Incubators Dealers in Tri Nagar, Delhi

• Type: Good Quality
• Model Number: REW-203
• Brand Name: REW
• Certification: ISO-9001-2008
• Color: White

We are offering bod incubator. temperature range 5°c to 50°c with an accuracy of +/- 1°c double walled inside s.steel and out side mild steel painted and two air circulation fans. Full view inner glass door with magnetic gasket allows inspection of samples without disturbing the temperature of cabinet. To work on 220/230 volts. A.c.

• Small size capacity up to 42 liters: 6 sides direct heating system
• Fast heat-up and temperature recovery: Air jacketed heating method
• Dual beam IR CO2 sensor: Natural humidification using water tray
• Door heater minimizes condensation: Microprocessor PID controller
• HEPA filtration of gas supply inlets: 2 channels Touch operating panel
• Round corners for easy cleaning: Alarm for low & high deviation of CO2
• Perforated shelves for natural air flows: Over heating protection device

This mini CO2 Incubator by Bionics Scientific is a reliable, contamination free small sized unit with capacity of 42 liters. This unit is especially designed for smaller laboratories and possesses many advanced features required by professionals to achieve precise results. This small CO2 incubator features 6 sides direct heating, fast heat-up and quick temperature recovery and minimized condensation by front door heater and frame heater. This unit furthermore, offers over heating protection; heating is automatically cut by safety thermostat in case of temperature control failure and excessive heating over set point.   Bionics Scientific is a leading Indian company that manufactures Mini CO2 Incubator systems with 42 liters of capacity and supplies all over India at very reasonable price. These small sized CO2 incubators are designed for IVF and Cell laboratories to meet requirements of small scale research applications. The above system is our standard model that comes in 42 liters capacity, which can also be customized further to meet individual needs.

• Brand Name: APS

We offer Incubator . • Specially designed for incubation of Biochemical Oxygen demand on water and sewage; can be used as environmental study and growth chamber by incorporating lighting and humidification system. • Used in various applications for microbiology, cell cultivation of animals, plants & food studies- where experiments requiring low temperature conditions. Used for microorganism or activation, good storage and desalting process of enzyme extracts and for preservation of vaccines, insulin, level extracts, a* 15°C for serological and complement fixation tests for enzymatic digestion process. SALIENT FEATURES & CONSTRUCTION • Robust construction outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish. • Inner chamber made of STAINLESS STEEL SHEET (304 Grade). • Fitted with durable coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber. • Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement. • Door operated illumination lamp is fitted inside the chamber for easy visibility. • A full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature. • High grade PUF INSULATION between outer and inner chamber for minimal thermal losses. • Cooling is done by finned tube evaporator lie in the air circulation path by ISI marked CompressorCondensing Units CFC free & R-134 a eco friendly refrigerant. • Heating elements are placed in the path of moving air duly insulated from the body. • Inner chamber has ribs for placing the shelves at convenient levels. Supplied with 2 or 3 removable shelves. •

Cooling Incubators by M.K. Scientific Instruments are come with durable and rugged design for delivering excellent quality performance. These units are made with double walled construction and are fully insulated with polyurethane foam to reduce running costs. The exterior chamber is made of high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. The internal chamber is made of high grade corrosion resistant stainless steel. Each Cooling Incubator is delivered with number of shelves to keep the object in the units. The number of these shelves may vary model to model or size of the unit. Generally 2 to 6 shelves are provided with these units as per size and capacity. These shelves are made of aluminum sheets of stainless steel with polished layer. Double walled Inner Body: Inner chamber made of Stainless steel. Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. Insulation between inner & outer wall with polyurethane foam (PUF) to reduce running costs. Temperature Range: 5°C to 60°C with temperature accuracy of ±0.5°C. Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating. Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion. Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug. Safety Feature: Thermostat based safety device Shelves: Stainless steel perforated/wire road shelves adjustable and sliding. Door: Door with synthetic rubber gasket & Door has a glass viewer window. Heater: Tubular U type air heater. Compressor: Hermetically Sealed Air Cooling Compressor (CFC Free).

Infant Radiant Warmer 1951DX, medical furniture, other medical equipment

• Brand Name: Rebico
• Material: Metal
• Application: Industrial
• Resistivity: Rust Resistant
• Durability: Long Life
• Surface Finishing: Polished
• Drive Type: Electric

Our company is a prominent Manufacturer and Supplier of BOD Incubator (RS00I0101). The BOD Incubator is specially designed for incubation of Biochemical Oxygen demand on water and sewage; this can be used as environmental study and growth chamber by incorporating lighting and humidification system. The BOD Incubator is triple walled with anodized Aluminum/S.Steel from inside and mild steel outside fitted with air circulating fans. The BOD Incubator has a full view inner glass door with magnetic gasket that allows inspection of samples without disturbing the temperature of cabinet. Range 5oC to 60oC with an accuracy of ± 0.5oC by Solid State Digital Temperature Indicator cum controller. Refrigeration is done by ISI marked Compressor/Condensing Units CFC free & R-134 a eco friendly refrigerant and heating by air Heaters. Control panel has separate heating and cooling indicator lamps; temperature set allows the user to select any desired temperature. Voltmeter is provided at the panel to check the incoming voltage.

• Brand Name: Sisco India
• Material: Aluminium and SS Sheet
• Color: Blue and White
• Country of Origin: Made in India
• Voltage: 230 V
• Frequency: 50 Hz
• Usage/Application: Laboratory
• Shape: Rectangular
• Automation Type: Semi-Automatic
• Size (W x D x H): 300 x 300 x 300 mm
• Phase: Single Phase

• Country of Origin: India
• Type: Shaking Incubators
• Material: Mild Steel, Steel
• Certification: CE Certified, ISO Certified
• Application: Industrial Use, Medical Use
• Color: gray
• Voltage: 220V
• Condition: New
• Frequency: 50Hz
• Temperature: 5 to 80
• Volume: ALL SIZE
• Automation Grade: Automatic
• No of Shelves: 2 Shelves
• Brand Name: SHIVAM
• Power: 220

• Type: Egg Incubators
• Material: Metal, Aluminum, Haylam
• Certification: ISO Certified, ISI Certified, CE Certified
• Application: Medical Use, Industrial Use
• Color: White, Blue
• Condition: New
• Frequency: 60Hz, 50Hz
• Temperature: 0-50Deg C
• Automation Grade: Fully Automatic
• Country of Origin: India
• Brand Name: Powertek
• Voltage: 220 Volt
• Quality: Premium
• Warranty: 1 Year

• Country of Origin: India
• Type: Bod Incubator
• Application: Industrial Use, Medical Use

Shi-123 B.o.d. Incubator (super Delux Automatic) double Walled Chamber with Interior Walls Made of Stainless Steel. the Exterior is Made Heavy Mild Steel Finished with Stoving White Enamel. the Door is also a Double Walled Construction. the Temprature Range is from 5-60ºc, With an Accuracy of +/-0.5ºc, Controlled By Digital Temperature Controller Cum Indicator. Temperature Below Ambient is Maintained By a Hermetically Sealed Techumshah/kirloskar Condensing Unit / Compressor with Complete unit Provided At the Bottom, Complete with Stainless Steel Trays, Two Air Circulations Fan and Unbreakable Acrylic transparent, Inside Door. to Work On 220/230 V, Single Phase Ac Supply. chamber Size (wxhxd) Cap. (cuft.) S/steel a. 450 X 610 X 410 Mm 4.0 60000/- b. 500 X 825 X 415 Mm 6.1 66000/- c. 565 X 865 X 550 Mm 10.0 70800/- d. 650 X 875 X 550 Mm 12.0 83000/- e. 650 X 875 X 550 Mm 15.0 93500/- optional Accessories : 1. Inner Illuminator with 3 Nos. Fluorescent Tubes of 60cm. 3000.00 2. Automatic Cyclic Timer 0-24 Hours Regulating Illuminating Cycle 3600.00 3. Arrangement for Incubating in Co2 and Air Mixture with An 6000.00 inlet Nozzle Provided with a Means of Admitting of Co2. 4. Rs-232 Interference for Computer Compatible with Software. P.o.r. (shi-123)

The Low Temperature Incubator, often known as BOD incubators are designed to provide excellent temperature uniformity for a wide range of applications requiring low temperature conditions. They are most commonly employed for BOD determinations, fermentation studies, bacterial culturing, plant and insect studies, stability tests and other low temperature applications including desalting of enzyme extracts, serological and complement fixation tests, preservation of vaccines, animal and plant cell culturing etc. and often serve as bacteriological incubators, tissue culture incubators, hospital incubators and scientific incubators. Acmas Technologies Pvt. Ltd. is a leading manufacturer and exporter of these low temperature incubatorsin India, offering a wide range of products in both standard as well as customized models. The company offers highly versatile and economical temperature controlled incubators at affordable prices, specifically designed to meet the requirements of the industry. These highly efficient laboratory incubators use high quality construction materials such as anodized aluminium and epoxy powder coated MS sheets for a highly reliable and sturdy construction. They come equipped with adjustable shelves that can be rearranged with ease, allowing easy placement and segregation of differently sized samples. These double walled insulated cabinets are designed for maximum space efficiency and are available as both floor-mounted as well as bench-top models.  

Desiccation results in lost cultures.  It is important to maintain adequate moisture inside the chamber to prevent the drying out of cultures.  Large CO2 incubators may use steam-generators oratomizers to control relative humidity levels but most small to mid-sized incubators use humidity pans to produce humidity through evaporation.  Humidity pans produce relative humidity levelsbetween 95-98%.  Some incubators have a humidity reservoir that holds water in a heated pan.  This increases evaporation.  A humidity reservoir may increase the relative humidity levels to 9798% but this system is more complicated and problems may arise due to an increase in the number of components and these units may be prone to internal “sweating”. SKU: SAMSBS021 Category: Beauty & Slimming Equipment

Double walled construction. Outer body made of Mild Steel painted with white stoving enamel. Inner chamber made of stainless with ribs to hold a tray. Shaking platform also made of S. Steel; accommodate 16 flask of 500ml. capacity temperature controlled by Digital Temp. controller cum indicator from ambient + 5 to 70ºC, with an accuracy of +/- 0.5ºC or better shaking speed can be controlled by speed regulator fitted with D.C. drive and indicated by Digital RPM meter. A stainless steel perforated tray is also provided for the use of upper portion of the chamber as a simple bacteriological incubator. An illumination lamp is also provided inside the chamber. Suitable to work on 220/230 V, 50Hz, single phase AC supply.     CHAMBER SIZE : 625 X 550 X 550 MM (W x D x H)

• Double Walled Construction with Inner S.S. 304 Outer M.S. Duly Powder Coated Outer S.S. 304 • Gap between the walls is filled with special PUF Insulation to prevent thermal losses. • Full view inner glass door. Lock & Key arrangement, Caster wheel mounted cabinet • Cooling is by hermetically sealed compressor with CFC free refrigerant. • (2) Two Nos of Air Circulating Fan for uniform temperature • Temp. is controlled by Digital Temperature Controller cum indicator • Temp. from 5ºC to 60ºC ± 0.5ºC. • Door operated Special LED light illumination system inside the chamber • Supplied by wire mesh trays for uniform temp. • Complete with Cord & Plug to work on 220 Volts A.C. • Digital voltmeter is fitted on the control panel for displaying the Mains Input voltage.

The led light incubators from weiber are employed for a wide range of temperature sensitive applications and find widespread usage in various research laboratories and industrial units. They are available in various standard designs and configurations and can be completely customized as per specific requirements.

• Features: The temperature in the BOD Incubator is controlled by a sensitive thermostat from 5oC to 50oC ± 1oC. For lower temperature working, a standard cooling unit with sealed compressor
• Aluminum / SS Chamber sizes: 4 cubic ft., 6 cubic ft., 10 cubic ft., 12 cubic ft., 15 cubic ft.

We provide BOD Incubator (Low Temperature) that is most versatile for biochemical oxygen demand determinations. We offer BOD Incubator at the most discounted price in the Industry. Construction : Castor Wheel mounted cabinet is double walled with inner chamber of aluminum or S.S and outer wall of M.S. Sheet duly painted. The gap of 75 mm between the outer and the inner wall is fitted with special grade glass wool to prevent thermal loss. Triple walled back of the unit is fitted with two air circulation fames for maintaining temperature uniformity throughout the chamber. Full view inner glass door permits inspection of specimens, without disturbing the same. Lock and key arrangements is provided in the double walled outer door unit, fitted with door operated illumination lamp. This lies inside the camber refrigeration unit which is formed by CFC free, eco-friendly compressor. The front panel is provided with separate indicator lamps for main, heating and incoming voltage. Components : 3 ShelvesCordPlug Specifications : Super Deluxe Digital ModelCapacity455x610x410mm4 Cuft.505x830x415mm6.1 Cuft.570x875x550mm10 Cuft.650x900x550mm12 Cuft.700x900x65015 Cuft.

Our Baby Incubator is a temp-controlled unit is operated by advanced micro computer technology. The three digital display indications provide the set temperature, Air Temperature and skin temperature. Two function control modes provide the clinician more flexibility while optimizing the thermal environment. In addition the display of skin temperature is larger than the set/air temperature display. The removable heater and control unit make it easy to clean and service. Full visibility & accessibility of the baby is provided by the design of acrylic hood. A Full complement of alarm provides safety convenience, with both audible and visual indicators.   Dimensions : 110 x 50 x 150 cm (approx.) Weight : 70 kg (approx.)

• Voltage: 110 V
• Frequency: 50 Hz
• Model Name/Number: GGT-405
• Brand Name: Zextor
• Power: 1000W
• Dimension: 1.57 x 2.07 x 1.80(m)

Fermenter Vessel, industrial electric ovens, scientific instrument

Industrial Furnaces, Rapid Moisture Tester, Gold Melting Furnace

neonatal equipments, transilluminator, Resuscitator

Muffle Furnace High Temperature, Laboratory Muffle Furnace 1000 Deg. C.

Autoclave Vertical, oven universal, Magnetic Stirrers, Hot Plates