Monel Sheet Dealers in Mumbai

High Performance Alloys stocks and produces Monel 400 in this grade in the following forms: Bar, square bar, wire spool, wire cuts, loose coil, sheet/plate, tube, pipe, flange. Monel 400 is a Nickel-Copper alloy, resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400 is a nickel-copper alloy with excellent corrosion resistance in a wide variety of media. Monel 400 is characterized by good general corrosion resistance, good weldability and moderate to high strength. The alloy has been used in a variety of applications. It has excellent resistance to rapidly flowing brackish water or seawater. It is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. The alloy is slightly magnetic at room temperature. Monel 400 is widely used in the chemical, oil and marine industries. NG Industries is a renowned Manufacturer, Exporter and Supplier of Monel 400 Sheets & Monel K500 Sheets in India and abroad. Monel 400 Plates (UNS N04400) is based on copper (20-29 %) and nickels (65-70 %) and as well contains manganese and iron (5 %) along with other compounds. Monel K500 Plates (UNS N05500) are widely used in different application industries like Chemicals, Fats & Fertilizers, Ship Builders, Sugar Mills & Distilleries, Paper Industries, Cement Industries, and so on. These Alloy 400 Sheets can also be supplied in made to order length sizes and as well machined or fabricated to meet your requirements in piping system. The clients can avail the Alloy K500 Sheets from us in varied specifications to cater to the diverse requirements. CHARACTERISTICS :   Corrosion resistance in an extensive range of marine and chemical environments. From pure water to nonoxidizing mineral acids, salts and alkalis. This alloy is more resistant to nickel under reducing conditions and more resistant than copper under oxidizing conditions, it does show however better resistance to reducing media than oxidizing. Good mechanical properties from subzero temperatures up to about 480C. Good resistance to sulfuric and hydrofluoric acids. Aeration however will result in increased corrosion rates. May be used to handle hydrochloric acid, but the presence of oxidizing salts will greatly accelerate corrosive attack. Resistance to neutral, alkaline and acid salts is shown, but poor resistance is found with oxidizing acid salts such as ferric chloride. Excellent resistance to chloride ion stress corrosion cracking.

Our range of monel sheets & plates are highly resistant to atmospheric corrosion, salt water and various acid & alkaline solutions. These sheets find diverse applications in different industries such in heat exchangers, brine heaters, cladding for the upper areas of oil refinery crude columns, etc. We can offer monel sheets and plates in different sizes with thickness varying from 0.1 mm to 150 mm. Specifications Grades: Monel 400 (UNS No. N04400) Monel 500 (UNS No. N05500)

Sheet and Plates Grades : Monel 400, Monel k500Type: Seamless / Erw / Welded/ FabricatedForm: Round, Square, Rectangular, Hydraulic etc.Length: Single Random, Double Random & Cut LengthEnd: Plain End, Beveled End, ThreadedThe salient features are as follows : Hot Dipped Galvanizing Epoxy & Fbe Coating Electro Polish Draw & Expansion

ASTM B127 Monel Alloy 400 Sheet, Plate Suppliers In India. Monel 400 Shim Sheet, Monel 400 Cold Rolled Sheets, Monel Alloy 400 Hot Rolled Plates,Exporter. Jainex Steel & Metal offers a widespread range of Alloy 400 Sheets Plates and Coils, where it is the responsibility of our group members to inspect these products for any form of finishing defect in that way achieving utmost serenity of the clienteles. Monel 400 Strip Coils is used for hydrocarbon and chemical processing equipment, marine engineering, shafts, fittings, valves, pumps, fasteners, and heat exchangers. For the reason that of its excellent corrosion resistance, Monel 400 Slim Coils is used in chemical plant machinery.Monel 400 Coils shows first-rate corrosion resistance and soaring strength in a variety of alkaline and acidic atmospheres and it's particularly appropriate for reducing environments. The machinability of Monel 400 Plates (UNS N04400) is hard as it works-toughens throughout machining. Meanwhile, these Monel 400 Circles are also being offered in different sizes and shapes to our customers.

Our entire array of products is sternly manufactured using certified array of raw materials. These inputs are sourced only from trustworthy vendors present in the market. To avoid any type of mechanical and biochemical harms, we pack our products in high-grade packing items that are sturdy as well. Moreover, we provide product details on it as well.

Monel Sheet are are generally stronger than pure nickel. They are resistant to many corrosion causing agents, and also sea water. the degrading quality of goods and services affects no one but the customers. They are often trapped in the midst of dubious practices. They end up paying high prices (due to supplier commission) for the services they never receive. Many times, the raw materials are unavailable and even if they get them, they are inappropriate in terms of hardness levels and surface finish.

We are exporters, suppliers, and stockiest of monel sheet that are using high quality raw materials in india. We also offer a wide range of monel products such as sheet, pipe, rod, tube, bright bar, square, wire, etc. As per clients’ requirement. this monel sheet is manufactured in national & international standards. These are widely used in various application industry like chemical, fats, and fertilizers, sugar mills, & distilleries, cement industries, ship builders, paper industries etc. We are offering these sheets in below mentioned technical specification.

We are a leading manufacturer, exporter and supplier of monel 405 sheets & plates in mumbai (india). The uns n04405 monel 405 sheets & plates, offered by us, are made from quality raw materials like monel r-405 ®, which is very similar to monel r405 ® except for its greater sulfur content. The monel 405 sheets & plates are known for their corrosion resistance and good adaptability to the different machines. applications of monel 405 sheets & plates dairy and food processing industryfurnituretools industrylaundry machine manufacturing unitsmail chutesroofing and flashingchemical, oil and marine industriesfood preparation appliancesinstalled as a sheet roofing membranegrocery coolerscountertops and sinksductwork, gutters and downspoutselevator fittings, lighting fixtures, and skylights

The Monel Sheets are famous all over the globe for their smooth finish, dimensional accuracy, high tensile strength and long life. We are a prestigious name as Manufacturer and Supplier of Monel Sheets in Maharashtra, India. Our team of professionals who are enriched with the knowledge make the Sheets in sync with the stated international quality standards. Place small order or bulk one, we will deliver them all well in time.

We are one of the leading exporter & stockist of stainless steel, inconel, monel, hastelloy, titanium, cupro nickle, duplex & super duplex stainless steel ferrous and non ferrous metals such as pipe and SS pipe fitting. Engaged in exporting of steel tubes, steel pips, stainless steel pipes, stainless steel tubes etc. We are a professionally managed company started by a team of dynamic young entrepreneurs. We are in the business of exporting and importing of forged pipe fittings, nickel alloy pipe fittings, ferrous & non-ferrous metals products used in various core industries.

Siddhagiri Metals and Tubes is India’s leading manufacturers ,Importers, Stockholders, Exporters, Distributors, Traders and Wholesalers of monel sheet suppliers in india . Monel Shim Sheets ,monel strip sheet ,Monel Sheets,Monel Alloy Sheets,Monel Hot Rolled (HR) Sheets,monel hot rolled coil ,monel diamond sheets, World’s Leading suppliers : Siddhagiri Metals and Tubes , Japanese Origin, European Origin, Korean Origin, US Origin, Russian Origin, Ukraine Origin monel sheet suppliers United States | monel sheet suppliers United Arab Emirates | monel sheet suppliers Canada | monel sheet suppliers Pakistan | monel sheet suppliers Spain | monel sheet suppliers France | monel sheet suppliers United Kingdom | monel sheet suppliers Indonesia | monel sheet suppliers Iran | monel sheet suppliers Kuwait | monel sheet suppliers Mexico | monel sheet suppliers Malaysia | monel sheet suppliers Nigeria | monel sheet suppliers Singapore | monel sheet suppliers Saudi Arabia | monel sheet suppliers Netherlands | monel sheet suppliers Brazil | monel sheet suppliers Colombia | monel sheet suppliers Egypt | monel sheet suppliers Iraq | monel sheet suppliers Sri Lanka | monel sheet suppliers Russia | monel sheet suppliers Vietnam | monel sheet suppliers South Africa | | monel sheet suppliers Nigeria | Turkey | monel sheet suppliers Bangladesh | monel sheet suppliers Italy | monel sheet suppliers Japan | monel sheet suppliers Thailand | monel sheet suppliers Hong Kong | monel sheet suppliers Switzerland | monel sheet suppliers New Zealand| monel sheet suppliers Mozambique|

Nandishwar Steel is a name that is enlisted amongst the prominent monel sheets suppliers in Mumbai. We are appreciated amidst the celebrated names in the sphere of providing exclusive range that includes Monel Sheets. We are acknowledged for meeting the urgent requirements of the clients even on short notice as we are supported by capacious warehouse and streamlined inventory management system.   Monel UNS N04400 / N05500 Sheets & Plates, Monel 400 Sheets, Plates & Coils, Monel K500 Sheets, Plates & Coils SupplierMonel B 366 / SB 366 Monel DIN 2.4360 / 2.4375 Sheets, Plates & Coils SupplierNandishwar Steel is a Manufacturer, Exporter and Supplier of all Stainless Steel, Ferrous & Non-Ferrous Metals and Industrial Raw Materials in India. We offer a wide range of Monel 400, Monel K500 Sheets, Plates and Coils as per clients requirements. Monel is based on copper (20-29%) and nickels (65-70%) and as well contains manganese and iron (5%) along woth other compounds. They are widely used in different application industries like Chemicals, Fats & Fertilizers, Ship Builders, Sugar Mills & Distilleries, Paper Industries, Cement Industries, and so on.Monel 400, Monel K500 Sheets, Plates and Coils* can also be supplied in made to order length sizes and as well machined or fabricated to meet your requirements in piping system.Specifications: Grade: Monel 400 (UNS No. N04400) / Monel K-500 Standards: ASTM / ASME Designation : B 366 / SB 366