Incubators Dealers in Pitampura, Delhi

• Brand Name: U-Tech
• Temperature Range: 5 to 75 Degree Celsius
• Voltage: 220-240v Single Phase
• Material: MS
• Weight: 80-150 kg

Double walled, inner made of Stainless Steel 304 quality, outer made of thick best quality Mild Steel the surface of which is primer coated for anti rusting and is duly white stove powder coated paint. Insulation between inner and outer wall is done with 75mm thick glass wool to prevent any heat loss. Inner chamber is provided with 2/3 nos. perforated stainless steel shelves with ribs to adjust the shelves at desirable height. Provided with double door, inner made of thick transparent full view glass and outer door is double walled metallic properly insulated with glass wool and also provided with best quality handle, gasket, lock etc. Provided with door operated illumination lamp. Whole unit is mounted on castor wheels. Temp. Range is from 5°C to 60°Cand is controlled by electronically controlled by PID Microprocessor Controller with PT-100 sensor. This controller is provided with time delay relay to control the accuracy in maintaining the temperature. Temp. is maintained with an accuracy of + 0.5°C. Cooling is done with ISI Mark compressor of KIRLOSKAR make which is connected to thick copper coils placed in the rear of the chamber through condenser, fan motor, capacitor, relay etc. Whole cooling unit is placed below the main chamber in a GI housing. CFC Free, Environment friendly. Heating is done with ISI mark strip type heaters placed near the cooling coils. Air is circulated by 2-nos. ISI mark Silicon bind motors, which are connected to balanced blowers, which operates alternatively and continuously with heating and cooling. Provided with On/Off switch, Indicators, Digital Controllers etc.

 Biochemical Oxygen Demand (BOD) incubators or low temperature incubators enable end users to determine levels of organic matter and nitrogen in wastewater samples. This wastewater must be effectively measured for contaminates, treated and then released back into the environment without posing a threat to the water supply system. Recently, stricter enforcement by government regulatory agencies charged with monitoring air and water quality has forced a greater number of organizations to actively test and treat their wastewater. BOD incubators facilitate the storage of wastewater samples, and can accommodate from 62 – 565 BOD bottles. Microprocessor based temperature regulator(HMI+PLC as an option) CFC free refrigeration unit RS232 interface incorporated Calibration and protocol documentation Castor wheels for ease in movement. Providing fast and accurate results Digital Display Temperature Safety Thermostat Push-button controls for temperature set point selection Forced-air circulation delivers excellent temperature stability Easy-to-clean, corrosion-resistant construction Compressor relay conserves energy Full opening door with silicon gaskets hinged on left side Heated viewing window

Incubator Bacteriological (Memmert Type) (PLT-136) APPLICATIONS OF BACTERIOLOGICAL INCUBATOR Bacteriological Incubator (Memmert Type) Double walled is elegantly designed in various applications for microbiology, cell cultivation of animals and plants, food studies. Our Incubators stands for unparallel precise, even and gentle temperature control. Double Walled Incubators (Memmert Type) is low cost options for various experiments in, industries, R&D labs, Pharmaceutical, Food & Beverage Industries and Institutions- in the field of Medical, Agricultural and Industrial Research used for Drying of slides, paraffin embedding, tissue culture work, incubation of antibody test, excellent for Microbiological determinations, crystallization studies and Incubation of hydroxyl steroids. SALIENT FEATURES & CONSTRUCTION OF BACTERIOLOGICAL INCUBATOR Outer chamber is made of Mild Steel duly powder coated. Inner chamber made of ALUMINIUM or STAINLESS STEEL (304) sheet. Forced convection system ensures good mixing, strong dispersion and maintains higher temperature uniformity inside the chamber. Door has double viewing window to observe the sample placed inside the chamber without disturbing the thermal condition. Thermal loss is prevented by filling mineral wool (Insulation) in space between the outer body & Inner chamber. Door Gasket fixed on the double walled door for proper sealing. Fitted with heavy hinges with a ball catcher, spring loaded door closing device. Door is duly insulated. Adjustable two ventilation slides control inner air / vapour circulation. Beaded heating elements made of high quality Nichrome/Kanthal wire are placed in ribs, at bottom and sides for uniform heat distribution. Inner chamber has ribs for placing the shelves at convenient levels. Supplied with 2 or 3 removable shelves. Temperature is controlled by thermostat from 50°C to100°C ± 1°C. fitted on the front panel for easy operations. Different programme functions can be designed for a wide variety of applications, and even when used Temperature is displayed by Digital LED with SV and PV display at front of the oven. Front Panel is provided with ON/OFF switch, temperature controller and indicators Supplied with cord and plug. Operating Voltage: 220 Volts AC (50 Hz).  

We are leading supplier of huge range of Oven Incubator.

The led light incubators from weiber are employed for a wide range of temperature sensitive applications and find widespread usage in various research laboratories and industrial units. They are available in various standard designs and configurations and can be completely customized as per specific requirements.

We are offering incubator, incubator shaker.we specialize in laminar flow cabinets, bio safety cabinet and clamp, clean air instruments, pan box, incubator and incubator shaker.

• Brand Name: Rebico
• Material: Metal
• Application: Industrial
• Resistivity: Rust Resistant
• Durability: Long Life
• Surface Finishing: Polished
• Drive Type: Electric

We are a renowned Manufacturer and Supplier of Bacteriological Incubator (RS00I0102). The Bacteriological Incubator is a study double walled unit with outer chamber made of M.S. sheet duly powder coated and painted and the inner chamber made up of anodized aluminum or S.S. sheet. The gap between inner and outer chamber is fitted with high grade glass wool to avoid thermal losses. Beaded heating elements are placed in ribs, at bottom and sides. Inner chamber of the Bacteriological Incubator is provided with ribs for adjusting perforated shelves to convenient height. The door is fitted with perforated shelves to convenient height. The door is also fitted with glass viewing window for inspection of sample without disturbing the test temperature. Temperature is controlled by EGO / JUMO GERMAN hydraulic type Capillary thermostat/ Digital Temp. Controller from ambient 70oC ± 0.5oC an L-shaped prismatic Thermometer is fitted to unit for reading the chamber temperature (only Thermostatic Controlled) Air Ventilators are also provided on the sides of the Bacteriological Incubator. The Bacteriological Incubator works on 220/230 volts A.C. Supply.

• Type: Egg Incubators
• Material: Metal, Aluminum, Haylam
• Certification: ISO Certified, ISI Certified, CE Certified
• Application: Medical Use, Industrial Use
• Color: White, Blue
• Condition: New
• Frequency: 60Hz, 50Hz
• Temperature: 0-50Deg C
• Automation Grade: Fully Automatic
• Country of Origin: India
• Brand Name: Powertek
• Voltage: 220 Volt
• Quality: Premium
• Warranty: 1 Year

• Country of Origin: India
• Type: Bod Incubator
• Material: Mild Steel, Stainless Steel
• Certification: CE Certified, ISO Certified
• Application: Industrial Use, Medical Use
• Color: Blue
• Voltage: 220V
• Condition: New
• Frequency: 50Hz
• Temperature: 5 TO 75C
• Volume: 100 TO 1000 LTR
• Automation Grade: Automatic
• No of Shelves: 3 Shelves
• Brand Name: SHIVAM
• Power Supply: 220V

• Country of Origin: India
• Type: Bod Incubator
• Application: Industrial Use, Medical Use

Shi-123 B.o.d. Incubator (super Delux Automatic) double Walled Chamber with Interior Walls Made of Stainless Steel. the Exterior is Made Heavy Mild Steel Finished with Stoving White Enamel. the Door is also a Double Walled Construction. the Temprature Range is from 5-60ºc, With an Accuracy of +/-0.5ºc, Controlled By Digital Temperature Controller Cum Indicator. Temperature Below Ambient is Maintained By a Hermetically Sealed Techumshah/kirloskar Condensing Unit / Compressor with Complete unit Provided At the Bottom, Complete with Stainless Steel Trays, Two Air Circulations Fan and Unbreakable Acrylic transparent, Inside Door. to Work On 220/230 V, Single Phase Ac Supply. chamber Size (wxhxd) Cap. (cuft.) S/steel a. 450 X 610 X 410 Mm 4.0 60000/- b. 500 X 825 X 415 Mm 6.1 66000/- c. 565 X 865 X 550 Mm 10.0 70800/- d. 650 X 875 X 550 Mm 12.0 83000/- e. 650 X 875 X 550 Mm 15.0 93500/- optional Accessories : 1. Inner Illuminator with 3 Nos. Fluorescent Tubes of 60cm. 3000.00 2. Automatic Cyclic Timer 0-24 Hours Regulating Illuminating Cycle 3600.00 3. Arrangement for Incubating in Co2 and Air Mixture with An 6000.00 inlet Nozzle Provided with a Means of Admitting of Co2. 4. Rs-232 Interference for Computer Compatible with Software. P.o.r. (shi-123)

We are well positioned among the topmost wheel mounted biochemical oxygen demand incubator exporters. B.o.d incubator is the most versatile low temperature indicator for biochemical oxygen demand determination. Castor wheel mounted cabinet is double walled with inner chamber of anodized aluminum or stainless steel and outer casing of m.s. Sheet duly painted. The gap of 75mm between the outer and the inner wall is filled with special grade glass wool to prevent thermal losses. Triple walled back of the unit is fitted with two air circulation fans for maintaining the temperature uniformly throughout the chamber. Heating elements of nicrome wire are placed in the air path and are duly insulated from the body. The inner chamber of low temperature b.o.d incubator is ribbed for placement of shelves at desired heights. Full view inner glass door permits inspection of specimens, without disturbing the same. Lock and key arrangement is provided in the double walled outer door. Unit is fitted with door operated illumination lamp inside the chamber. The temperature range from 5 degree celsius to 50 degree celsius is controlled by digital temperature controller cum indicator. Refrigeration unit is formed by hermetically sealed isi marked shriram make compressor and the cooling coil are distributed all round the chamber and lie in the air circulation path. Panel consists of separate indicator lamps for mains, heating and incoming voltage. Supplied complete with 23 shelves, cord and plug to work on 220230v a.c. Supply.

Scanning Electron Microscope, blood plasma freezer, Centrifuge

• Voltage: 220 V
• Power Source: Electric
• Display Type: Digital
• Phase Type: Single Phase

Double walled Chamber with interior walls made of stainless steel. The exterior is made heavy mild Steel powder coated.. The door is also a double walled construction. The Temperature range is from 5-60ºC, with an accuracy of +/-0.5ºC, controlled by Digital Temperature controller cum Indicator. Temperature below ambient is maintained by a hermetically sealed TECHUMSHAH/KIRLOSKAR Condensing Unit / Compressor with complete unit provided at the bottom, Complete with Stainless Steel Trays, two air circulations fan and unbreakable acrylic transparent, inside door. To work on 220/230 V, Single phase AC Supply. Optional Accessories: Inner illuminator with 3 Nos. fluorescent tubes of 60cm. Automatic cyclic timer 0-24 hours regulating illuminating cycle Arrangement for incubating in CO2 and Air mixture with an inlet nozzle provided with a means of admitting of CO2 . RS-232 interference for computer compatible with software

• Voltage: 110 V
• Frequency: 50 Hz
• Model Name/Number: GGT-405
• Brand Name: Zextor
• Power: 1000W
• Dimension: 1.57 x 2.07 x 1.80(m)

Kjeldahl Distillation Assembly, Laboratory Ovens, Laboratory Refrigerators

sensor switches, Digital Timers, Data Loggers, pid controllers

• Accuracy: 1% of Full Scale or ± 2°C. (Software Linerlized)
• Power Supply: AC 180 - 240 V AC (50/60 Hz)
• Dimensions: 96(W) x 96(H) x 110mm(D)
• SENSOR INPUT: PT-100
• DISPLAY: Dual Display (For Set Point & Current Temperature)
•  : 41/2digit upto full range
• CONTROL ACTION: Time Proportionating (Proportionate Band 3% of Full Scale) ON/OFF Control : Hysteresis (optional)
• CONTROL OUTPUT AVAILABLE: Relay Control : AC 250V, 5Amp (Resistive Load) IC (NO/NC) Contact SSR Driving: 0/12V DC (Control Voltage Pulse Load Resistance more than 1000 ohms) (optional) Current : 4-200mA DC (Load Resistance less than 800 ohms)
• NO. OF OUTPUT STAGE: 1 Stage for Heating & 1 Stage for Cooling.
• COOLING DELAY: Adjustable by front Key Pad.
• HEATING (PI ACTION): Adjustable by front Key Pad.
• TEMPERATURE SETTING: By Front Key Pad.
• AMBIENT TEMP./ HUMIDITY: 0-50°C, 35 to 85% RH
• REOLUTION: 0.1°C up to 60.0°C
• SENSOR ERROR: Adjustable + 9.9°C TO -9.9°C,

Autoclave Vertical, oven universal, Magnetic Stirrers, Hot Plates

neonatal equipments, transilluminator, Resuscitator

humidity ovens, Laboratory Ovens, Gas Chromatograph