Scientific Instruments Dealers in Goregaon East, Mumbai

• Accuracy: +/- 0.25%,+/-0.1% OF F.S.D OR BETTER.
• END CONNECTION: ¼

flow point :- solid pmma transparent acrylic body single limb manometer are accurate and dependable as well as higly versatile for many applications. It fabricated from 25 mm thick transparent acrylic solid block ,virtually unbreakable stable and free from distortion for the precision measurement of pressure ,vaccum and diffrential ,scales are graduated to correct for the drop in the well level for inclined and single limb manometer for high accuracy.

Suitable for continuous or intermittent, monitoring of central venous pressure during infusion particularly in ICU, CCU, OT’s and casualty departments. Manometer tube with graduation from –4 cm to +34 cm and attached to three way tap. 120 cm. long extention tube is fitted with female luer lock on one end and male luer lock on the other end for safe connection to central venous catheter. Injection site is provided additionally for extra medication. Sliding indicator provided to record previous reading. Moulded clamps with elastic strings are provided for easy fixation on the I.V. stand. Sterile, individually packed in peelable pouch. Category reference code

• Temperature: -5oC to 50oC
• Humidity: 0-98% Relative Humidity.

To determine the material thickness of all non-woven fabrics. With these instruments the most popular checking methods can be applied for textiles, felt, paper, floor coverings, leather, foils, rubber etc.

• INPUT:: 230/240 Volts 1 Ph 50 Hz AC
• OUTPUT:: 0-3 kV / 0 – 6 kv One Side Grounded.

3 Pin System of Live, Neutral And Earth. Ensure Proper Earthing at your end.,MCB,Zero Interlock Provided,Fast acting tripping Device

• Temperature Range: -10℃+50℃. (14℉+122℉)
• Model Name/Number: M-288
• Usage/Application: Industrial
• Display Type: Digital
• Brand: HTC
• Humidity range: 10%

Temperature Range Above Ambient To 99.9 Degree C / 0 C To 99.9 Degree C/ -10 C To 99.9 Degree C  Accuracy + 0.1 Degree C TO 0.5 Degree C  Applications This equipment is specially designed for tests in the field of Medical / Agricultural / Bio-chemical / R & D & Q.C Laboratories & also suits various IS & A S T M Standards.  Construction Double walled, Exterior of CRCA / GI Non-contaminant Epoxy Powder coated & Inner chamber of AISI S.S 304, with PUF insulation, S.S Lid on top with provision for holding Viscometer Holders.  Circulations Efficient Motor of 1440 RPM Top Mounted is installed for stirring to get temp. uniformity.  Heaters S. S Tubular Heaters for maintaining of temp.  Refrigeration System Hermitically Sealed compressor provides temp. for below ambient conditions. Refrigerant CFC Free. g Temperature Control Solid state electronic Digital Temp. Control panels housing all the control switches with PT-100 Sensor. o Optional Models available as per GMP / Complete S.S unit, Strip Chart Recorder. Microprocessor based PID temp. Control with printer interface, RS 232 CPC / RS -485 interface for multing networking of controller. (Data Logger).  Validation Protocols Validation Protocols for IQ, OQ, PQ, DQ complete documentation with reports, Calibration & Test Certificates. r Safety Features Safety thermostats for over shooting of temp. safety circuit to cut off the whole system in case of malfunction (Applicable to microprocessor based models only) HRC fuses for compressor heaters & mains, time delay circuit for safety of compressor.

It is used to determine absolute or dynamic viscosity of bitumen and cut-backs by vacuum capillary viscometers at any specified temperature. It is applicable for the materials having 42 to 200000 Poises. Supplied complete with manufacturers Test Certificate for Constant under Vacuum 30 cm Hg of Bulb B & Bulb C.

• Type: Spectrometers
• Weight: 10-15kg, 15-20kg, 20-25kg
• Voltage: 110V, 220V, 380V
• Condition: New, Used
• Application: Industrial Use, Laboratory Use
• Display Type: Digital
• Power: 1kw, 2kw, 3kw
• Power Source: Electric
• Focal Length: 100-200mm, 200-300mm, 300-400mm, 400-500mm
• Warranty: 1year, 2years
• Wave Length: 100-200mm, 200-300mm, 300-400mm, 400-500mm, 500-600mm, 600-700mm, 700-800m

Vernier Caliper is a precision instrument that is used to measure internal and external distances accurately. Our range of Vernier Caliper is highly appreciated by the clients for the features like durable finish, less maintenance, optimum performance and accurate results. Vernier Caliper that we provide is known for providing zero error, which makes it highly preferable.

We are a reliable Manufacturer, Exporter & Supplier of Viscosity Bath. The Viscosity Bath offered by us is used for highly stable viscosity bath temperatures. The Viscosity Bath comes with a digital measurement and display. We offer Viscosity Bath that is sturdy, durable, and efficient and offers reliable performance. The Viscosity Bath can e availed from us at competitive price. Construction & Working A top-mounted controller keypad permits quick entry of bath set point temperature while a sophisticated microprocessor controls the bath heating and stirringTo further enhance the input, the unit accommodates up to a maximum of six individual capillariesThe HVB features a measuring range of 5oC to 230oC and can be used with mineral oil, silicone oil, or water as the bath media. Bath temperature is displayed on a bright, easy-to-read digital display.The unit features a built-in over-temperature circuit and bath liquid level detector to automatically cut heater power in the event of thermal runaway or insufficient bath media Features Measures kinematic viscosity of petroleum products at temperatures from 20oC to 150oC, according to ASTM D 445; IP 71 ; DIN 51562 ; ISO 3104 ; IS-1206 (Part III)-1978Accommodates up to six capillary tubes; optional Cannon-Fenske or canon- menin tube holders availableDigital bath temperature measurement and displayControls bath temperature with ±0.01oC stabilityIntegral over-temperature and low bath level protectionLarge capacity bath with built-in stirrer, optional illumination Optional Vacuum Gauge attachment accessories�U� tube clamp made up of acrylic polycarbonate materialOn demand Software based Microprocessor programmable PID controller with Time proportionate bands, data logger & cyclic timer, real clock battery backup, RAM memory, printer & PC interface controller with PT-100 sensor can be provided with the unit at Extra cost. Our technology is fully controlled, easy to handle, user friendly, intelligent and reliableGlass �U� calibrated tube of any type

"Delta" H.V. Flash Tester are made heavy duty, keeping in mind long term reliability. Rating are 0 - 5 kV @ 100 mA. Trip current settings can be provided as 25 mA - 50 mA - 75 mA - 100 mA OR 10 mA - 25 mA - 50mA- 75 mA. As an option, a timer can be provided to test an object for a preset time. Most of the capacitors used in the lighting industry are hand made, esp. the metallization of electrodes . The qualitiy of these capacitors change from batch to batch." Delta" has developed a test panel with high discharge currents (up to 10 kA pulse) to test the capacitors samples cyclically for a specified duration. If during this test, any capacitor short-circuits; a lamp- inside the panel will light up. After the test capacitors have to be tested for their impedance by passing the current at rated voltage This is a destructive test; all the capacitors tested on this panel have to be destroyed afterwards & not to be used.

• INPUT:: 230/240 Volts 1 Ph 50 Hz AC
• OUTPUT:: 0-3 kV / 0 – 6 kv One Side Grounded.

3 Pin System of Live, Neutral And Earth. Ensure Proper Earthing at your end.,MCB,Zero Interlock Provided,Fast acting tripping Device

• Material: Stainless Steel
• Size: 11-15 mm
• Length: 130 mm
• Color: Grey
• Use: Surgical
• Surface: Polished

• Model Number: PE-11R_PE-11RC_PE-11R-T_PE-11RC-T
• Accuracy: 0.05%
• Country of Origin: Made in India
• Display Type: 4.5 digit display
• Range: 1 micro ohms to 200 kilo ohms
• Current: 1 A.DC
• Brand: Prestige Electronics
• Model: Micro Ohm meter
• Usage: Industrial
• Resolution: 1 micro ohms
• Test current: 1 A.DC
• Measurement technique: True 4-wire/ Kelvin measurement
• Temperature coefficient: 50 ppm
• Computer Interface: Yes, with PC software
• Memory storage: 2500 readings
• Temperature Sensor: Yes
• Temperature Corrected Readings: Yes ( @ 20 DegreeC)
• Resistivity / Conductivity Calculations: Yes ( ohm.meter / % IACS)

• Brand Name: Mitutoyo
• Material: Stainless Steel
• Size/Dimension: 0.01 to 150 mm
• Measuring Range: 6 inch 
• Display Type: Digital
• Model Name/Number: vernier caliper
• Usage/Application: Industrial

New Revolution in Zeeman based AAS with Transversely Heated Graphite Furnace with STPF Platform and Direct Solid Sampling. Zeeenit 700 P with Dual Atomizer Concept needing no change over and alignments while switch over from flame and furnace. Offers two sample compartments in a single system. Zeenit 650 P with dedicated furnace system with both Deuterium and  Zeeman correction. Quartz Coated Optics with 10 years Long Term Warranty on optics. Optimized Czerny-Turner-Monochromator with 2 different focal lengths. 8 position lamp changer with coded lamps. Choice of both strong Deutetium Background Correction and Three Field Zeeman Back ground correction. Transversal magnetic field in combination with the Transverse Heated Graphite Furnace. Advanced Furnace Control AFC – formation routine. Integrated high-end vision (Camera) tool for best observation and control of sample injection and sample drying in the graphite tube. Furnace park position in front of the instrument.  Pipetting insert.  Internal light option (LED) in the furnace.   Variable magnetic field from 0.01 T to 1.0 T, modulation with 200Hz.   2field and 3field-mode – dynamic mode.  Automatic insert depth correction.  Intelligent dilution and enrichment with control value.  Methode specific injection depth.  Integrated AQS Software.  HydrEA technique in the continuous flow and batch mode.  Solid and liquid sample input. Software Conforming 21 CFR PART 11.

• Brand Name: kartographers
• voltage: voltage regulator

We offers static voltage regulator. compact design 60kg, 20 x 20 x 7 inch. isolated noise free output. design based on microprocessor. Single phase & three phase configurations. voltage regulation in output +- 5% ( optional +-3% ) . power capacity range from 3.0 kva to 27.0 kva. wide input voltage range. static operation, no moving parts & no noise. speed correction better than 0.1 second. phase sequence correction option in three phase model. high low voltage trip.long life and trouble free performance. wide load power factor. Efficiency > 97%. temperture sensitive air cooling. Load crest factor of 3:1. over load rating of upto 200 % for one minute. aquiring minimum floor space. Ideal for industrial, domestic or telecom applications. ideally suited for 100% duty cycle applications. custom feature of logging line and load conditions. other products:dataloggers, awos, automated weather observation systems, current weather monitoring, ir radiometer applications, pressure datalogger, temperature datalogger,modbus indiko,alram annuciator,pid-temperature-controller,canopy-temperature,modbus-data logger,wind-solar measurement system,universal scanner,rain-data logger,programmable dcpower supply,float cum boost charger,static voltage regulator,25kv inverter,pure sine wave solar inerter-charger.

• Voltage: 230 V
• Display Type: 0.56"
• Frequency: 50-60 Hz
• Brand: System Controls
• Phase: Single
• Humidity: Less than equal 70%
• Showing of Numbers: 3 Digit
• Input: DC Volt
• Warrenty : 1Year

• Depth:: 190 mm (7.5 in.)
• Height:: 26 mm (1 in.)
• Width: 63 mm (2.5 in)
• Weight: 260 g (0.6 lb)

This compact, portable unit provides fast and accuratemeasurement of relative humidity and temperature ofstacks of paper. APPLICATIONS Paper, stacks, and reams SPECIFICATIONS Humidity Range: 0 to 100% RH Accuracy: ±2%RH from 20°C to 25°C (68°F to 77°F) Humidity Resolution: 0.1% RH Certified to NAMAS humidity standards Temperature Range: -5°C to +50°C (23°F to 122°F) Temperature Accuracy: ±0.5°C (±0.9°F) Temperature Resolution: 0.1°C or 0.1°F Response time: less than 10 seconds at 25°C FEATURES Dual display of humidity and temperature Display hold Multi-position probe Battery test function Automatic power shut-off after 2 minutes

Intelligent signal sampling for accurate data measuring and parameter reading Accurate viscometer for improving experimental efficiency High precision digital display Ideal for controlling the temperature accuracy Durable glass bath for optimum heat preservation Desktop based all-in-one design for easy operations and portability Electric stirrer for ensuring uniform temperature of bath Easy cleaning and drying of viscometer tubes

A central venous manometer may be used to either continuously or intermittently measure central venous pressure. Graduated column where measurements are in centimetres of water. Graduations are marked from –4 cm to 34 cm and attached to three way stopcock. A 120 cm long extension tube is fitted with female luer lock on one end and male luer lock on the other end for safe connection to Central Venous Catheter. Moulded clamps are provided with latex rubber strings for proper fixation to the I.V. Stand. A Sliding indicator is provided to record reading of the fluid levels during measurement. CVP manometer mostly used in ICCUs, CCUs, surgical ICUs and surgery wards to monitor and control the hemodynamic state of patients by measurement of the Central Venous Pressure.   FEATURESBENEFITS Crystal clear rigid tube (or) Rigid scale with manometer tube Calibrated from (-)5 to (+)30cm water pressure for accurate pressure reading Reusable tie bands / Velcro straps For easy fixing to the I. V. stand 'Transparent & fully threaded end adaptors with 3WSC Ensures a safe and secure connection with trouble free venting Moulded clamps are provided with latex rubber strings For proper fixation to the I.V. Stand Sliding leveler To  record  fluid level readings during  CVP measurement Vented luer caps Permits aseptic handling and priming

• Brand Name: Insize
• Material: Steel
• Size/Dimension: 150mm to start
• Accuracy: 0.03mm
• Display Type: Digital
• Usage/Application: Industrial

• Range Voltage: 0–100kV

The Powdatest Electrostatic High Voltage Meter is a precision instrument that measures both electrostatic spray gun high voltages and discharge currents. With the Powdatest, any electrostatic sprayer can now quickly measure the voltage at the spray gun tip. This corona point is where the electrostatic voltage must be maintained at the correct voltage. The spray gun high voltage can be up to 100kV and can be either a positive or negative charge. Using the Powdatest, the actual gun voltage can be quickly and accurately measured.

Golden Dial for measuring of relative humidity in Air. Range: 0 to 100 % Size: A)85 mm. Plastic body B) 85 mm. metal body, Golden Ring C)105 mm. metal body, Golden Ring

For measuring viscosity of non newtonion liquid such as paints, resins etc.

• Brand Name: Prestige Electronics
• Application: Industrial, Laboratory
• Model: PEI-24
• Multiple Test Voltages: 100V, 250V, 500V, 1000V
• Basic accuracy: 3%

• Brand Name: Cogent Controls
• Model Number/Name: VATM
• Size: 192x96x65 (mm)