Pharmaceutical Machines Dealers in Andheri West, Mumbai (32 products available)

The Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. All the contact parts made out of stainless steel of required grade by customer. Two third of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc. Double Cone Blender Salient Features of Double Cone Blenders : The conical shape at both ends of Double Cone Blender enables uniform mixing and easy discharge. All contact parts are made out of stainless 304 or 316 quality material, as required by customer. Maximum care has been taken to ensure safe operation of Double Cone Blender. Manual rotating facility with hand wheel for inching. The same will be provided with ss cover & limit switch. ( In 200 Kgs. & above model ) Two nos. of safety road will be provided at back side. ( One LH side & one RH side ) Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning. One shaft with 04 nos. of fixed buffels with mirror polished provided inside the cone. Cones of the Double Cone Blender will be mirror polished from the inside & outside & structure will be matt polished. All moving parts of the Double Cone Blender are covered with SS304 covers. Safety guards made from SS304 pipes provided in front of the m/c with limit switch. Panel fabricated from SS304 material with facility of three phase indication, D.O.L. tarter, digital timer & Amp. Meter. As per customer requirement machine will be provided with left side drive or with right side drive. The conical shape at both ends enables uniform mixing and easy discharge. All contact parts of the Double Cone Blender are made out of SS304/316(as per customer requirement) quality material. Maximum care has been taken to ensure safe operation of the unit. Worm reduction gear use for speed reduction. Food grade rubber gasket will be used on both end of cone as well as in butterfly valve. Inside & outside of the cone will be polished to the mirror finished. General structure made out of SS304 and Polished to the matt / mirror finish ( as required by you ) in GMP Model. All safety guards & covers made out of SS304 in GMP Model of Double Cone Blender. Hand wheel will be provided for manual tilting of cone. Safety guards provided with limit switch to not start the machine when safety guards are not in proper position.

It is made in round or square hole mounted with sheet along with mesh pressed in between. These have friendly user design and are extremly easy in operation and maintenance.

• Brand Name: Unisource Packaging
• Country of Origin: Made in India
• Usage/Application: Pharmaceutical Industry
• Operation Mode: Semi-Automatic

• Brand Name: Fabtech
• Country of Origin: Made in India
• Machine Type: Automatic
• Capacity: As per requirement
• Automation Grade: Automatic
• Is It Customised: Customised
• Is It Rust Proof: Rust Proof
• Usage/Application: Pharma
• I Deal In: New Only

• Color: Blue/White
• Tray Type: Disposable
• Capacity(Capsules/Hour): Upto 3000 Capsules/Hour
• Shape: Rectanglular
• Model Number: PPCT-02
• Operation Mode: Manual Capsule Filling Machine
• Usage/Application: Capsule Powder filling
• Material: ABS

We offer Octagonal Blender.

We are leading manufacturers and suppliers of all types of pharmaceutical, chemical processing equipment.

• Weight: 400-500kg
• Voltage: 230V
• Power Source: Electrical
• Application: Industrial
• Automatic Grade: Automatic
• Power(W): 1-5kw
• Heaters: 'u' Type Tubular Heaters are Provided Inside the Chamber for Maximum Heat Transfer. Steam Heated Models are Fitted with Finned Type Steam Radiators.

  Features : Applications : Tray Dryers are ideally suitable for drying chilies, spices, papads, potato chips, onions, fish, garlic, grapes, cashew nuts, confectionery, macaroni, wood etc. It is also for used for drying pharmaceuticals, chemicals, powders, granules, plastic granules etc. Heating is either by electric or steam or both combined. Various models are listed in this leaflet to suit customer requirements. Custom-built models can be quoted on request.  Construction : The external frame work is made of thick gauge M. S plates both the exterior made of thick gauge CRCA sheets or AISI 304 sheets. in between the space, resin bonded special quality fiber glass heat insulation slabs are provided. safety guards for fan blade & heaters are provided. The interiors is painted with heat resistant aluminum paint. The exterior is spray painted with silver gray gloss paint, Inner Chamber - CRCA or AISI 304, Outer Chamber - CRCA or AISI 304. Fan & Motor : According to models doors are provided with smooth moving hinges, latch catch & sealing gaskets. Well balanced large propeller type fan (S) fitted inside the chamber with suitable shaft & dual bearing with Electric motor (S) drive. Controls Panel : Control Panel box consists of contactor assembly, On & Off switch, Digital Controller neon lamps, operating push buttons are incorporated in the control Box. Damper : Adjustable exhaust Damper with an arrangement for pre-filtration, in the air inlet. Optional : GMP models / complete S.S unit. Trolleys & Trays supplied as per requirement. Microprocessor based temp. Control with printer interface (Centronic PC interface with RS 232 CPC / RS-485 for networking of controllers. Profile controller for Ramp / Soak cyclic applications. Safety Features : Built-in temp. deviation audio visual alarm. Safety thermostat for over shoot temp. cut off circuit to cut off the whole systems in case of malfunction. (only applicable to Microprocessor based models). Validation : IQ OQ PQ & DQ Protocols with complete documentation & certification traceable to National & international Standards. Steam Heated Models : These are provided with finned tubular steam coils instead of /in addition to heaters, along with solenoid valve.

• Voltage: 280 V
• Operation Mode: Automatic
• Capsule Type: DB, Tamper Proof, Vegetal, Elongated, Special
• Body Material: SS
• Automation Grade: Semi-Automatic
• Driven Type: Electric
• Motor Power: 2 HP

The dryer is ideally suited for use for drying pharmaceutical chemicals, powders, pigments, plastic granules, agricultural products like drying chillies, spices, papad, potato chips, onions, fish, garlic, grapes, cashew nuts, confectionery, macaroni, wood etc. The dryer is made out of angle frame; doubled walled from CRCA mild steel, thermally insulated with 3 inch thick glass wool between the walls. Inner body is finished with heat resistant aluminium paint, outside in grey hammer tone. The dryer is electrically heated with sheathed tubular heaters and fitted with fan run by belt driven drive unit or steam heated with digital temperature control.

The Bottle Unscramble Unit has been specifically designed to reduce man power and increase the productivity of a plant. The Techno-Unscrambler Unit 100-H, ideal for round and oval bottles consists of 6 major stations. The Process: The bottles are first dumped manually on to the Hopper The bottles are then moved to the rotary conveyor through the transfer conveyor at regular time intervals The rotary bottle feeder then continuously moves the bottles onto the intake conveyor of the unit The bottles then pass through the 2-orientation stations wherein they get oriented based on their shapes and filling station requirements A transfer system is then used to transfer the bottles from the unscrambler exit conveyor to the filling machine intake conveyor

Multimill is ideal for millingcrushing of products lumping after drying wet granulation.

• Size: Standard
• Type: Condoms, Flavored Condoms
• Packaging Type: Cartoon Box, Plastic Packet
• Brand Name: OWN BRAND
• Material: Latex Rubber
• Color: Creamy, Green, Pink, Red, White
• Feature: Comfortable, Extra Thin, Flexible, HIV Protective, Nice Aroma, Skin Friendly, Stretchable
• Flavor: Aloe Vera, Chocolate, Grapes, Pineapple, Strawberry, Vanilla
• Certificate: ISI Certified

We are main supplier of this product.

Suitable for 24 Trays of size 32" x 16" x 1¼" loaded on fixed angles. DRYING CHAMBER: Double walled construction with insulation in between. With one door. Outside body fully welded, step less with rounded edges and corners. Inside body fully welded with rounded edges and corners to maximum extent. DOORS: Single door with Double walled construction with insulation in between. Heavy Hinges Handle for opening and sparkless locking. AIR RECIRCULATION: Two coaxial fans driven by common Flame proof motor through “V” belt and pulleys.Air inlet with micron filter. Exhaust with adjustable damper. HEATING: By finned tube radiator with square meter heat transfer area Suitable for either steam hot water or thermic fluid and By KW Electrical heaters ESCORT’ brand Electrical heaters. M.O.C: A) All internal and air contact parts like inside wall of chamber, inside wall of door, radiator, recirculation fan, fan shaft , safety grids, exhaust damper, etc in S.S. 304 quality. B) All external, visible and non contact parts like outside wall of chamber, outside wall of door, Hinges, handle, door lock, drive support, drive cover, control panel cover, bottom supports, etc in S.S. 304 quality. C) Gaskets for door, damper, filter, explosion flap food grade silicone rubber. D) Insulation LRB SAFETY: A) Aluminium explosion flap on rear wall. B) Safety covers for drive assembly. C) Door limit switch interlocked with recirculation fan.

Pharmaceutical Machinery, Fruit Juice, flour grains, Aloe Vera Juices

Blister Sealing Machine

sildenafil softgel capsule, Plastic packaging Products, Blister Packaging

Pharmaceutical Machinery

Pharmaceutical Machinery, liquid milk processing plant

Pharmaceutical Machinery, Bulk Drugs, calcium levulinate

Pharmaceutical Machinery, chemical equipments, sugar machinery

Pharmaceutical Machinery, Dairy Equipment, pure water manufacturing equipment

Pharmaceutical Machinery, Wooden Book Stand, Memo Pad, Candle Stand

Pharmaceutical Machinery

Pharmaceutical Machinery

Pharmaceutical Machinery

Hopper Dryer & Loaders for Pharmaceutical Industries

Pharmaceutical Equipments, Sanitary Centrifugal Pump, Zero Dead Leg Valve

Pharmaceutical Machinery

Pharmaceutical Equipments, Stainless Steel Pumps, ice tube machines