PTFE Tape Dealers in Mumbai

PTFE thread seal tapes can be used as a sealant in all types of threaded pipe materials like iron, steel, copper, aluminum, special steel, plastics including PVC pipes. Apart from these, the most important characteristics of PTFE tapes to be used as a thread sealant are the tensile strength properties and the density. Performance of the tape is determined by the balance of tensile strength and elongation between the longitudinal and transverse directions & the percentage elongation at break in the transverse direction. Good drape is the ability of the thread seal tape to conform closely to the pipe threads without tearing.  

PTFE Tapes are designed for most plumbing and pipe fitting. They are available in a variety of widths, lengths and thickness, in standard, medium, high density and Color coded Premium PTFE Thread Seal Tapes are also available for specialized applications.   12.5mm Width x 0.7mm Thick x 12 Meter Long 19mm Width x 0.7mm Thick x 12 Meter Long 25mm Width x 0.7mm Thick x 12 Meter Long

PTFE Thread Sealant Tape, due to the special nature of the thread seal will be lasting and resistant to high temperatures and corrosive chemicals.The seal will not harden or become brittle but will remain flexible enough when the seal is opened for maintenance.PTFE Thread Sealant Tape can be used for various media from corrosive chemicals to water and gas to oil, in hydraulics and pneumatics.

TFE Gasket Tape is a kind of dynamic seal. It is produced by braiding together, continuous tape of expanded PTFE. It has following qualities Extremely low coefficient of friction Non abrasion Excellent sealability Outstanding chemical resistance Does not hydrolyze Does not harden Temperature -160°C - +280°C Applications : PTFE gasket tape can be used in virtually all types of sealing applications throughout the industry.

We are counted among the prominent Yellow Release PTFE Teflon Sealing Tape Suppliers in Mumbai. We offer superior grade PTFE Teflon Sealing Tape that are manufactured by well-renowned international firms. The PTFE Teflon Sealing Tape that we offer are used in Sealing of Plastic LD and HD Bags/woven sacks bags. Our yellow release PTFE Teflon Sealing Tape is used in packing and sealing of pouches. They are available in properly sealed cartons of various quantities. It is highly durable and the capability to withstand high degree of temperature. The prices of our PTFE Teflon Sealing Tape are highly reasonable. Sizes Avilable Thickness : 5ml Width : 12mm to 75mm Length : 10 Mtrs. Also, 50Mtrs Jumbo is available.

Petrorays Brings to you, PTFE coated fibre Glass is coated on one side with high temperature resistant pressure sensitive silicone adhesive. These adhesive tapes can withstand temperature resistance upto 260oC. These Tapes are used in sealing of polymer film in FFS, Impulse sealer Band Sealer, & bags making machine. We are manufacturers and suppliers of teflon coated fiberglass tape in Mumbai, India to all over the world. Applying PTFE COATED TAPES on the heating element allows the heat to transfer and fuse the plastic without the plastic sticking to the heating element ensuring a permanent seal. This tapes withstands temperatures up to 260oC and serves as an excellent anti-stick surface where the requirements are stringent. Petrorays offers OSA (One side Adhesive) tapes in various sizes. We also have fabrics & Tapes which gives impression on the sealing area. Petrorays can also offer Premium grades of Adhesive tapes which are specially used in Oil & Ghee packings.   Application   PACKAGING INDUSTRIES: Manufactures of Poly Bags. Ghee, Milk, Bread, Biscuits, confectionary and Dairy & soap products. Laminating shoe inner soles. High frequency welding of PVC/HDPE pipes, wide width plastic tarpaulins. Storage and canal lining. PLASTICS INDUSTRIES: Release fabric in hot plate welding of plastics. Release fabric for H.F. and I.R. Welding, PE & PU extrusion coatings, welding of polythene bags. Excellent release cloth, when molding resin bonded laminates. TEXTILES INDUSTRIES: Covering drying cylinders to avoid sticking Laminating fabrics and PU Foam. Collar fusing. CURING INDUSTRIES: Belts for profile curing of extruded rubber. Belts for curing of PVC, PU & PE products. Process belts for curing and impression of PVC backed carpets. Release belts for curing of hot melt adhesives and adhesive tapes, abrasive wheel discs. FOOD INDUSTRIES: Release fabric for baking dough and meat. Belts for baking & cooling biscuits, breads and confectionery. Process belts for frying, drying and curing of meats & snacks. Release tapes for vertical FFS machine and vacuum packing. CHEMICAL , ELECTRICAL / ELETRONIC INDUSTRIES: Protective curtains in process plants limiting splashing and fumes. For gaskets & membrane. Protective clothing and aprons. Release sheets used in laminating printed circuit board. Belts for drying ink & solders on PCBs. PRINTING INDUSTRIES: Belts for UV dryer for drying printed ink on card, paper, board. Metals, T-Shirts, glass, plastic parts.. Belts for drying ink & solders on PCBs. Colour masking on four colour off-set printing machines.   Guidelines For Affixing Tapes   THIS GUIDE IS BEEN SUBMITTED FOR OPTIMUM LIFE OF THE ADHESIVE TAPES SURFACE PREPARATION : Clean the roll/bar/sheet/rod etc. where you want to stick the tape with dry cloth or zero number Sand paper. Remove all dirt, grease, carbon etc. Gently rub the surface with the solvent such as acetone, methyl ethyl ketone (MEK) etc. and see that the roll/bar/sheet/rod etc. is dry, clean & slightly rough. EVEN A SLIGHT OIL OR DIRT LEFT ON SURFACE CAN IMPAIR ADHESION STRENGTH. Applications : Open release paper (yellow corrugated) from one side & start to stick the tape with thumb pressure. Open only about 2" to 4" initially. Again open release paper a little bit & stick adhesive tape on the surface. This will help avoid air bubbles. Stick in such a manner that you do not have to ply off the tape for minor adjustments. In other words stick correctly the very first time. If air bubbles are entrapped remove by rolling a round rod`

ZERO LEAKAGE CLEAN & EFFECTIVE "Champion" PTFE Thread Sealant Tape, due to the special nature of the thread seal will be lasting and resistant to high temperatures and corrosive chemicals. The seal will not harden or become brittle but will remain flexible enough when the seal is opened for maintenance. "Champion" PTFE Thread Sealant Tape can be used for various media from corrosive chemicals to water and gas to oil, in hydraulics and pneumatics. Instructions for proper usage Wind the tape by hand, using a constant minimal tension sufficient for the tape to take up the form of the thread. The tape should be wound in a helical fashion with a 50% overlap (as shown in the diagram) in the direction of the thread so that when the connection is completed the finishing end of the tape remains in position. The tape width should not exceed the length of the thread form. 

We are offering ptfe tape. “yogdeep” ptfe tape: standard sizes: width: 12.5 mm to 25 mm (12 inch to 1 inch) length: 12 mtrs thickness: 0.075 mm unsintered pure ptfe in tape form is the standard material for sealing threaded joints and connections. Joints can be taken apart long afterward without any trouble. It is virtually a universal sealing material which can be used on pipes of galvanized iron, rubber, copper, plastic brass, aluminium, stainless steel, ceramic, monel, carbon etc. the inherent plasticity of ptfe allows it to extrude into the irregularities of the thread, so filling any voids or passages. It is inert to acids, solvents oil, etc. And will not contaminate the liquid being handled.

Plumb Pack" Brand PTFE Thread seal Tape is an ideal seal material. The PTFE Threaded Tape are manufactured according to International Standards & Specifications. All the manufacturing processes arecontrolled as per the ISO 9001:2000 Quality Control Systems. The "Plumb Pack" Tm Brand PTFE tapes are confirmed to American UL and Japanese JIS standard. PTFE Thread Sealant Tape, due to the special nature of the thread seal will be lasting and resistant to high temperatures and corrosive chemicals. The seal will not harden or become brittle but will remain flexible enough when the seal is opened for maintenance.