Portable Autoclave Dealers in Mumbai

Applications: Standard portable autoclaves are ideal for all applications requiring routine total destruction of all living organism.Ideal for Doctors, Primary Health Centres and also as a stand by unit. Advantages: A seamless (joint less) body provides a sturdy and tension free Autoclave which can safely be operated repeatedly even in remote places. Automatic purging for efficient sterilization. Comes with an additional Safety Valve for added safety. Die pressed seamless body of stainless steel Hydraulically die pressed lid from stainless steel plate. Supplied with Stainless steel dressing drum and X stand.

Model : HIPL – 001 A :  Single body made of heavy gauge S.S. LM-304 grade buffed & polished to mirror finish.  Lid made of thick S.S. with argon-welded joints.  Pressure upto 22 PSI factory set at 15 PSI.  Complete with pressure gauge, safety valve, and steam release valve.  Unit works on 230 V Ac, 50 Hz. Supply.   Optionals :  Digital Temperature Indicating Controller with suitable sensor Factory set at 121oc [ 15 PSI ]  Perforated Basket made of S.S. LM-304 grade Description :  Double body construction,  single chamber for steam and water, covered externally by outer shell.  Lid made of thick stainless steel, pressure upto 22 PSI factory set at 15 PSI.  Complete unit with automatic air purging, Digital Temperature control & Indication with 0.1°c Accuracy/ Resolution, with electronic Digital timer range 0 to 99 min.  Autoclaving time cycle automatically starts when set pressure is achieved.  Automatic steam release once autoclaving cycle complete.  Complete with pressure gauge, safety valve, steam release valve, extra safety valve.  Incorporated with an Automatic Pressure Control Switch as an additional safety device.  Low Water level cut-off : Low water level cut-off assembly connected to heater which automatically cuts off power to heater if water level is not sufficient thus eliminating heater burn outs.  Foot lifting arrangement included for Capacity 125 Ltr. and above. Not included/required for lower sizes.  Provided with S.S. L-304 grade perforated basket.  Unit works on 230 V Ac, 50 Hz. Description :  Double body construction,  single chamber for steam and water, covered externally by outer shell.  Lid made of thick stainless steel, pressure upto 22 PSI factory set at 15 PSI.  Complete unit with automatic air purging, Digital Temperature control & Indication with 0.1°c Accuracy/ Resolution, with electronic Digital timer range 0 to 99 min.  Autoclaving time cycle automatically starts when set pressure is achieved.  Automatic steam release once autoclaving cycle complete.  Complete with pressure gauge, safety valve, steam release valve, extra safety valve.  Incorporated with an Automatic Pressure Control Switch as an additional safety device.  Low Water level cut-off : Low water level cut-off assembly connected to heater which automatically cuts off power to heater if water level is not sufficient thus eliminating heater burn outs.  Foot lifting arrangement included for Capacity 125 Ltr. and above. Not included/required for lower sizes.  Provided with S.S. L-304 grade perforated basket.  Unit works on […]

Applications: Standard portable autoclaves are ideal for all applications requiring routine total destruction of all living organism.Ideal for Doctors, Primary Health Centres and also as a stand by unit. Advantages: A seamless (joint less) body provides a sturdy and tension free Autoclave which can safely be operated repeatedly even in remote places. Automatic purging for efficient sterilization. Comes with an additional Safety Valve for added safety. Die pressed seamless body of stainless steel Hydraulically die pressed lid from stainless steel plate. Supplied with Stainless steel dressing drum and X stand.

Portable Steam Autoclave SS Seamless diepressed deep drawn chamber μp based PID controller with dual display for Temp. & Time R & D CENTERS Fully SS Construction  

Portable autoclave, An Autoclave is a device to sterilize equipment and supplies by subjecting them to high pressure saturated steam at 121 °C or more, typically for 15-20 minutes.

We are the manufacturers of all types of vertical autoclave for industrial and research institutes situated at Dombivli - Thane, Maharashtra.An essential requirement for general laboratory use, the top cover seals the portable autoclave with neoprene rubber gasket and is clamped to the lower tank by wing nut closing system. Inner chamber of portable autoclave is made of stainless steel fitted with pressure gauge up to 20 psi. The unit has spring-loaded safety valve for pressure adjustment and a dead weight safety valve. It is hydraulically tested up to 40 psi and is supplied with electric fitting, cord and plug to work on 220/230 volts A.C. This portable autoclave supplied complete with tripod stand.

EQUITRON Standard portable autoclaves are ideal for all applications requiring routine total destruction of all living organism. Ideal for Doctors, Primary Health Centres and also as a stand by unit.EQUITRON Advantages: • A seamless (joint less) body provides a sturdy and tension free Autoclave which can safely be operated repeatedly even in remote place • Automatic purging for efficient sterilization • Comes with an additional Safety Valve for added safety.• Die pressed seamless body of stainless steel.• Hydraulically die pressed lid from stainless steel plate.• Supplied with Stainless steel dressing drum and X stand 

Portable Autoclave Applications: Standard portable autoclaves are ideal for all applications requiring routine total destruction of all living organism.Ideal for Doctors, Primary Health Centres and also as a stand by unit. Advantages: A seamless (joint less) body provides a sturdy and tension free Autoclave which can safely be operated repeatedly even in remote places. Automatic purging for efficient sterilization. Comes with an additional Safety Valve for added safety. Die pressed seamless body of stainless steel Hydraulically die pressed lid from stainless steel plate. Supplied with Stainless steel dressing drum and X stand.

GMP - GC - 29 portable autoclave is a reliable and convenient method for steam and sterilization of medical equipments. The unit is a single walled SS - 304 (heavy gauge) structure with high gloss finish with argon welded finish. The lid is heavily polished and fitted with a pressure gauge, steam exhaust valve, safety valve and handle and can withstand a pressure of 15 Lbs Sq. inch. The unit is also equipped with an ISI marked special heater which is easily replaceable, & SS basket.

Make Equitron standard portable autoclaves are ideal for all applications requiring routine total destruction of all living organism. Deal for doctors, primary health centres and also as a stand by unit A seamless (joint less) body provides a sturdy and tension free autoclave which can safely be operated repeatedly even in remote places. Automatic purging for efficient sterilization comes with an additional safety valve for added safety.Die pressed seamless body of stainless steel. Hydraulically die pressed lid from stainless steel plate.Supplied with stainless steel dressing drum and x stand. EQUITRON Standard portable autoclaves are ideal for all applications requiring routine total destruction of all living organism. Ideal for Doctors, Primary Health Centres and also as a stand by unit.

Portable Autoclave, Water Still, Laboratory Oil Bat

Applications: EQUITRON Standard portable autoclaves are ideal for all applications requiring routine total destruction of all living organism. Ideal for Doctors, Primary Health Centres and also as a stand by unit.     EQUITRON Advantages: A seamless (joint less) body provides a sturdy and tension free Autoclave which can safely be operated repeatedly even in remote places. Automatic purging for efficient sterilization. Comes with an additional Safety Valve for added safety. Die pressed seamless body of stainless steel. Hydraulically die pressed lid from stainless steel plate. Supplied with Stainless steel dressing drum and X stand.