Labsol Enterprises Ramesh Nagar, Delhi

We are offering wrist action shaking machine. Labsol introduced world's best wrist action shaking machine, which is used for general-purpose and it’s found very useful for mixing or agitation ingredients, solution in flasks, designed to hold flacks from 100 ml to 1000 ml council or round bottom. Variable speed controlled by regulator fitted with fractional hp motor. The power supply is 220 volts ac -50 hz. It has a heavy cast iron base with rugged construction and two side arms for holding flasks. It is fitted with a f.h.p. Heavy duty motor with variable speed. It can hold flasks from 100 to 1000 ml. The capacity is supplied with cord and plug to work on 220230 volts a.c. Supply. it is general purpose machine and found very useful for mixing or agitation ingredients, solution in flasks, bottles, beakers and kahn rocks etc. use: • to hold 4 flasks. • to hold 4 flasks and top platform to hold 4 flasks • to hold 8 flasks. • to hold 8 flasks and top platform to hold 4 flasks.

We are offering Weighing Balance. SALIENT FEATURES • External Calibration • A built in under hook for below weighing • Easy to read Backlight LCD Display • Density measurement for solid & liquid (Optional) • Standard RS 232 C Interface • Overload Protection • Percentage (%) Weighing • High Resolution, Quick Weighing, • Based on E.M.F.C. Technology • Tare range upto max. Capacity • Multiple Weighing Units • Animal Weighing Function • Counting Weighing mode

We are offering water distillation. Double walled: inner and outer body and boiling condenser also made of stainless steel. This method of producing and storing distilled water is designed specially to meet the needs of the modernhospital and laboratory research. To work on 220 volts a.c supply with 3 core wire and plug (without rubber tubing). Application • double walled construction with inner and outer chamber made of stainless steel. • the gap in between filled with glass wool. • condenser & top are also made of stainless steel. • ss-304 grade argon arc welded. • supplied with the rubber tubing coil of 5 meters. • supplied with cord & plug to work on 220230 volts ac supply.

We are offering rectangular double walled water bath. It is a double walled bath with inner chamber made of stainless steel and outer wall are made of mild steel sheet duly powder coated. The gap between outer and inner walls is filled with special grade glass wool insulation. The concentric rings can be removed to accommodate containers of microprocessor based pid controlled. Temperature range from ambient to 100°.c. ± 1°c. Supplied complete with two indicator lamps, concentric rings, onoff switch, cord & plug. Suitable to operate on 220 230 volts single phase, 50 hz. Ac supply.

We are offering vortex mixer. Useful for accelerated mixing of solutions in test tubes, small flasks or centrifugal tubes etc. The housing is 150 x 150 mm. The speed is regulated by a speed control device. Short eccentric stroke motor imparts vigorous agitation to the tubes or flasks. Body is strong and finished in stoving enamel paint. The equipment is workable on 220 v ac 50 hz single phase fitted with neoprene rubber cup in part vigorous agitation. unit is very useful for stirring test tube, centrifuge tube. Mixing action is controlled by varying the angle and pressure of the tube by hand shaking starts the vessel. (neoprene rubber cup) with touch onoff system

We are offering viscosity bath. These are engineered in accordance with international industrial standards and using optimum quality components. It has its robust construction, high functional efficiency and durability. Application: equipment specially designed for tests in the field of medical, agricultural, bio-chemical, r & d & q. C. Laboratories. Construction: double walled, exterior of crca gi, non-contaminant epoxy powder coated & inner chamber of aisi s. S. 304, with puf insulation, s. S. Lid on top with provision fro holding viscometer holders. Circulations: high efficiency motor dc motor. Heaters: s. S. Tubular heaters for maintaining of temp. Refrigeration systems: hermetically sealed compressor provides temp. For below ambient conditions, refrigerant cfc free. Temp. Control: microprocessor electronic digital temp. Control panel housing all the control switches with a class pt – 100 sensor. Optional: models available as per gmp, complete s. S unit, strip chart recorder with printer interface, rs 232 cpc, rs-485 interface for multiple networking of controller. Safety features: safety thermostats for over shooting of temp. Safety circuit to cut off the whole system in case of malfunction ( applicable to microprocessor based models only) hrc fuses for compressor heaters & mains, time delay.

We are offering buchi type vacuum rotary evaporator. specifications: • the apparatus consists of an 800ml evaporating flask rotated by heavy duty motor in a heating water bath. • fitted with motorized auto lift system which operates up or down on touch of a button. • fitted with speed regulator for speed adjustments. • the evaporating flask is pear shaped to give a large surface area of evaporation. Evaporating flask is clamped to a glass duct which goes through the drive unit and protrudes into the condenser. • vacuum distillation of solvent at high and low temperature is achieved quickly by use of a heavy duty motor, which prevents foaming and bumping of the liquid (solvent) into the evaporating flask and also distillation under controlled atmosphere. • condenser is fitted with standard joint at the top and the bottom for receiver flask. • supplied complete with water bath digital and fitted with digital rpmspeed meter.

We are offering vacuum oven. main features: • rectangular vacuum oven is double walled. • inner & outer chamber is made of thick stainless steel s.s. 304. • compact size, large load • vacuum chamber is wrapped with set of high quality heater for quick & uniform heating. • digital pid controller for easy and faster • temperature setting with over temperature alarm indication • independent over temperature safety protection • precise vacuum gauge upto 30 hg analoguesdigital temp. Controller with led display (made in japan) • easy to read vacuum gauge • highly versatile oven for atmospheric or reduced atmosphere operation • suitable for solvent removal • tough steel construction with strong door closure • full view toughened glass window

We are offering vdrl rotator. used for v.d.r.l. Tests, blood grouping tests, various agglutination tests or for mixing of solutions in small bottles flasks of beakers. It has a platform of size 300x300mm and can accommodate blood bottles slides or flasks using a spring holder. Supplied complete with cord and plug to work on 220 230 volts a.c.

We are offering ultrasonic pulse velocity. Unbeatable pundit® lab features measurement performance; optimized pulse shaping, atomated transmission settings for optimum performance and a range of new, more powerful transducers ensure accurate, stable measurements. Integrated waveform display; allows analysis of the received signal and manual triggering directly on the instrument. On-line data acquisition; full remote control of all transmission parameters, data logging function and functionality that turns your pc into an oscilloscope. Usb interface and data analysis software; data analysis and export to third party programs. Open interface; control pundit lab using third party software such as lab view. new features in pundit® lab+ integrated gain stage; removes the need for an external amplifier when using exponential transducers and long cables. Compressive strength measurement; conversion curves for strength estimation can be created in the software and uploaded to the instrument to give instant strength estimations on site. 1combined estimates with rebound hammer; sonreb curves may also be uploaded onto the instrument for improved compressive strength estimates in combination with rebound hammer measurements. Time stamp; a real time clock has been integrated to provide a time stamp to every measurement recorded. Review list; saved measurements may be reviewed directly on site without the need for a pc connection. an extended range of transducers a complete range from 24 khz up to 500 khz for various applications including: • improved 54khz and 150khz transducers; a new design with improved performance to increase range and stability. • improved 54khz exponential transducers; a new design with improved performance. When used in combination with pundit lab+ no external amplifier is required. • 250khz shear wave transducers; for use in combination with standard p-wave transducers to measure the dynamic elastic modulus of the material under test.

We are offering terg - o – tometer. • modular electronics for easy on-site user servicing. • microprocessor controlled with push-button panel controls. • variable speed, direct drive motors for agitation cycles. • automatic electronic timer with digital display for washes and rinse cycles. • microprocessor controlled water bath temperature monitor with digital temperature display.

We are offering stability test chamber. Material of construction: castor wheel mounted cabinet is double walled with inner chamber of stainless steel sheet of grade ss 304 and outer wall of heavy gauge pcrc steel. Sheet duly degreased and pre treated with primers for rust proofing duly painted with attractive stove enamel or powder coated . temperature range: 10 degree c to 60 degree c (accuracy: + 0.2o c) temperature control: the temperature inside the photo stability test chamber is controlled by intelligent programmable temperature controller and indicator. This controller is based on the microcontroller nano watt technology and its ergonomic design suits for any specific requirement of the photo stability test chamber like data logger facility, thermal and dot matrix interface, direct data load facility in computer office automation software like ms-word and excel and many other features listed in the specification bellow. humidity range: 40% to 95% rh (accuracy: + 1%) accurate micro processor based humidity control system: the labsol” stability chamber uses a microprocessor based; electronic humidity sensor detector is an exact logarithmic function of the humidity concentration in the environment of the chamber between source and detector. Advanced design provides a very stable drift-free output requiring less frequent calibration. illumination: our photo stability chamber conforms to the illumination requirement as per the international conference on harmonization of technical requirements for registration of pharmaceuticals for human use the unit is provided with four fluorescent light mounted in a diffuser enclosure at the top of the chamber providing minimum illumination level of 1.2 million lux ,which is effectively controlled through a programmable illumination controller

We are offering spectrophotometer. sailient features : • the innovative optical layout and state of art mono-chromator with high grade blazed holographic grating ensure accuracy. Its integrated design assures long term stability and durability. • the precisely aligned detector and quality deuterium and halogen lamps enhance the precision across the uv vis spectrum starting from 190nm and into the near-infrared 1100nm. • the two detectors are used to measure sample and reference respectively for optimizing measurement accuracy. • lamp selection enables conserving the life of d2 & tungsten lamps. Real time clock for date & time stamping of results. • big lcd display (320 x 240 dots). • functions: basic mode, quantitative, kinetics, multi-wavelength, wavelength scan, dnaprotein test & utility functions of software:- • basic mode to measure the absorbance and transmittance • quantitative coefficient method standard method curve. Up to 10 standard samples may be used to establish a curve. Four methods to fitting a curve through the calibration points: linear fit through zero, square fit & cubic fit. • wavelength scan the wavelength scan intervals are 0.1, 0.2, 0.5, 1, 2 & 5 nm fast, medium & slow scan speeds are available. They very from100 to 1800 nmmin. Wavelength are scanned from high to low so that the instrument waits at high wavelength and minimizes the degradation of uv sensitive samples. • multi-wavelength up to 32 wavelengths can be selected and multiple samples can be measured.

We are offering soxhlet extraction unit. applications • soxhlet extraction unit consists of mild steel sheet housing, two vertical & two horizontal rods with adopters and screws to hold the flasks. • institute • medical college • industries • pharmacy colleges and industry • laboratories • hospitals • pharmaceutical industry features: * heating element attached to knitted fabric for flask support * gap between the metal casing and the heater is filled using glass wool * solvent escapes through the draining hole below each element or evaporate in case of spillage * extraction apparatus is fixed on housing having two retort rods and a cross bar * in-built energy regulator for controlling all the heaters * heating elements with separate onoff switches for convenience * pilot lamp for indication of working status

We are offering Sieve Shaker Machine. Usage: The size distribution is often of critical importance to the way the material performs in use. A sieve analysis can be performed on any type of non-organic or organic granular materials including sands, crushed rock, clays, granite, feldspars, coal, soil, a wide range of manufactured powders, grain and seeds, down to a minimum size depending on the exact method. Being such a simple technique of particle sizing, it is probably the most common. Table Model Analytical Sieve Shaker Used in research and development, quality control of Raw Materials, as well as in production monitoring. Method: The vertical throwing motion is overlaid with a slight circular motion which results in distribution of the sample amount over the whole sieving surface. The particles are accelerated in the vertical direction (are thrown upwards). In the air they carry out free rotations and interact with the openings in the mesh of the sieve when they fall back. If the particles are smaller than the openings, they pass through the sieve. If they are larger, they are thrown upwards again. The rotating motion while suspended increases the probability that the particles present a different orientation to the mesh when they fall back again, and thus might eventually pass through the mesh. Product Details: An ideal equipment for normal day to day laboratory purpose, suitable for 8" Test Sieve (Soundless , Vibration type). Fitted with F.H.P Electric Motor. It can accommodate 6 Test sieves of 8" Dia with Lid and pan. Speed can be regulated through variable speed regulator to work on 220 volts A.C , speed regulator to work on 220 volts A.C.

We are offering seed germinator. Illumination and illumination control the chamber of our seed germinator are equipped with fluorescent light for enabling photosynthesis & are switched onoff by 0-24 hours timer to simulate the daynight conditions. humidification:-humidity inside the chamber us provided by steam generated through heating water with the help of immersion type heater. A water reservoir is provided in the machine with heaters and controls for this purpose, to achieve 90 to 96% + 3% rh (non adjustable) temperature control the temperature inside our chambers is controlled through programmable micro-processor based temperature controller cum indicator. Temperature range: temperature range of our standard seed germinator models are 5o c to 60o c control panel: switches and indicating light for cooling heating, humidity and illumination, timer, thermostats, etc. Are provided on the control panel for easy access. Suitable to work on 230 volts single phase, 50hz ac supply. air circulation: triple walled back of unit is fitted with two air circulation fans for maintaining temperature uniformly throughout the chamber. Features of coaxial circulation fan: • vacuum impregnated stator winding with dr. Back varnish under red baktol • non-hygroscopic. • best ir value • bright bar (en - 8 class) shaft. • bush bearing of branded companies. • surge comparison testing in fans and pumps eliminates into turn short circulating of the stator. • pressure die-casted-rotor manufactured with zero error. • boats of high accuracy

We are offering salt spray chamber. 1. Digital indicators cum controller its function is to indicate and maintain the temperatures. For solution tank itsfunction is to indicate and maintain the temperatures and for test cabinet, its function is to indicate the temperature only. 2. Digital timer (999 hours) with cutt-off facility it shows the working time for the apparatus & the time consume in the process in digitally system. Time limit is for 999 hours. 3. Humidity indicator with sensor humidity can be checked in digitally way. Its function is to maintained during the salt spray with saturation of salt solution. 4. Air regulator (frl unit) the air regulator will maintain a constant pressure of air. 5. Air filter (frl unit) the compressed air will be passed through a filter arrangement to remove all traces of oil and solid matters before sent to the saturation tower. 6. Mist dispersion automizer atomizer made of s.s will be equipped in the chamber having property of nonchoking.it produces a mist of atomized solution, which is distributed uniformly through out the exposure zone by means of mist dispersion atomizer incorporated with a baffle to prevent dispersion of large liquid droplets.

We are offering rebound hammer. key features: 1. high contrast oled display 2. all setup can be made on site 3. automatic calculating compressive strength 4. all data will be stored in memory 5. all data can be transferred to pc usb or blue tooth (optional) 6. dual display for analog ruler and digital value

we specialize in both standard and customized models of portable autoclave specially designed to meet various special requirements of our customers across india and abroad. over a short period of time labsol brand have been established as a leading exporters of portable autoclave in india, catering to south asian, african and european markets. beside the regular exports we are also catering to our domestic market and are suppliers of our portable autoclave to various laboratories, institutes, hospitals, nursing homes and research faculties. labsol steam autoclave sterilizers are competent portable autoclaves available today. as leading autoclave manufacturer in india, labsol has expertise in designing and manufacturing of custom portable autoclave, medical autoclave and steam autoclave sterilizers. portable autoclaves (pressure cooker type) by labsol are perfect for laboratory research and testing and come with simple design that provides easy and safe operation anywhere that has an appropriate power supply. as these units are completely self-contained they do not require plumbing. our range of portable autoclaves, laboratory sterilizers or steam autoclave sterilizer is reliable and a convenient method for steam and sterilization of medical equipments. these autoclave sterilizers use vaporized water, or steam to sterilize. our range of portable autoclave often called medical autoclave units also do not require complicated installation. applications • our portable autoclaves are most ideal for doctors, nursing homes, laboratories, dentists etc. • portable autoclave is most ideal for general laboratory requirement where samples in small batches

We are offering plant growth chamber. features:- • many area of plant research require the use of a controlled environment. In this way, a plant’s response to different conditions can be monitored or a particular habitat imitated. Standard propagation techniques can be greatly speeded up using a growth cabinet as well as achieving a higher success rate. Where micro propagation is being used a growth cabinet is essential for rooting the plantlets and adapting them to normal conditions. This plant growth cabinet is ideal for all routine propagation and research applications. • oriented design of shelves makes you adjust each space of shelves without difficulty. • with a solid see through double walled door and a full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature. • front double walled door is provided with lock and key arrangement • caster wheel mounted for easy portability. • excellent quality magnetic gum packing door gasket for external door. • door operated illumination lamp is fitted inside the chamber for easy visibility. • foamed-in-place puf insulation ensures thermal stability and reduces electrical energy consumption.

We are offering benchtop type ph meter. Salient features:- • automatic calibration • lmph meter is capable of calibrating up to 2 points using usa or nist ph standard buffer. Press cal key to enter calibration mode and immerse ph electrode into indicated calibration solution, press enter key and meter is automatically calibrated. • auto-buffer recognition during calibration, if the calibration solution does not match the meter's indicated value, an error message is displayed. • view electrode slope after calibration, the percentage slope of the electrode is displayed before the meter returns to measurement mode. Per the slope value,you decides whether to change the ph electrode. • automatic temperature compensation using the supplied temperature probe, the temperature value is displayed on the screen. The meter provides manual or automatic temperature compensation mode for optimum accuracy under variable temperature conditions. • fluid resistant housing and swivel electrode holder the integrated plastic housing and keypad is sealed to protect against accidental spills and splashes. The electrode holder arm is rapidly switched to both sides and swivels and articulates for convenient use and positioning.

We are offering pass box. Dynamic pass box are self-contained units installed at the entrance to clean rooms. They minimize the amount of particulate contamination and is easy to install and adaptable to existing facilities. The pass boxes offered by us are the safest equipment which contain clean zone cross contamination of material in transit. These boxes operate on the principle of one door opening at a time with electromagnetic interlocking so as to avoid any possibility of cross contamination. our custom made units are easily installed on the wall between clean room and other room and are made with good abrasion-resistant epoxy-coated steel. With uv light these are fitted with a mechanical interlock system that prevents both doors from being opened at the same time. Offers unmatched prices, usage and application for various pharmaceutical industries. construction details- our tailor made unit has double walled construction and is available in powder coated mild steel, ss 304 ss 316 ss 316l or a combination of both. salient features • finish - matt finish • confirms to gmp norms • mechanical or electromagnetic interlocking • floor and wall mounted design • maximum chemical resistance construction • modular & economical applications • medical implant • medical devices • educational institution • vaccine manufacturers • food processing industry technical specifications construction stainless steel 304 316 316l or pcrc powder coated door mechanical or electromagnetic interlocking accessories hour meter, fluorescent light, uv light, buzzer and indicator lamps filtration efficiency ≥ 99.99% @ ≥ 0.3μm hepa filter in-built u.v lamp in-built power supply 220 230 volts

We are offering double walled hot air oven. salient features • versatile usage • ergonomic design • energy efficient • long life • low maintenance construction details (hot air oven): our laboratory ovens are double walled convection heated units. Outer body of our hot air oven are constructed out of thick pcrc sheet duly pre-treated with primers and duly powder coated. The inner chamber is made of heavy gauge stainless steel sheet of ss-304 grade. The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our laboratory ovens. The unit is provided with one to threefour stainless steel shelves (as per the inner size). heating: indirect three side heating system is provided in our units, comprising of air heaters made of high grade kanthal a-1 wires of suitable wattage. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring very good temperature sensitivity. Temperature range: temperature range of our standard laboratory oven models are 5º c above ambient temperature to 250º c. however we have the capacity to modify the same to suit the individual specialized requirements of our customers. Temperature sensitivity: temperature inside our hot air ovens are controlled with a sensitivity of + 1° c or better. Front panel: front panel of our units comprises of onoff switches heating and mains indicator lamps, temperature controllers