degree celcius in approximately 11 min. We also have 1/2 kg capacity bench model melting furnace.  

We manufacture Hot Melt Lamination Machine from best metal and alloy and this Laminating Machine is used for hot melt adhesive coating on various films. Features of Hot Melt Lamination Machine manufactured by Webflex Machines: Designed Hot Melt Coater & laminator of specially hot melt adhesives on flexible subtracts films. This Laminating Machine is compact, sturdy, has modular construction with integrated unwind & rewind units, coating lamination, controls etc. grouped for ease of operation. Unwind units are equipped with mechanical features for EPC & tension. Coating Lamination unit of Hot Melt Laminating Machine consists of : • In feed • Retractable application and breast roll • Laminating Roll • Hot melt pre-melting system applicator

Lloyd Instruments test machines can be used with a range of thermal cabinets and furnaces.  The following models are available: Heating cabinets (40°C to 300°C) Heating and cooling thermal cabinets (-70°C to 300°C) High temperature split furnaces (50°C to 950°C)   Designed for testing samples under pre-defined temperature conditions.    

Wesman has a full range of Aluminium Melting and Holding Furnaces up to a capacity of 20 MT to offer to the aluminium industries for foundry cast house and recycling operation. These furnaces will be reverberatory type tilting or stationary. Furnaces with small dry hearth can be offered for clean automotive scraps. Aluminium scraps are charged through side door with the help of charging machine or manually and after melting, dross removal and fluxing molten metal can also be discharged through tapping spout. Hydraulically operated tilting arrangement is provided to suit the application. The furnaces are fired with Wesman�s high efficiency burners supported by a full complement of combustion system consisting of combustion fan, atomizing fan, oil heating and pumping systems andor gas trains. In addition auto ignition, flame failure safety and complete control systems are offered. Practically any type of liquid or gaseous fuel can be used viz. Furnace Oil, Light Diesel Oil, LPG, Natural Gas singly or a combination of any oil or gas in case of dual fired furnaces.

Features :-     P.I.P. Temperature Controller     Ampere Meter Volt men output / input     Counter weight door /or simple higher type door     Fitting stand arrangement or trolley type as per requirement    

The Wrap around Hotmelt labeling machine is a high speed system ideal for round bottles. It is matched with R.F.C machine and the conveyor connecting both is synchronized to ensure smooth flow of bottles. A stainless steel star wheel or feed worm in case of high speed machines will take the bottle and place in front of the label application drum. The label is delivered by the sensor controls whose response time and control speed frequency of the electronic print mark registration system is very fast, and it works 20 times faster than any other Indian Hotmelt label applicator. The bottle is rolled over the label and on completion of label application, bottle will be discharged on the out feed conveyor. The synchronizing/correction speed is 350 MHZ and response time is 120 micro-seconds. For lower capacity machines to save cost we have developed our own Hotmelt unit, but for higher speed machines we use a Nordson, (U.S.A) system. All electronics used in our system are from leading suppliers such as Siemens, LG, Danfoss who have worldwide service support. The electronic registration system is servo controlled and the fly cutter is synchronized to it to ensure that label is cut with ±1 mm of the print mark. The label cutter is PLC controlled with a hardened tool steel blade. There is an alarm when the label reel starts to run low. If there is no bottle on conveyor, the label will not be delivered to the drum and if there is no label on the drum no adhesive is applied  

We haved specialized in sphere of MFG. a wide range of High Temp. Oven that are triple walled & fabricated with heavy gauge M.S.& S.S sheet further the inner surface can also made in M.S. or S.S.   Technical specifications • Ovens are triple walled. • Inner chamber made of either M.S. or S.S.304 • Gap between the two walled filled with ceramic insulation to avoid heat of loses with insulation of 150 mm. • Heating Element are made of special type Air heater of S.S. ‘U’ Type tublar heater. • With special type of wirring connection from out side body. • Supplied with air draft motorized blower to circulate uniform temp. Thought out chamber temp. Range 50 ˚C to 400 ˚C with accuracy of ± 2 ˚C controlled by digital temp. Controller cum indicator.

Our Beta and Ideal series with or without tilting induction furnaces designed by industry experts to achieve the best metallurgical quality on precious metal alloys upto 1500c melting temperature as required by special alloys. Induction furnaces with motorized tilting of the crucible with adjustable speed, conceived for many uses like melting scraps for refining, melting ashes for recovery . graining for alloys productions, etc. Advantages: Silent working. High-performing medium frequency induction generators. Stainless steel frame. Perfect homogeneity of the alloys thanks to our Pulse Mixing System .Quick melting. Easy control of the working parameters by PLC and touch screen video, temperature control by thermocouple, optional by optical detector. Monitor display for self-diagnosing and possible alarms with buzzer. Possibility to save the working recipes and parameters. Programmed maintenance with display warning. Protective gas injector to prevent metal oxidation. Graphite crucible with ceramic casing. Tongs to handle the extractable crucible. Specifications: Model BETA 2 BETA 3 BETA 5 BETA 10 BETA 12 Power 3,5 kW 4,5 kW 5,5 kW 10 kW 12 kW Capacity of Graphite Crucible 125 cm3 2,5 Kg - Au/999 2 Kg - Au/750 1,3 Kg - Ag/925 205 cm3 4 Kg - Au/999 3 Kg - Au/750 2 Kg - Ag/925 380 cm3 6 Kg - Au/999 4,7 Kg - Au/750 3,2 Kg - Ag/925 800 cm3 12 Kg - Au/999 10 Kg - Au/750 6,4 Kg - Ag/925 980 cm3 14 Kg - Au/999 12 Kg - Au/750 7,5 Kg - Ag/925 Max Temp 1300 C 1300 C 1300 C 1300 C 1300 C Datasheets to Save 100 100 100 100 100 Voltage 230 V 50/60 Hz 1 ph 230/400 V 50/60 Hz 3 ph 230/400 V 50/60 Hz 3 ph 230/400 V 50/60 Hz 3 ph 230/400 V 50/60 Hz 3 ph Dimensions 45x55x29 h cm 45x55x29 h cm 51x51x88 h cm 51x51x88 h cm 60x60x100 h cm Weight 44 Kg 46 Kg 110 Kg 150 Kg 172 Kg