Back Back
Wire Tension Measurement System
Product Brief Online Tension Measurement System For Wire, Strip, thread, rope, Cable, tube, fiber, rod and such similar products. Why Industry need it ? There is direct indirect impact on product quality with tension variation beyound certain limit. The process like extrusion, stranding, bunching, twisiting, rewinding, coiling, weaving, coating, inspecting, drawing, enamabing or similar where the running product is passing through some process. which directly impact on quality of process and product as well machine performance. Hence the end product quality is been compromised inspeite of willingness to give best quality product by the industry. Solution: with the help of experiance in the field over 25 years with feedback and strong support from industry Puretronics is able to introduce Tension Measurment System. which is useful in various application. in continuous production processes the quality of the material tension thus improving finished product quality, reducing waste, increasing processing speeds, and minimizing machine effcuency and low downtime. An Application which can benefit greatly from tension measurment and control inculding Drawing, Steanding, Bunching, Extrustion, Inspection Rewinding, Coiling Weaving, Rope making Shielding, Coating, enamabling Unwinding decoiling
Brand Name : PURETRONICS
Specialities : Choice of mounting to suit specific location,Highly precisied digital tension indicator with analogue output
...more
Tension Indicator
70,000 Per Piece
1 Piece (MOQ)
Sincos Encoder
Industry 58mm Standard Size,Robust mechinical and electrical construction,Protection to IP65,12 Bit Gray Coded SSI,Feedback Encoder for Servo Motors,Feedback Encoder for Lift Motors,Commutation Signal,Shaft Fixing from Back Side
...more
Slitting Machine Drive System
We are engaged in manufacturing & supplying slitting machine drive system. With high speed slitting, these machines also offer inspection facility of various labels which are printed on packing materials. If a label is found missing, the machine automatically stops at the spicing table. With cost competency, these are useful for packing industries.
...more
Variable Data Inspection machine
Sentinel can fully scan and acquire all web width in order to analyze the page width and length for any page printed, verifying print quality and page contents: Imagepattern, barcode, data-matrix, OCR and other special verification functions.
...more
WEB TENSION LOADCELL
These load cells are designed to be mounted directly onto the ends of the tension measuring roll and are able to indicate with high precision the resultant tension forces being applied. The commercial success of this model, designed for tension control with laminates, is due to the combination of its compact size which allows its use in confined spaces, and it’s very high level of quality and reliability.
...more
Round Load Cells (Model No. - AR-125-100-25)
AR-125-100 load cell can be used for through shaft assembly application. Mounting kit data are indicated in the table below. These load cells measure the applied force, and give an electric proportional signal, repeatable and free from hysteresis, which can be used for any kind of regulation
...more
Rotogravure Machine Auto Registration Control System
The Printing industry is a day to day market, Automation in this field is now noticed by the user for the quality of Printed material. Which is not possible without the upgraderation of the system & with ARC system. This will give results of International quality of printing & give the user an edge our the competition. CRS-2002 Gravure printing system adopted high speed build in MCU which is most advanced in current time, high capacity flash Rom chipset, Onsite bus, fiber sensor, window application software for high technology production .
...more
Roto-gravure Printing Machine
PURETRONICS have specially developed Five Motor Drive System for Rotogravure Printing Machine, which includes of Unwinder Auto Web Tension Regenerative A.C.D.C. Drive, Main A.C.D.C. Motor Drive, Outfeed NIP Roll A.C.D.C. Drive, and Rewinder Auto Web tension Control A.C.D.C. Drive. Load cells OR Two - Dancer Roll Assemble, Tachogenerator, Encoder are used to get Perfect, Reliable and very Easy Operating System with Tension control, specially for Rotogravure Printing Press, Lamination Machine etc. Each Motor Drive is designed as a Single Card function for Easy Maintenance and Cost Effective The Master Control Pot varies the speed of the Machine.The web tension remains same irrespective of variation in Web speed, which plays very important role in Colour Registration.
...more
Full Vision Print Inspection System
SPECTRO vision systems are able to control the 100% of the decorated surface and to detect the typical defects produced during the printing process. SPECTRO systems have been specifically studied to control the 100% of the production directly on the production line. SPECTRO is specific for aluminium or plastic tubes, caps, cans and each cylindrical objects. Normally it is collocated on the printing machine, inside a unit where it is possible for the tube to be in rotation and where a rejection system for the defected tubes could be carried out.
...more
SCADA Based Control System
We offer high performance PLC Drive control panels considering the priority of client for demanding automation at every step in industries and replacing the old relay logic and availability of support.
...more
Offset Printing Machine Control Panel
Offset printing is a commonly used printing technique in which the inked image is transferred (or "offset") from a plate to a rubber blanket, then to the printing surface. When used in combination with the lithographic process, which is based on the repulsion of oil and water, the offset technique employs a flat (plan‐o‐graphic) image carrier on which the image to be printed obtains ink from ink rollers, while the non‐printing area attracts a water‐based film (called "fountain solution"), keeping the non‐printing areas ink‐free.
...more
Ceramic Anilox Roll
It features an excellent performance such as abrasion and erosion resistance, stable print quality, long effective life time, low composite cost with the first-class quality in the world. The cells are characterized of chiseled shape, smooth cell wall, for flexible printing requirement, and is to clean.
Features : Wide Flexo Press,Narrow and Lable Llexo Press,Corrugation Paper Printing machine
...more
Load Cell
Puretronics presents LOAD CELL for various automation applications to cover most of the automation in converting or process machines. The range of Load cell produced by Puretronics satisfy all demanding applications and can be used for measuring the tension value of all materials including paper, cardboard, plastic film, foil, rubber and wire. �Precision measurements of web tension is essential to ensure consistent product quality and to maximize productivity Different models are available to meet the requirement like Flat type, Round type and Round Hollow type. �Pure� series of tension sensors are full bridge, strain-sensitive load cells, with built-in self-aligning bearings that make them suitable for dead shaft or live shaft applications. These are generally used in pairs to support tension sensing idlers on either ends. Standard ratings cover a range from 10 kg to 2000 kg in different sizes. Adaptable for base or flag mounting.
...more
Laser Diameter Gauge Upto 150 MM
Puretronics Introduces Non-contact Laser Diameter Gauge and Online Controller In Collaboration With European Company. On-contact Measurement Technique Enable You to Stabilize Your Extrusion Process, Especially for Cable Production Lines. It Reduces Waste, Reduce Manpower, Save Raw Material, And Ensure Product Quality. It Is Easy To Setup And Use. It Is Made Of Aluminum Housing For Durability Even In Rugged Production Environments. It Is Insensitive To Product Vibration And Movement.
Feature : High & Low Value Alarm, Out Of Range alarm, Alarm On -Off Selection.,High accuracy, low drift measurements.
...more
Inline Induction Wire Pre-heater
nline induction wire preheater is used to heat the wire prior to extrusion coating processing etc. ideally suitable for Cable and Wire Industry. It improves the adhesive coating of Insulating material on conductor as the temperature of the conductor remains same throughput the run and the heat flow is even through out the wire to assure that no cold patches occur at the any line speed hence avoid the wastage of costly raw material gives high quality and product and higher product speed. It works on electrical inductive resistance heating principle assure no current flow to other wire line equipment. The heat on the wire is applied evenly at all the operating should regardless of wire diameter. A sold state thyristorised control with line speed Encoder feedback provides correct secondary voltage as per desired setting. It also eliminates wire burn out during stoppage. Line Voltmeter Power ON Heating on indication is provided with Auto Manual selection and heating potentiometer for easy operation and quicker setting. Current limit circuit protects the Preheated Coil from overloading. The entire unit is self-contented Powder coated with glass window cabinet and doesn't require any foundation footing
...more
High Voltage Tester
3 Pin System of Live, Neutral And Earth. Ensure Proper Earthing at your end.,MCB,Zero Interlock Provided,Fast acting tripping Device
...more
High Frequency Spark Tester Bench Model
We manufacture Spark Testers for extrusion and rewind lines to check for defects in cable insulation. Cable passes through in a high-voltage bead chain electrode in the spark tester, and any insulation fault causes a spark from this electrode to the ground via cable core. Any spark is detected by spark tester electronics and registered as a fault. By using spark testers at your extrusion or rewind lines, you can monitor your cable product. If there is any fault in cable insulation, the spark tester will warn you by its alarm and you can search the possible cause and fix the problem, so you get product without any faults.
...more
print defect detection system
Higher Processing Speed 60MHz Reconstructed Algorithms for Improved Detection Regions of Intereset (ROI) - Area Sensitivity can be specifieAutomatic Print Pattern Synchronization & Position Correction Colour Difference Judgement - detection of color changes Periodical Defect Judgement - Detection of repeating defects Web Monitor Viewer - upto 4 selectable area within a repeat providing web view of selected area with digital zoom Fullwidth web capture for esy setup of lanes (upto 32 lanes)
Feature : For web widths from 500 to 2500mm
...more
Pillow Load Cells
Under Pillow Block (UPB) series load cells are of sealed construction, designed for demanding industrial applications Suitable for live and driven shafts. Ideal for high tension, high speed applications.
...more
Dual Axis Laser Micrometer
492,000 Per Piece
1 Piece(s) (MOQ)
Color : Blue
Brand Name : Puretronics
Application : Power Cable
...more
Defect Detection System For Plastic Caps
Qualiplast caps inspector system originally designed to check quality of plastic caps and more generally of closures up to a maximum production rate of 1,200 pcsmin by using up to five matrix cameras.
...more
Defect Detection System For Aluminum Caps
FALCON EYE (Aluminium Caps Inspector) is an Italian Artificial Vision system for the inspection of aluminium closures to detect the typical defects of this kind of production. This device is placed at the end of the production line, before packing the caps. The inspection is performed while caps properly conveyed on a conveyor belt. The shell-border and the liner are inspected with a top view. The top-printing (public side) is inspected with a bottom view through a hole in the plate that supports the starwheel, while the cap is kept in the star’s pocket by a rubber belt.
Feature : To perform fast & reliable inspections without forgetting the ease of use. ,System has much higher life of illumination system.
...more
QualiPrint Code Reader
QualiPrint - Code Reader - is the innovative line of products dedicated to Bar Code, Data Matrix, OCV (verification of codes) and OCR analysis (reading of codes), for reading andor verification of conformity and congruence of alphanumeric codes, of bar codes and data matrix, printed as “variable fields” on a wide range of products. Particularly with QualiPrint is possible to read and verify the correctness, for instance, of the code number of Your products, directly after the generation of the codes, and therefore to eliminate the problems connected with products with non legible data! Optical Character Recognition and Verification (OCROCV) tools enable Vision Inspection Machine to read, verify, and inspect alphanumeric text in a variety of applications. From human-readable text to bar code data matching and serial code verification on labels and packaging, Vision Inspection Machine with OCROCV tools deliver the capabilities necessary for machine “literacy
...more
Online Wire Resistance Meter
The device works according to the proven 4-wire measurement method which eliminates errors caused by test lead and contact resistances. Thermo voltages that might be in the measurement circle would be compensated automatically by this measurement method. The control of the measurement leads is done with an integrated cable fraction detection. A temperature compensation for any given sample material such as copper, aluminium, tungsten, etc. is self-evident. The temperature measurement is done by an external Pt 100 sensor or by an external infrared measurement device (ref. to accessories). A special measurement voltage input protection was developed for testing large inductive samples so that voltage peaks do not cause permanent damage while pinching off the sample. 16 device settings such as the measurement range, limit values, temperature coeffi cient, etc. can be saved in order to test samples with different parameters in an automatic measurement system. All device specifi c settings are shown to the user via display. Calling up the settings is done via keypad or via PLC interface with a bit pattern (4-bits). It goes without saying that all device settings may also be effected via the RS232 interface.
...more
Restoration Preservation
Reviews & Ratings
Write a ReviewBe first to Rate
Rate ThisOpening Hours
Share your Correspondence Details to receive messages from Puretronics
