Safety Shoes Dealers in Mumbai

Features: Upper is made of closely woven high heat resistance AMC-41 asbestos Chrome leather lining is provided inside the shoes Closed Tongue Soles are made of Leather / Nitrile combined with Asbestos for heat resistance Very ideal for Foundries. Furnaces as well as high heat work station.

We are offering to our client Safety Shoes.These Safety Shoes are offer on market leading price..Protection foots during work against any Hazard. :CE/IS/EN Certified    Why Safety Footwear?Use of PPE can be recommended or compulsory. When and where it should be used can also be stipulated. The decisions on this will be made in the Risk Assessment.If the PPE is only recommended it should be available on request and maintained. Wearing it would not need to be enforced and, unless disposable, would need to be returned after use in a clean state. If it is compulsory the employer has a duty to provide it and maintain it without cost to the employee and must also enforce its use for the tasks specified. The employee also must take reasonable care of the equipment. The employer could stipulate what happened to the equipment out of working hours.HSE requires items of PPE to be inspected for suitability after a period of time to ensure they are still fit for the purpose. The manufacturer has no control over the use of the equipment and does not specify a service life. They offer a guarantee which indicates how long the equipment would be free from manufacturing defects. It could imply it also marks the point where reasonable wear and tear could begin to show but is not a measure of the frequency of replacing equipment. The employer would gain knowledge of the life expectancy of rescuable equipment by experience.This guide is to assist in choosing appropriate Personal Protective Equipment (PPE). It is not exhaustive and does not imply that using PPE alone will be an adequate control measure.PPE should be considered a last resort used only to protect individuals who are directly involved with the work where no other protective measures will do. Where PPE is required it should be identified in the Risk Assessment for a process and specific types suggested.PPE must be chosen to be appropriate to the hazards and worst risks expected.Foot protection is best classified by its type. When a type of footwear is deemed necessary it should be purchased from a specialist industrial supplier to ensure it has been designed for the purpose intended. Workers personal footwear they arrive at work in should not be relied on to meet the requirements of hazards covered in a Risk Assessment although it should be suitable for other work duties.   Safety Rigger Boots are Still a Popular ChoiceSafety rigger boots are a particular type of pull-on safety boot which is sold in the UK. The term "rigger" comes from they were standard issue for workers on the offshore oil rigs in the North Sea. Nowadays rigger boots are worn by most types of manual worker and are worn by numerous tradesmen from a wide variety of industries.Riggers, as they are commonly known, started out as usually being tan in colour and go approximately third of the way up the leg and feature a protective toe cap for safety. Other distinguishing features of the boots include pull-on loops around the top of the boot's shaft and sometime have an internal fur lining.Since the early conception of rigger boots, the basic design has remained very constant throughout the years. The ever increasing demands of the demands of the worker has meant that some manufacturers have evolved the safety rigger from a basic standard protective boot to a boots with high specifications and improved comfort the wearer.

Design Gum Boot, Upper Direct Injection PVC, Toe Cap Steel Toe Cap - 140 Joules, Inner Lining Breathable Textile Lining, 250 gsm, Electrical Resistance Max 18 KV for 1 minute exposure, Temperature Resistance Max 150° C for 1 min, Heel Height 34 mm, Toe Height 20 mm, Sizes Available 5 - 11.

Our stringent quality procedures and analysis as per the guidelines help us in presenting reliable product range. The organization is a trusted name based in Mumbai(India) and known for its fair pricing policy. Product Details: Made out of asbestos Chemical proof Fine finishing Long-lasting Reliable Suit stitched with Kevlar thread. Our Asbestos Shoes have a superior quality flannel lining heat resistance up to 300Ëš temp.  

Brand: BRAVEMAN DESIGN: B Upper Lower : Genuine grain Oil & water repellent S1 quality leather (Oil Pull Up). Upper Collar : Genuine grain CG S1quality leather. Upper Colour : Chocolate Brown & Tan Brown combination. Thickness - 1.80 to 2.00mm as required in EN 20345 standards Inner lining : Fully lined with cushioned Cambrelle Lining. Tongue : Closed & Padded for extra Comfort. Insole : Antistatic fibre insole 2.50mm-3.00mm thick. Insock : 3 mm padded insock for extra comfort. Steel toe cap : 200J impact resistant - made to DIN 12568 Powder coated EN marked Steel mid Sole : Made from 0.43mm Punture resistant Stainless Steel Spring Steel CE 12568/DIN 32768 Collar : Padded for extra comfort and protection Eyelets : D rings-4 nos powder coated black. Laces : Round 120 mm long. Sole : Directly Injected onto uppers on German 'DESMA' machine. Dual density PU sole having antistatic / antiskid/antislip properties. Resistant to acid/oil/water and heat resistant upto 120 degrees C. PU chemicals obtained from 'HUNTSMAN' of U.K considered the best in polyurethane. Upper-Sole Process : strobel lasting without nails Certification : CE certified.

Safety Shoes are specially designed in order to protect feet of the industrial workers at the hazardous environment. Made from durable materials, our Safety Shoes are highly acclaimed for high strength, light weight and slip resistance. These Safety Shoes are available in different designs and colors so as to provide a wide selection to the clients.