Raj Electrical Works Bhuleshwar, Mumbai, Maharashtra

Welding methods: d.c constant current tig welding, manual arc welding. The machine is multipurpose and above money worth. Applicable material: stainless steel, low carbon steel, high strength steel & cr-mo steel, copper, titanium, etc. scope of appliance: petro-chemical industries, pressure vessel, electrical construction, stainless steel products, aerospace boilers, nuclear power, electrical constructions, industrial installations & other industries excellent working performance: machine with dual welding method mma with good dynamic characteristics less splash & stable arc. Easy to control welding fusion with nice weld. High pressure arc hence argon welding is easy to operate. perfect protection system: automatic protection for under voltage, over voltage, over current, over heat & over load. Automatic protection for open phase current for 3 phase machine. additional features: i) the machine emc (electro-magnetic compatibility function) with powerful grid filtering ability to reduce power supply contamination. The internal circuit & components are well protected by excellent interference design resulting in more stability and better reliability. Ii) the machine is equipped with power & voltage compensation device within the power voltage is fluctuates during working + 15% of rated voltage the machine works without being affected. Input power voltage (v) - ac220v input frequency (hz) - 5060 rated input current (a) - 30 non-load voltage (v) - 56 output current range (a) - 10-250 rated output voltage (v) - 20 rated duty cycle - 60 load loss (w) - 40 power factor - 0.73 insulation class - f protection class - ip21 weight (kg) - 10 size of the machine (mm) - 371x155x295.

Welding methods: d.c tig welding and a.c tig welding applicable material: stainless steel, low carbon steel, high strength steel & cr-mo steel, copper, titanium, etc. Welding aluminium & aluminum alloys products under a.c functions advance technology: i) a.c wave balance control continuously adjusts electro-negative (en). Lesser amount of en increase the cleaning action to remove aluminum oxide while greater amount of en increases the penetration ii) a.c frequency control is also continuous adjustable and enable narrow focused that helps to direct the arc at the root of the joints in filling of welds frequency controls improve weld in aluminum welding results. Additional features: i) the machine emc (electromagnetic compatibility function) with powerful grid filtering ability to reduces power supply contamination. The internal circuit & components are well protected by excellent inteferance design resulting in more stability and better reliability. Ii) the machine is equipped with power & voltage compensation device within the power voltage is fluctuates during working + 15% of rated voltage the machine works without being affected. Input power voltage (vac) - ac 220v+15% rated input current (a) - 5060 non-load voltage (v) - 43.5 current adjustment (a) - 44 rated output voltage (v) - 20-220 duty cycle (%) - 20 method of striking arc - 60 high frequency - high frequency efficiency (%) - 80 power factor - 0.73 insulation grade - f protection grade of shell - ip21 arc striking current (a) - 10-315 arc ending current (a) - 10-315 gas-pre blow time (s) - 0-2 weight (kg) - 24 size of the machine (mm) - 498x328x390.

Welding methods: d.c constant current tig welding pulse, d.c tig welding and manual arc welding. Applicable material: stainless steel, low carbon steel, high strength steel & cr-mo steel, copper, titanium, etc. Additional features: i) 4t controlling capability used for long welding line operations. It reduces the labor intensity for the welders ii) 4t automatic controlling functions on shut down with intelligence design to prevent futile operations iii) the machine emc (electromagnetic compatibility function) with powerful grid filtering ability to reduce power supply contamination. The internal circuit & components are well protected by excellent interference design resulting in more stability and better reliability. Iv) the machine is equipped with power & voltage compensation device within the power voltage is fluctues during working + 15% of rated voltage the machine works without being affected. Input power voltage (v) - ac220v input frequency (hz) - 5060 rated input current (a) - 23 non-load voltage (v) - 56 output current range (a) - 10-180 rated output voltage (v) - 17.2 rated duty cycle - 60 load loss (w) - 40 power factor - 0.73 insulation class - f protection class - ip21 weight (kg) - 8.8 size of the machine (mm) - 371x155x295.

Welding methods: d.c constant current tig welding pulse, d.c tig welding and manual arc welding advance technology: i) inverter frequency is up to 100khz.efficiency is 80% small no load loss. Ii) infinity variable control, portable, economical & stableexcellent working performance: machine with dual welding method. Mma with good dynamic characteristics less splash & stable arc. Easy to control welding fusion with nice weld. High pressure arc hence argon welding is easy to operate it has high frequency booster circuit arc & thermal arc. It has high rate of success ratio with good spot welding synchronization. Better resistance to deformation. Welding line is straight, smoother & brighter. Perfect protection system: automatic protection for under voltage, over voltage, over current, over heat & over load. Automatic protection for open phase current for 3 phase machine additional features: i) 4t controlling capability used for long welding line operations. It reduces the labor intensity for the welders ii) 4t automatic controlling functions on shut down with intelligence design to prevent futile operations iii) the machine emc (electromagnetic compatibility function) with powerful grid filtering ability to reduce power supply contamination. The internal circuit & components are well protected by excellent interference design resulting in more stability and better reliability. Iv) the machine is equipped with power & voltage compensation device within the power voltage is fluctues during working + 15% of rated voltage the machine works without being affected input power voltage (v) - ac220v input frequency (hz) - 5060 rated input current (a) - 23 non-load voltage (v) - 56 output current range (a) - 10-180 rated output voltage (v) - 17.2 rated duty cycle - 60 load loss (w) - 40 power factor - 0.73 insulation class - f protection class - ip21 weight (kg) - 8.8 size of the machine (mm) - 371x155x295

All spare parts of chainsaw available. cylinder, piston, carburetor, clutch, spark plug, ignition coil, much more also all types of accessories like saw chain, guide bar, etc.

Number Of Flower : Chainsaw Spare Parts

Material : Metal, Plastic, Rubber

Condition : New

We are offering rotary hammer drillm easy to use heavy duty pr38 model capacity upto 38mm concrete drilling.

We are offering portable electric blowerm power input �650w no load speed � 13000rmin current voltage: 220-240v.

wea re Engine Type "Single Cylinder, Air Cooling - Gasoline Engine 2-stroke System" Displacement 58cc Rated output power 2.3kw Idling speed 3000rmin "Gasoline Engine Oil (Oil Mixing Ratio)" 25:1ml Ignition system C.D.I Starter system Hand-starter Fuel tank capacity 550ml Engine oil tank capacity 260ml Chain pitch 0.325" Chain 22" Guide Bar 22" Gross Weight 7.5KG

Availability : 5-6kg

Specialities : Easy To Use

Cutting Blade Size : 14 Inch

Operating Type : Manual

NBC-A Series Tap CO2 Gas-Shielded MIG MAG Welding Machine HSNBC MIG200 Suitable for welding low carbon steel, low alloy steel. Especially suitable for welding thin plate and medium plate. External unique wire feeder, steady wire feeding. Step-less adjustment, easily operate. High productivity, good welding performance, small deformation. Self-lock function, decrease labor intensity. User may make selection. Suitable for welding carbon steel, low alloy steel and stainless steel. Rated Input Voltage - 3 Phase 380V Rated input power (KVA) - 9 Zero-load voltage (V) - 17-34 Rated welding voltage (v) - 27 Output current range (A) - 40-250 Welding wire diameter (mm) - 0.8, 1.0 Max. Thickness plate(mm) - 4 Rated duty cycle (%) - 40 External Size L x W x H (mm) - 644x396x702 Weight (kg) - 80 Rated Input Voltage - 3 Phase 380V Rated input power (KVA) - 13.8 Zero-load voltage (V) - 18-40 Rated welding voltage (v) - 29.8 Output current range (A) - 40-315 Welding wire diameter (mm) - 0.8, 1.0, 1.2 Rated duty cycle (%) - 40 Welding wire diameter (mm) - 0.8-1.2 External Size L x W x H (mm) - 644x396x702 Weight (kg) - 82

The HSDL MIG200 can do a Co2 gas (Carbon-di-oxide) shielded welding flucts core wire welding & MMA manual arc welding, designed by advanced inverter technology using single tube IGBT transistor to rectify 5060 Hz frequency of the electric supply to high frequency A.C current of 20 KHz. The machine works on normal voltage of 220v single phase allows you to connect anywhere. Machine offer positive (+ve) arc start with minimal spatter both on gas as well a MMA welding with wave from control technology inductor size is adjustable generating more softer arc and this helps forming to be more beautiful. It has feature of low wire feed when arcing ensure success rate of arc strike & ending arc with cleaning up function. The machine has EMC which helps in reducing power supply pollution; digital display gives clear & high adjustment accuracy. Application Method: Low carbon steel, high carbon steel & ordinary steel. Power voltage (V) - Single phase 220V+15% Input current (A) - 29 Power capacity (KVA) - 6.4 Current adjustment range (A) - 50-200 Output voltage (V) - 16.5-24 Duty cycle (%) - 60 Power factor - 0.85 Efficiency (%) - 85 Wire reel diameter (mm) - 270 After-blow time (S) - 1 Solder wire diameter (mm) - 0.81.0 Size - 500x263x430 Weight (Kg) - 25 Suitable plate thickness (mm) - Above 0.8 Insulation class - F Enclosure protection class - IP21 Wire feeder model - Internal

Number Of Flower : Mig Welding Machinery

Our plasma cutting machine system that cuts by compress air uses plasma power supply designed by advanced inverter technology using high power device mosfets to change power frequency of 5060hz into high power frequency of 100 khz and has pwm technology to reduce voltage and adjust current to generate high power supply for cutting. Compared with convectional rectification conversion technology, inverter technology has lower energy consumption, lower weight and more smaller and compact structure with better functions. Our machine can make more powerful, more centralized and steadier & stable arc. Air in the arc is almost completely ionized. The arc temperature reaches up to 10000 to 16000 degree centigrade. The arc which in is ionized state form powerful plasma arc which can be used to cut metal quickly & heat affected zone is reduce as far as possible. It makes a very smooth cut surface which is convenient for downstream processing. The advantage of our plasma cutting machine is it works with ordinary compress air & is very easy to operate. It is mainly used for cutting steel, aluminum, stainless steel, copper sheet cutting. Parameter - 3 phase input voltage (v) - 415v+10% frequency (hz) - 5060 rated input current (a) - 14.7 non-load voltage (v) - 295 output current adjustment(a) - 20-60 rated output voltage (v) - 104 rated duty cycle - 60 efficiency (%) - 85 power factor - 0.93 no-load loss (%) - 60 insulation class - f arcing way - contract arc suggested air engine compression pressure when cutting (kg) - 4-5 thickness of plate (mm) - above 0.8 enclosure protection class - ip21 size - 505x203x375 weight - 19

Our plasma cutting machine system that cuts by compress air uses plasma power supply designed by advanced inverter technology using high power device mosfets to change power frequency of 5060hz into high power frequency of 100 khz and has pwm technology to reduce voltage and adjust current to generate high power supply for cutting. Compared with convectional rectification conversion technology, inverter technology has lower energy consumption, lower weight and more smaller and compact structure with better functions. Our machine can make more powerful, more centralized and steadier & stable arc. Air in the arc is almost completely ionized. The arc temperature reaches up to 10000 to 16000 degree centigrade. The arc which in is ionized state form powerful plasma arc which can be used to cut metal quickly & heat affected zone is reduce as far as possible. It makes a very smooth cut surface which is convenient for downstream processing. The advantage of our plasma cutting machine is it works with ordinary compress air & is very easy to operate. It is mainly used for cutting steel, aluminum, stainless steel, copper sheet cutting. Input voltage (v) - 220v+10% frequency (hz) - 5060 rated input current (a) - 30 non-load voltage (v) - 230 output current adjustment(a) - 15-40 rated output voltage (v) - 96 rated duty cycle - 60 efficiency (%) - 80 power factor - 0.73 no-load loss (%) - 40 insulation class - f arcing way - contract arc suggested air engine compression pressure when cutting (kg) - 4-5 thickness of plate (mm) - above 0.8 enclosure protection class - ip21 size - 400x153x291 weight - 9

Brand Name : GOLF ULTRA

we are offering Electric Chain Saw, Motor: Single Phase, 220V Power: 2000W Guide Bar Length: 60cms (24") Cutting Circumference: 160cms Weight: 10Kgs

Number Of Flower : As per Order

We are offering Earth Auger Machine, Model: AE520 Engine type:1-Cylinder,2-stroke, Air-cooling Engine power :1.65kw 6500-7000rmin Displacement: 51.7cc Idling speed : 3000+-200 rmin Gasoline: 2-cycle Oil mixing ratio :25:1 Carburetor: Diaphragm type Fuel tank capacity: 1200ml Model: AE820 82CC displacement Engine: 2-stroke,air-cooled, 1-cylinder Engine Rated Output Power: 3.2Kw Speed: 10000Rpm FuelOil mixture ratio: 25:1 Fuel tank capacity: 1.2 Litre.

Number Of Flower : Auger Boring Machine

Availability : 6-7 kg

Feature : Easy To Operate, Good Capacity, High Performance, Long Life, Low Maintainance

Brand Name : GOLF ULTRA

Country of Origin : India

Number Of Flower : Earth Auger

Material : Metal

Length : 3FEET

Application : Earth Drilling

Condition : New

Brand Name : GOLF ULTRA

This is a 3 in 1 multi-function welding & cutting machine. It can do mma welding, tig welding & plasma cutting up to 12mm thickness. This compact small size unit, light weight & easy to carry welding & cutting machine is manufactured with advanced inverter technology using mosfets and pwm technology .the welding has little spatter, beautiful cutting & welding seam. Machine is very easy to operate. It has high duty cycle & suitable for continuous operations. The machine has automatic compensation for voltage fluctuation. The hsct312l can be used for welding & cutting of various kind of metal material such as carbon steel, stainless steel, alloy steel, copper & other non-ferrous metals. The machine is highly efficient & energy saving .the power conversion ratio is up to 85%. Input power voltage (vachz) - ac220+15% , 5060v consumption (kva) - 4.2 non-load loss (w) - 40 duty cycle (%) - 60 power factor - 0.93 efficiency (%) - 85 insulation class - f protection class - ip21 weight (kg) - 9 size of the machine (mm) - 371x155x285 input current (a) - 102(tig) 15.6(mma) 19(plasma) output current (a) - 120(tig) 110(mma) 30(plasma) current range (a) - 10-120(tig) 10-110(mma) 15-30(plasma) no-load voltage (v) - 55(tig) 55(mma) 220(plasma) working voltage (mm) - 15(tig) 25(mma) 92(plasma) nozzle inside diameter (mm) - 1.0(plasma) air pressure (m pa) - 0.4(plasma) gas flow (lmin) - 2-5(tig) 80(plasma) cutting thickness (mm) - 1-8(plasma) arc-starting - hf oscillation(tig) hf oscillation(mma) hf oscillation(plasma)

We are offering carbon brushes, all types of carbon brushes available used in: power tools motors engineering machines & tools automobiles and much more.. also manufacturing and export done as per customer's drawing, design and grade.

Material : Carbon

Feature : Easy To Use

Width : 0-3mm

We are offering all kind of brush cutter accessories available. Cylinder with piston (complete set), piston complete set, piston rings, piston needle bearing, crankshaft needle bearing, crankshaft, flywheel, ignition coil, ignition cap (plug cap), spark plug, manifold, muffler, carburetor, carburetor repair kit, gasket set, oil seal set, air filter assembly, fuel filter with rubber pipe, fuel tank, fuel cap, air filter cover, cylinder cover, muffler cover, top cover, crankcase cover, starter kit (normal), starter kit (easy), starter pulley (regular), starter pulley (easy), starter spring (rewind spring - single), starter spring (rewind spring - double), rope string, rope roll, clutch (aluminum), clutch (metal), clutch shoe (aluminum), clutch shoe (metal), clutch spring (6 rolls), clutch spring (8 rolls), clutch drum 7t, clutch drum 9t, clutch screw, clutch shroud, clutch housing assembly, pole with shaft, handle holder, left handle, right handle, throttle cable, gear head (gear case) a, gear head (gear case) b, head nut

We are offering brush cutter (4 stroke). Engine type - air-cooled 4-stroke bore x stroke - 39 mm x 30 mm displacement - 35.8 cm3 net power output* - 1.3 hp (1.0 kw) @ 7,000 rpm net torque - 1.2 lb-ft (1.6 nm) @ 5,500 rpm pto shaft rotation - counterclockwise (from pto shaft side) compression ratio - 8.0:1 carburetor - diaphragm-type (overflow return) ignition system - transistorized magneto starting system - recoil lubrication system - crankcase pressure–driven air cleaner - semi-dry oil capacity - 100ml fuel- unleaded 86 octane or higher fuel tank capacity - 630ml dry weight - 3.3kgs

Automatic Grade : Manual

We offer all kind of brush cutter accessories available. 2t blade, 3t blade, 40t blade, 80t blade, 40t alloy blade, nylon cutter blade (trimmer) a, nylon cutter blade (trimmer) b, trimmer line (2.6mm3mm x 15mts) (round), trimmer line (2.6mm3mm x 15mts) (square), trimmer line (2.6mm3mm x 50mts) (round), trimmer line (2.6mm3mm x 50mts) (square), guard a, guard b, paddy (cropper), belt (for support)

Hsdl arc400 mma machine have been designed with latest igbt inverter technology using quality igbt single transistor these machine arc of rugged & tough constriction to withstand heavy industrial use & have faster dynamic response with strong welding output current. Welding methods: it is a manual arc welding machine. Additional features: i) three preventions: moisturedamp proof, dust proof and anti wind erosion designed to improve the reliability of electronic components within the welding machine under harsh environment ii) stable performance with the function of voltage automatic compensation. iii) the machine has thrust compensation and adjustable thermal arc function. It has also had digital display of the welding current. Iv) vrd anti-shock features ensure no load voltage is retained at 9v-15v to provide protection against electric shock. V) it has anti-pausing welding features which prevents the welding rod from sticking to the working piece and easy to operate. Vi) emc electro-magnetic compatibility functions with powerful grid filtering ability to reduce power supply contamination. Vii) internal circuits and components are well-protected by excellent anti-interference design to secure stability and reliability. Parameter - 3 phase ac input power voltage (ac) - 415v+10% input frequency (hz) - 5060 rated input current (a) - 33.9 non-load voltage (v) - 68 output current range (a) - 30-400 rated output voltage (vdc) - 36 arc force range (a) - 0-100 rated duty cycle - 60 efficiency (%) - 85 power factor - 0.93 insulation class - f no-load loss (w) - 80 protection class - ip21 size of the machine (mm) - 25 size of the machine (mm) - 520x262x468

Application : Welding

Availability : 10-20kg

Condition : New

Hsdl arc315 mma machine have been designed with latest igbt inverter technology using quality igbt single transistor these machine arc of rugged & tough constriction to withstand heavy industrial use & have faster dynamic response with strong welding output current. Welding methods: it is a manual arc welding machine. Additional features: i) three preventions: moisturedamp proof, dust proof and anti wind erosion designed to improve the reliability of electronic components within the welding machine under harsh environment ii) stable performance with the function of voltage automatic compensation. iii) the machine has thrust compensation and adjustable thermal arc function. It has also had digital display of the welding current. Iv) vrd anti-shock features ensure no load voltage is retained at 9v-15v to provide protection against electric shock. V) it has anti-pausing welding features which prevents the welding rod from sticking to the working piece and easy to operate. Vi) emc electro-magnetic compatibility functions with powerful grid filtering ability to reduce power supply contamination. Vii) internal circuits and components are well-protected by excellent anti-interference design to secure stability and reliability. Parameter - 3 phase ac input power voltage (ac) - 415v+10% input frequency (hz) - 5060 rated input current (a) - 24.2 non-load voltage (v) - 69 output current range (a) - 30-315 rated output voltage (vdc) - 32.6 arc force range (a) - 0-100 rated duty cycle - 60 efficiency (%) - 85 power factor - 0.93 insulation class - f no-load loss (w) - 80 protection class - ip21 size of the machine (mm) - 17.5 size of the machine (mm) - 475x232x392