Incubators Dealers in Delhi

Model:  AGCI-151 (Deluxe Model) Features: Air-jacketed and direct heating type. Efficient humidity system. Programmable CO2 sensor “AUTO-START”. MICROPROCESSOR BASED PID TEMPERATURE INDICATOR CUM CONTROLLER for controlling the temperature from 5°C above ambient to 50°C with an accuracy of +0.1°C. Alarm for High/Low Temperature & CO2. Unique Door Heating to avoid Condensation. CO2 Concentration setting range : 0 to 20% with deviation +0.1%. Recovery time of CO2 concentration to 5% @37°C : Less than 3 minutes. CO2 concentration sensor : TCD (Thermal Conductivity Detector). Humidity : ≥95%. Water Reservoir Volume : 3 Ltrs. Interior Structure : 3 Standard shelves with a inner glass door. Supplied complete with CO2 gas cylinder (Cap: 9Ltrs) with regulator and all complete pipes. Power supply: 220V + 10%/50Hz. Interior Volume : 151 Ltrs  

We are offering orbital shaking incubator, construction: our incubator shakers are double walled convection heated and cooled units. Outer body of our incubator shakers are constructed out of thick pcrc sheet duly elegantly powder coated. The inner chamber is made of heavy gauge stainless steel sheet of ss-304 grade. The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our incubator shakers. The unit is provided with two doors, the inner door is made of thick plexi glassfloat glass, to view the specimens without disturbing the temperature of the chamber. This door is provided with magnetic door closer.the outer door is made of mild steel sheet lined with stainless steel from inside. This door is provided with lock and key arrangement. The unit is mounted on a sturdy steel frame and provided with castor wheels for easy movement inside the laboratory. The unit is provided with twothree stainless steel shelves. The triple walled back of our incubator shakers are provided with two air circulation fans for uniform maintenance of the temperature throughout the chamber. Shaking system: the efficient and diligent shaking system of our incubator shaker has a orbital shaking movement which is powered by a reliable heavy duty dc motor. Shaking speed: the variable shaking speed incubator shaker is between 20 rpm to 225 rpm. speed control: the orbital shaking in our orbital shakers is controlled by a dc drive which in turn is controlled through speed controller cum rpm indicator with great accuracy.

Better quality S. S. 304 grade inner chamber & Outer S. Steel chamber with Plexi glass inner door (Can see through Plexi Glass Cover), Universal platform having interchangeable clamps of assorated size for difference cap. of Flask i.e. Refrigerated Model with 24 Hrs. Timer Digital UV Light 2 Illumination (on customer request).

Abdos LED digital dry bath is ideal for molecular biology, histology, clinical, environmental and industrial laboratories, including melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture and media tests, coagulation tests, blood-urea-nitrogen determinations and in-situ hybridizations. In –built over temperature protection. Various optional blocks are available for best performance. Protection class according to DIN EN 60529.

Under precious guidance of our skilled professionals, we are engaged in offering a wide range of Shaker Incubator. This incubator is widely used in hospitals and laboratories for maintaining temperature, humidity and other condition at certain level. Our offered incubator is accurately designed by using quality proven components and modular techniques in compliance with set industry standards.

INTRODUCTION  Once blood is collected from a donor the blood is to be stored safely to preserve the platelets present in it. Thereby, the Platelet Incubator-cum-Agitator (PIA) is availed to the hospitals and blood banks so as to preserve the blood without contaminating it. Contamination may cause differ in result and hence, wrong medication. Platelet incubator is a strong cabinet supported by compounded wheel for its mobility. The device saves the plasma bags inside and provides the heat required for the preservation of blood platelets. The temperature can be accustomed as per necessity. Ramedico Platelet Incubator-cum-Agitator is configured with double-layered cabinet which is capable of blocking wind and humidity inside it. Inner surface is placed with stainless steel and entire body is mounted on castor wheels. Temperature and voltage can be regulated automatically (pre-set value) or manually. Volume of Ramedico incubator varies as per need of pathologist akin PIA60, which is capable of accumulating 60 bags and PIA120, which is capable of accumulating 120 bags per cycle. Adding to these is readiness of inbuilt stabilizer which maintains its voltage spontaneously and battery is placed to supply power back-up in case of emergency. Advantages of Ramedico PlA :-   .  Comparatively low-priced   .  Promised longevity   .  Easily movable Provides approx. 72-75 rotation per minute agitation Ramedico Incubator-cum-Agitator is carefully designed to safeguard users while the machine is in process. For the latter an automatic stop system is intended to stopover the machine when the door is opened intentionally or by mistake.

We are offering bod incubator.innovative bod (bio oxygen demand) incubators are designed primarily to meet requirements of bio chemical oxygen demand test in various fields like medical, vaccines, culture of bacteria, seed germination, agricultural, industrial etc. bod incubators are also called low temperature incubators and are one of most important lab equipment in many hospitals, research centers and other pharmaceutical labs. Bod incubators are specially designed for a variety of incubation and testing applications. bod incubators construction triple walled fitted with cooling and heating systems, insulation of 75 mm thick glass wool, inside walls are made of stainless steel and outside of stainless steel or mild steel finished with attractive enamel paint. Bod incubators are mounted on castor wheels. Full view inner glass or with perspex door. Temperature range from 5 to 50° c, sensitivity and temperature uniformity upto (+- 0.5 c to 1° c). Forced air circulation ensures uniformity of the temperature by two separate motors, one for cooling and the other for heating. controlled by digital temperature controller cum indicator. Suitable to work on 220 volts a/ c.

Convection Incubators find use where living organisms multiplication, growth rate or generation of microbiological cultures are concerned Bio Gene is the right choice due its precise temperature Positioning. Thus reproducing test results. For food industries critical of germ count or determination of Biochemical oxygen on Demand Bacteria, fungi, yeast, virus Bio Gene Natural conversation Incubator gives optimal results as it regulates the Drying process.

Owing to our countable experience of the industry, we have been able to offer a range of bod incubators. These product are formulated under the strict vigilance of the professionals. The offered product finds its use in various technical applications in different industrial sectors and these products are available at the most comprehensive range of price. features: high performance seamless finish precisely-engineered cost-effective optimality application areas: metallurgical labs pharmaceuticals medical institutes food industries technical parameters: temperature range -5°cto50°c temperature stability ± 1"c or better power consumption 220/230vac ± 10phz compressor kirloskar / tecumseh/ standardised model as per size requirement specifications: model se bod 01 se bod 01 a se bod 01 b se bod 01 c capacity (litre) 112 ltrs. 171 ltrs. 280 ltrs. 336 ltrs. interior (mm) 455 x 610 x 410 505x830x415 570x875x550 900 x g50 x 550 4cuft. 6 cuft. . 10 cuft. 12 cuft. heater "w" wattage 25gw 250w 250w 500w shelves 2_ 3 3 3

The CO2 incubator is the ideal instruments for immunology, oncology genetics and bio engineering. It is widely applicable for research and production of microorganism, agricultural science pharmacology. FEATURES • Air jacker heater (water jacket heater can be choosed). •Colorful touch screen controller, temperature, CO2 concentration, humidity (option) and other parameters show visual. • The curves of temperature, humidity and CO2 concentration can be viewed.HEPA filter (option). • With 90°C moist heat decontamination function.(UV disinfection is optional). • IR sensor, real-time real measured of CO2 concentration. • In forced convection mode, the power of fan is adjustable. • It has outer door heating function to prevent produce condensation on theglass door. • Independent temperature-limiting protection system to avoid temperature out of control if temperature control system failure. • Professional CO2 pressure relief valve with 2 stage control and stablepressure.

Forced convection system ensures good mixing, strong dispersion and maintains higher temperature uniformity inside the chamber. Most ideal for various experiments in microbiology, Institutes, industries, R & D labs etc. Synthetic door gasket made of neoprene on the double walled door. User oriented design of shelves makes you adjust each space of shelves without difficulty.Adjustable two ventilation slides control inner air/ vapour circulation. Beaded heating elements are placed in ribs, at bottom and sides for uniform heat distribution.     CONSTRUCTIONAL FEATURES   Outer body made up of mild steel sheet duly powder coated. Inner chamber and perforated trays made of stainless steel (SS-304). Space between inner chamber and outer wall is filled with high grade mineral wool for minimal heat dissipation. Bigger sized units mounted on caster wheels for easy portability. Door fitted with heavy duty hinges and door handle ensuring there are no leakages through the door gasket. Beaded heating elements are placed in ribs, at bottom and sides, for uniform heat distribution. Synthetic door gasket made of neoprene rubber is fitted to all "MAC" units instead of asbestos. Air ventilators are also provided on the sides of the unit. To work on 220/230V AV, 50/60 Hz supply

JINDAL floor model incubator shakers are designed for day-to-day laboratory routine work. Construction: The external body of the incubator is made of galvanized steel sheet with baked on finish having powder coating & the internal chamber is made of high-grade polished corrosion resistant double pane insulated stainless steel. The chamber is insulated with high density Polyurethane insulation to prevent thermal losses. The complete shaker is mounted on a heavy angle frame structure on all the sides & consists of castor wheels cum jack system for easy movement. A front opening door with glass window facilitates the inspection of samples without disturbing the temperature. The door consists of attachable light shielding plate for safety. The unit is provided with 02 Nos. removable stainless steel shelves. Forced air circulation inside ensures uniform temperature distribution throughout the chamber. The shaker consists of triple eccentric drive mechanism with 25mm stroke displacement. A brushless induction motor along with a feed back signal provides accurate speed.Heating is done by finned heaters (250 Watts) & are placed in the air flow duct.The temperature range is from Ambient +5DegC to 80DegC controlled by a digital microprocessor temperature indicator cum controller within an accuracy & stability of ±0.5DegC. The heaters linked to the microprocessor run on the PID function. The temperature can be set in the inc./dec. of 0.1DegC. The shaking speed can be adjusted from 10 to 400RPM ±1RPM within increments of 1rpm & is controlled by the precise microprocessor controller. A bright digital LCD 7” multicolor touch screen displays & monitors all the set parameters including temperature, Speed & time (1min to 999hr). The operator can program multistep programming (4steps) in each program. Built in self-diagnostic system along with over & under voltage protection system switches off the system in case of fault. Built in automatic shaking speed adjustment in case of unbalanced load/vibrations/ shocks.Independent alarm system (audio-visual) warns if the temperature deviates ±1DegC (adjustable) from the set point & speed varies ±2 rpm from the set speed (or even in stalled platform). An audio-visual alarm at the end of digital timing cycle is an added advantage. Bright LCD displays temperature, time & shaking speed digitally simultaneously on the same screen. The microprocessor controller is designed to retain parameters during power failure & restarts the unit automatically. Built in independent over temperature protection & cut off system. Built in data logging can be done with on board USB port by using a pen drive & the complete system can be remotely operated through a computer by using on board Ethernet port. An internal fluorescent light provides better visibility of samples. The chamber also consists of a built in rust free power socket for efficient operation.The 100 Ltr capacity chamber consists of 18”X18” universal platform to hold various spring based clamps. The platforms can be interchanged easily as per the operator’s requirement.The shaker also has a static incubation shelf facility for incubation of petri plates apart from the shaking & is provided with 2 shelves. Stainless steel clamps to hold various flask sizes 50mL, 100mL, 250mL, 500mL, 1Ltr. are provided along with the machine.The instrument is designed to operate on 220V Single Phase AC Supply with over current protection system.Accessories: Voltage Stabilizer of suitable rating  

We are well positioned among the topmost wheel mounted biochemical oxygen demand incubator exporters. B.o.d incubator is the most versatile low temperature indicator for biochemical oxygen demand determination. Castor wheel mounted cabinet is double walled with inner chamber of anodized aluminum or stainless steel and outer casing of m.s. Sheet duly painted. The gap of 75mm between the outer and the inner wall is filled with special grade glass wool to prevent thermal losses. Triple walled back of the unit is fitted with two air circulation fans for maintaining the temperature uniformly throughout the chamber. Heating elements of nicrome wire are placed in the air path and are duly insulated from the body. The inner chamber of low temperature b.o.d incubator is ribbed for placement of shelves at desired heights. Full view inner glass door permits inspection of specimens, without disturbing the same. Lock and key arrangement is provided in the double walled outer door. Unit is fitted with door operated illumination lamp inside the chamber. The temperature range from 5 degree celsius to 50 degree celsius is controlled by digital temperature controller cum indicator. Refrigeration unit is formed by hermetically sealed isi marked shriram make compressor and the cooling coil are distributed all round the chamber and lie in the air circulation path. Panel consists of separate indicator lamps for mains, heating and incoming voltage. Supplied complete with 23 shelves, cord and plug to work on 220230v a.c. Supply.

Thermostatically controlled by thermostat ambient to 80°C with a sensitivity ±1°C. Beaded heating elements are placed in ribs at bottom and sides. Double walled inside aluminium or stainless steel and outside mild steel sheet painted with attractive enamel. Door has double glass viewing, built in horizontal L-shape thermometer with perforated adjustable shelves, two pilot lamps, ON/OFF switch. To work on 220/230 voltsA.C. Inner Chamber size Aluminium & S.S.· 300 x 300 x 300mm (12"x12"x12")· 350 x 350 x 350mm (14"x14"x14")· 300 x 400 x 400mm (16" x 16" x 16")

Agro Equipment Industries is one of the reliable Egg Incubator Manufacturers and Suppliers. Our Egg Incubator is equipped with Double pressure fan. Specifications for Electric Automatic Incubators and Hatchers : Designed to operate on 220 Volts AC either single/three phase as specified by the customer.The exterior body is of fiber glass whereas the inside body is of galvanized sheets and high quality insulation.The front door provided is wide for easy access and maintenance, with a see through glass for observation.A slot is provided at the top for water supply which flows in the water pipes sealed beneath the insulation for effective humidity. Also, a control system is provided for maintaining the desired humidity.Control Panel � Separate switches for the following functions areprovided.HumidityPrimary heaterSecondary heaterAuto turningManual turningElectric motor for turningSealed heater with double element.Double pressure fan.Water cooling system for summer season.Double temperature switch for primary and secondary setting.Two thermometers for dry temperature and humidity are provided for effective mechanism of the Incubator/Hatcher.Heavy duty fans provided to eliminate air pockets and maintain uniform air drift at the temperature required. The Built in cooling central device works to eliminate excess heat.Capacities available - 1000/2500/5000/10000/15000/30000 eggsIn 1000 and 2500 eggs capacity the hatcher is in the same body as incubator. For higher capacities a separate hatcher is provided for easy operation and maintenance.

ROC - 131 BACTERIOLOGICAL ORBITAL SHAKING INCUBATOR Body made of thick stainless sheet 304 quality. Top lid is made of transparent see through plexi glass. Variable speed rotary shaker platform is fitted with imported DC driven motor for continuous operation. Unit is also fitted with digital RPM/Speed indicator Shaking platform can accommodate 16 flask of 250 \ 500 ml or 25 flask or 100 ml or 36 flask of 50ml provided at the base of incubator so as to shake Erlenmeyer flasks. Variable speed motor is fitted outside of the inner chamber at the base. Complete unit is mounted on a sturdy angle iron Frame. Temperature range from ambient to 700C is controlled by Digital temperature indicator cum controller with an accuracy of 0.50C.Provided fitted with air circulation fan for temperature uniformity. Work in 220/230V.AC supply OPTIONAL Spare set of lotus clamps

We are offering Mild steel Incubator. which the outer chamber is made up of mild steel and inner chamber with stainless steel. moreover, our incubator is fitted with temperature control knob that is offered with digital temperature indicator cum controller. accessories : stainless steel shelvesair circulation fandigital temperature indicator cum controllerthermostatically operated temperature control knobp.i.d. controller applications : medical clinicsnursing homeshospitalsmedical colleges.

Assuring proper shaking operations that are significant in diverse laboratory experiments, this Orbital Shaking Incubator has the advantage of maintaining an adequate storage temperature within a closed incubator. We are a dependable Manufacturer and Supplier of world-class Orbital Shaking Incubator. Construction & Working The outer chamber is made up of M.S. Sheet duly painted and inner chamber of thick S.S. Sheet. The gap between two walls is fitted with high grade glass wool to avoid thermal loss. The plaxi glass window makes it possible to inspect the specimen without disturbing the inner temperature. The lid of chest type unit is fitted with fluorescent tubes of 60 cm length, on the inner side, the unit has temperature range from 5 o C to 60 o C and is controlled with microprocessor based Digital Tempere Indicator-cum-Controller with and accuracy of + 0.5 o C when the tube lights are on temperature range is from 10 o C to 50 o C. Air circulation fan is fitted to maintain temperature uniformity throughout. Cyclic illumination conditions are controlled by an automatic timer (0-24 hrs.) fitted to the unit. It is fitted with Digital Speed Meter (RPM Counter) for shaking platform having variable speed. The shaker has variable speed and a platform containing 16 flasks of 500 ml. The Orbital Shaking Incubator is supplied with the standard accessory and works on 220/230 volts A.C. Supply. Variants Of Orbital Shaking Incubator Temp. Range from 5 o C above ambient to 50 o C - 85000/- Temp. Range from 5 o C to 50 o C - 124000/- Optional Accessories Spare shaking platform - 4000/- Additional non-shaking tray (Made of S.S.) - 2800/- Built in U.V. Germicidal tube light (Price for 2 nos.) - 6000/- Automatic voltage stabilizer 3.0 Kva (Triple Relay) - 6000/-

We provide BOD Incubator (Low Temperature) that is most versatile for biochemical oxygen demand determinations. We offer BOD Incubator at the most discounted price in the Industry. Construction : Castor Wheel mounted cabinet is double walled with inner chamber of aluminum or S.S and outer wall of M.S. Sheet duly painted. The gap of 75 mm between the outer and the inner wall is fitted with special grade glass wool to prevent thermal loss. Triple walled back of the unit is fitted with two air circulation fames for maintaining temperature uniformity throughout the chamber. Full view inner glass door permits inspection of specimens, without disturbing the same. Lock and key arrangements is provided in the double walled outer door unit, fitted with door operated illumination lamp. This lies inside the camber refrigeration unit which is formed by CFC free, eco-friendly compressor. The front panel is provided with separate indicator lamps for main, heating and incoming voltage. Components : 3 ShelvesCordPlug Specifications : Super Deluxe Digital ModelCapacity455x610x410mm4 Cuft.505x830x415mm6.1 Cuft.570x875x550mm10 Cuft.650x900x550mm12 Cuft.700x900x65015 Cuft.

Orbital Incubators Shaker are design for continues shaking for solution in Erynmeyer flask from 100 ml to 1000 ml at a constant set temperature range ambient + to 70 deg.C the outer body made mild steel, Inner chamber and shaking tray are made of SS 304G with fine finish. Plate- form is fitted with lotus clamps of nylon clamps. The motion of plate - form is by means of heavy duty DC motor with continues variable speed regulator , range 50 to 250 rpm.. Size 9 Flasks 250-500 ml. Size 16 Flasks 250-500 ml. Size 25 Flasks 250-500 ml