Safety Valve Dealers in Mumbai

Safety valve coated or covered with rubber or the like, suitable to be vulcanized or sealed to inflatable articles, comprising a metal cap hinged or pivoted at one end thereof, which is pressed by a resilient member against a valve seating so as to provide for a sealing until the inner pressure in the inflatable article exceeds a determined rate defined by the resilient member. A top baffle is also provided for protecting the valve, adjusting the flow rate thereof and retaining a possible closing wedge.

Safety Valves Are you looking for a Suitable Supplier for Safety Valves? Various Safety Valves Safety Valvesstandards full range,fast delivery, contact Global Steel & Engg for all types of Safety Valves. , Safety Valves suppliers with a wide range of Stainles Steel Safety Valves, Bronze Safety Valves, Cast Steel Safety Valves, Cast Iron Safety Valves, The strength of our company lies in the strength of personnel who produce quality work. We believe in cohesiveness and team effort. The company is following the policy of continuous up-gradation of technology and processes while maintaining its cost effectiveness by making optimum use of its resources and goodwill. Salient Features are as follows: Design, Mfg. & Tested as per API 520, 521, 526, 527 standards Models Comply to ASME Section VIII of boiler & pressure vessels code Registered under Indian Boiler Regulation (IBR) Also approved by chief controller of explosives department (CCOE) Conventional or Balance Bellows Design Complete Teflon (FEP/PFA). Lining for highly corrosive services Soft Seat arrangement for Tight Shut-Off. Weight & lever type Safety Relief Valves are offered for low set pressure and high discharge capacity All Thermal Relief Valves (BTS-10 & BTS-11) models are offered in Investment Casting (1/2" to 2") Stellited Trims for high Pressure & Temperature Safety Relief Valves are Inspected, Tested, & Certified by BV / DNV / TUV / MECON / IBR / CCE / BAX Council Size Range from ½" x ¾" to 10" x 14" Material of Construction CI / CS / SS 304 / SS 316 / GM / Alloy Steel.

Body:Bronze, CI, CS   Springs:Single or Double Pos

We have wide range of safety valves and also various varieties in different sizes, shapes and dimension which meet the many different applications and performance. We always are ready with our huge amount of products demanded by different customers and industries. It is mainly installed in pressure vessels such as mechanical plants, gas boiler tanks etc. Our safety valves meet all standards which define many types of various safety valves. Because of this we are best Safety Valve supplier in Mumbai Maharashtra.

Safety valves available for most applications such as steam, air, vapour & liquids. Valves are designed to meet the requirements of applicable a.s.m.e & api codes.

We subdue the demand for Safety Valves, from anywhere across the country, with the finest of such kind. We are taking over the market as the reliable Manufacturers, Exporters and Suppliers of Safety Valves in Mumbai, Maharashtra. We provide Angle Safety Valves and Industrial Safety Valves that are superb on counts of performance and durability. We are backed by a vast distribution network, which comes to our aid in serving the market swiftly and adroitly. Buy them from us!

We offer liquid valves. The seetru range of safety valves for liquid applications has been designed to be compact and highly effi cient. The bubble-tightsealing performance makes these valves suitable for many liquid applications including; hydraulic systems, pumping systems,thermal relief, chemical storage, waste water management, oil transfer, petrochemical industry, fi re fi ghting equipment and watercooling systems. Suitable for temperatures up to 250 °c.

Safety Valve These units are the superlative decision for our customers over the others because of their vigorous development, solidness, dimensional exactness and better working. These are boundlessly out of this world at a reasonable cost

We are a trustworthy name, involved in offering excellence in the form of Safety Valves. One can approach us anytime for placing orders and expect safe and timely deliveries of the same.   Our Features : Design - API Angle safety relief and pop Type Material - carbon Steel CS A 216,WCB.WC6, WC9,WCC.LCB,LCC,,CF8,CF8M,CF3M, etc. Disc & Seat - CS SS304.304L,SS316,316L,GM,monel Trims - F6, SS 304,304L, 316,316L, Monel satellite HF etc Action - Hand Wheel Rating - ASA 150, 300, 600,900,1500,2500, Ends conn. - Flanged ends, Butt weld, B16.10, B16.25 Mfg. - API Testing - API 598 / BS 6755 Application - Air, Gas, Water, chemicals, Pharma, oil, acid, Foods, vacuum, heat treatment ,paper & sugar industries, Power plant

We are offering sanitary ball type safety valve. Valves: gaskets are made from ss316l material. Valve hand wheel is made of suppressed steel. Application : steam,water, oil

Conventional Safety Relief Valves are those which work on simple working principle of force balance. The operation of a conventional spring-loaded PSV/SRV is based on a force balance principle. Under normal operating conditions, until the pressure at the inlet is below the set pressure or opening pressure, the disc is seated on the nozzle preventing flow through the nozzle. When the pressure at inlet exceeds set pressure/opening pressure, then pressure force on the bottom of disc overcomes the spring force, lifts the disc affecting opening of valve and relieves the excessive pressure in system.   When the inlet pressure drops sufficiently below the set pressure / opening pressure, the spring force overcomes the pressure force, the disc re-seats on nozzle and valve closes.   In REGPORT conventional Safety Relief Valves, an adjustable Blow Down Ring is provided for adjusting the opening in the annular orifice, thus controlling the pressure build-up in the huddling chamber. This controlled pressure build-up in the huddling chamber will overcome the spring force causing the disc to move away from the nozzle seat, and the valve will pop open. With this, fine adjustment in over pressure and blow down can be done. As a standard, unless specified, all our Safety Relief Valves are Full Nozzle Full Lift and tested for 10% over pressure. Following Series of Models are supplied

We offer Safety Valves which are precisely designed & 100 % factory tested as per pressure rating of American Standard. We make available the Safety Valve in an assortment of sizes. The Safety Valves we offer finds varied applications across industries. Clients are eased with the availability of the Safety Valves at economical prices. Used InCompressorsReceiversBurnersDryersSteam boilersSteam services on unfired pressure vesselsAccumulators, cleanness and sis tillers SpecificationsMaterial : Cast Iron, Carbon Steel, SS 304/316, SS 304 L / 316L, Gunmetal etc.Design : Self Actuating, Full lift typeDischarge : Angle, StraightBonnet : 0pen, ClosedRating : 150 LBS X 150 LBS, 300 LBS X 300 LBS, 600 LBS X 600 LBSEnds : Screwed, Flanged EndSize : ½" X ¾ " - 6" X 8"