Incubators Dealers in Borivali West, Mumbai

• Type: Shaking Incubators
• Material: Metal, Mild Steel, Stainless Steel
• Certification: ISI Certified
• Application: Industrial Use
• Color: White, Off White
• Voltage: 110V, 220V
• Condition: New
• Frequency: 50Hz, 60Hz
• Temperature: 0-50Deg C, 50-100Deg C
• Volume: 100-150ltr, 150-200ltr, 200-250ltr, 300-350ltr
• Automation Grade: Fully Automatic, Semi Automatic
• No of Shelves: 2 Shelves
• Country of Origin: India
• Brand Name: KUMAR
• Power: 220

Our company has specialized in the sphere of fabricating a wide range of Memmert Incubators that is sturdy in construction & durable. We used high grade raw materials that is procured from the renowned vendors of the country for the mgf. process for ensuring high efficiency of the memmert incubators. Available in different sizes, we can also customize these incubator as per the requirement of Clients.   Specifications: • Triple walled Unit. • Inner chamber made of S.S.304 • Outer chamber of Mild Steel with Powder coating. • Gap Between the two walls filled with glass wool insulation to avoid heat loses of 65 mm • Heating element Are Made of high grade chrome plated nichrome wire. • Heaters are placed ate the right & left side of the inner chamber • Enable with thermostat control the Temperature Temp. Range 5 ˚C above ambient to 60 ˚C accuracy ±2 ˚C • Air Ventilation is placed on top of both sides to remove heat gases  and fumes. • Control Switch & pilot lamps are fitted on front panel • Supplied with G.I. Wire mesh Jali

• Material: Aluminum
• Certification: ISO Certified
• Application: Industrial Use
• Voltage: 110V
• Supply: 220/240 V 50 Hz A.C.
• Control: By Thermostat ±2ºC.

Double wall M.S. Contruction with high quality dense insulation to prevent heat loss.Outer door fitted with magnetic gasket and lock ,Full length inner glass door.Finished with attractive Double colour epoxy coated finish paint.Specially designed low voltage heaters ensure long life.User friendly adjustable shelvesShelves supplied with the unit are of Galvanised wiremesh

Our company has specialized in the sphere of fabricating a wide range of Memmert Incubators that is sturdy in construction & durable. We used high grade raw materials that is procured from the renowned vendors of the country for the mgf. process for ensuring high efficiency of the memmert incubators. Available in different sizes, we can also customize these incubators as per the requirement of Clients. Technical Specifications: Triple walled Unit Inner chamber made of S.S.304 Outer chamber of Mild Steel with Powder coating Gap Between the two walls filled with glass wool insulation to avoid heat loses of 65 mm Heating element Are Made of high grade chrome plated nichrome wire Heaters are placed ate the right & left side of the inner chamber Enable with thermostat control the Temperature Temp. Range 5 C above ambient to 60 C accuracy ±2 C Air Ventilation is placed on top of both sides to remove heat gases and fumes Control Switch & pilot lamps are fitted on front panel Supplied with G.I. Wire mesh Jali

KBI Range of Incubators allow efficient and economical general incubation work and temperature testing according to international Test Standards. They are outstanding in precision and reliability as well as in performance and styling.   Construction and mode of operation: • Cabinet, double walled, exterior finished in powder coating epoxy paint. Door, right hand hinge, with magnetic gasket and lock, full length plexi-glass inner door.   • Insulated with the most efficient insulation available today, provided for improved refrigeration performance.   • Forced air circulation through built-in large size fan via baffle plates, gives constant positive air flow throughout the chamber, as well as fast adjustment of the specimen to circulating air temperature.   • Air Tempering is carried out by a finned heater and finned tube heat exchanger cooled by hermetic compressor.   • Control Panel carrying all the controls, indicators, switches, heat energy regulator etc. Is placed on the top of the cabinet.   Controlling and Regulating: • Digital Display of actual value and set value with 0.1ºC Resolution allows exact control of temperature and repeatable setting of the same temperature value. The temperature in the chamber is measured with a high precision PT - 100 sensor.   Controller: • The fully electronic temperature controller with two point sensors automatically select cooling or heating. It gives very high precision and an excellent response due to the built-in feed back.   KBL Range of B.O.D. Incubators have additionally built-in illumination system comprising four 2 ft. Fluorescent tube lights housed vertically in the door and 24 hrs. ON/OFF cyclic timer for illumination control. Additional Features: • Automatic chamber light on opening of the door   Performance Specifications:  • Controllable range of Incubator temperature ; 5 to 60ºC • Accuracy of temperature control :±0.5ºC • Temperature variation throughout the cabinet : ±0.5ºC     Performance Specifications:  • 230V , single phase, 50 Hz.   OPTIONAL: • Illumination system using flourescent tube lights for KBI models. • Programmable 24 Hrs. On/Off cyclic Timer for illumination control for KBI Models. • Electrical point inside the chamber. • Port holes for glass inlet. • Luxmeter.

We are one of the most reputed Manufacturers, Exporters and Suppliers of BOD Incubator in the market. Primarily designed to meet the requirement of Biochemical Oxygen Demand Test, the BOD Incubator can be used in various applications like Incubation, Serum Studies, Study of Enzymatic Digestion Processes, Tissue Culture, Preservation of Vaccines, Long Term Sample Immunological work, etc. The BOD Incubator that we provide is developed and designed by using the best quality components and parts. Our BOD Incubator is well appreciated for its excellent control and smooth functioning. Calibration & Validation We will provide the calibration certificate of the controller with trace ability of the Indian government�s approved agency. The company also does the validation of the chamber i.e. recording the temperature at different places in the chamber confirming uniform temperature throughout the chamber & no developing of hot & cold zones in the chamber. Construction The Inner chamber of the cabinet will be made up of Stainless steel & the outer wall will be of Mild steel sheet that is insulated between the two walls of 75-mm thick special quality Glass wool pad to prevent thermal losses. A self-cooled air circulation fan will be provided to maintain the uniform Temperature throughout the Chamber. Door construction A flush fitting insulated door has leak proof Magnetic Gasket with Lock & Key wears as Full-length inner door of acrylic, which allows a clear view of samples without loss of chamber condition during operation. Trays : Adjustable Perforated removable Stainless Steel shelves are provided along with the unit Circulation : Forced air circulation throughout the chamber for uniformity & accuracy Heating : Long Lasting stainless steel tubular heater is been used as heating element Heating element of Nichrome wire placed in air path duly insulated from body. Cooling A hermetically sealed compressor with evaporating coil & fan-cooled condenser provides efficient cooling in the chamber. The compressor is safeguard with time delay circuit & overload protection. The cooling system is placed at the bottom of the working chamber for easy servicing & for low noise vibration. Temperature sensing device : Temperature of the chamber can be sensed by Pt � 100 A Class sensors Control Panel The control panel will be on the top of the unit for easy setting of the temperature it will consist of P.I.D Based Digital Temperature Controller with Line, Mains, Cooling, Heating L.E.D. Bulbs & Push On / Off Button for inner chamber Illumination Temperature range : - +5o C to +50oC Accuracy : - + 1o C

• Application: Storing Blood Platelets
• Brand Name: TRUFROST
• Model: MDC 10
• Sterility: UV
• Size: 432 x 462 x 728mm
• Number of Shelves: 10 Shelves
• Exterior Dimensions (W*D*H/mm): 522*600*1300
• Temp. Range (°C): 20

Key Features: High accuracy sensor Microprocessor control with inner temperature controlled at 22°C +/-2°C Efficient refrigeration system with controlled fan and forced cycle mechanism ensures temperature consistency inside the cabinet Large digital display for easier observation Disinfection by UV light that shuts off automatically when door is opened to prevent harm to human body Double insulated glass door makes observation easy High quality oscillation slide rail for longevity as well as low noise Safety Control System: Alarm mode monitors ambient temperature and system state to ensure safety and reliability of storage conditions. High/Low temperature alarm, thermostat malfunction alarm, power failure alarm in 72 hours, battery back-up malfunction alarm and door ajar alarm Audio and visual alarm

• Type: Lab Incubator
• Material: Aluminum, Metal, Mild Steel, Stainless Steel
• Application: Medical Use
• Color: Black, Blue, Green, Purple, White
• Voltage: 110V, 220V, 380V
• Condition: New, Used

We are the main supplier of this product.

• Country of Origin: India
• Type: Bod Incubator
• Color: Silver

These are the medium to large-sized versions of BOD Incubators with similar application of growth & storage of bacterial cultures, gentle incubation & conditioning and Media Preparation. Walk-In Incubators are ideal for incubation of micro-organisms, eggs, etc to cater to mass-scale production of vaccines & other drug products.

• Precise Control Accuracy: ± 0.5° C.
• Best uniformity of Temperature: ± 1.0° C.
• Models: NEPL 108RTSSI,NEPL 112RTSSI ,NEPL 116RTSSI,NEPL 121RTSSI etc.

Suitable for Incubations at High and as well as Low Temperature Precise accuracy and uniformity of Temperature by convection Technology Double walled interior and exterior made of S.S. 304 with matt finish insulated with �CFC� free poly urethane foam PUF insulation. S.S. Perforated Trays with adjustable Runners. Full Length Inner Glass Doors with Lockable Outer Metal Door. Poly fiber castor wheels provided for easy mobility. The unit is provided with safety devices for temperature over / under shoot in case of malfunction. Audio and visual alarms are generated for temperature variation. IQ, OQ, & PQ Protocols. Calibration & Validation will be provided as per the protocol. Power supply 230 V ; 50 Hz.

The company is a Manufacturer, Supplier and Exporter of Laboratory Incubator. Laboratory Incubator, supplied by us, is known to offer high performance till long period of time. Laboratory Incubator is very effective in doing research and laboratory work. This Laboratory Incubator is able to store various incubation organisms like Bacteria, Pathogens, Fungi, etc. We manufacture Laboratory Incubator as per GMP, GLP requirement. The incubator of machine is made up of perforated trays, alarm systems, safety devices and accurate temperature controls. Standard Equipment Digital display microprocessor based temperature controllerIQ, OQ and PQ protocolsCalibration certificateInner full length glass doorInterior made of stainless steel and exterior made of either Powder coated steel or stainless steelMesh type traysAlarms for temperature deviationSafety devices for temperature overshoots

• Type: Bacteriological Incubator
• Material: Metal, Mild Steel, Stainless Steel
• Application: Industrial Use, Medical Use
• Color: Blue, Green, Purple, White
• Voltage: 220V
• Condition: New, Used
• Frequency: 50Hz
• Temperature: 0-50Deg C, 50-100Deg C
• Automation Grade: Fully Automatic, Semi Automatic
• No of Shelves: 2 Shelves, 3 Shelves

We offer biochemical oxygen demand incubator.we deals in manufacturing, supplying and exporting of biochemical oxygen demand incubator. Biochemical oxygen demand incubator is fabricated in a double decker type construction.

Deep Freezers, Humidity Chambers

Photostability Chamber, Ultra Low Temperature Freezer, Ultra Deep Freezer

Electrosurgical Equipment, Blood collection mixer, biomedical equipment

Ovens, photopolymer plates, Vacuum Ovens

FORCED CONVECTION OVEN, Crucible Furnace, Humidifier, Vacuum Pump Oil Sealed

Anesthesia Machine, blood bank fridge, medical instrument