Sealant Tape Dealers in Mumbai

ZERO LEAKAGE CLEAN & EFFECTIVE "Champion" PTFE Thread Sealant Tape, due to the special nature of the thread seal will be lasting and resistant to high temperatures and corrosive chemicals. The seal will not harden or become brittle but will remain flexible enough when the seal is opened for maintenance. "Champion" PTFE Thread Sealant Tape can be used for various media from corrosive chemicals to water and gas to oil, in hydraulics and pneumatics. Instructions for proper usage Wind the tape by hand, using a constant minimal tension sufficient for the tape to take up the form of the thread. The tape should be wound in a helical fashion with a 50% overlap (as shown in the diagram) in the direction of the thread so that when the connection is completed the finishing end of the tape remains in position. The tape width should not exceed the length of the thread form. 

Our enterprise is counted among the trusted organizations that are offering Double Sided Polyester Tapes. For keeping the adhesiveness of our tapes secure, these are designed with release liner. Customers can avail these tapes in varied thicknesses and sizes, these are well laminated to easily removable paper liner. The offered tapes are covered with rubber or solvent acrylic adhesive on both the sides. Moreover, customers can avail these tapes from us at market-leading prices.

Heat seal tape to make the joints leak proof. Teflon tapes are to be applied on the male threads and the pipe joint compound on the female threads, together this combination ensures a leak proof joint.

PTFE thread seal tapes can be used as a sealant in all types of threaded pipe materials like iron, steel, copper, aluminum, special steel, plastics including PVC pipes. Apart from these, the most important characteristics of PTFE tapes to be used as a thread sealant are the tensile strength properties and the density. Performance of the tape is determined by the balance of tensile strength and elongation between the longitudinal and transverse directions & the percentage elongation at break in the transverse direction. Good drape is the ability of the thread seal tape to conform closely to the pipe threads without tearing.  

PTFE Thread Sealant Tape, due to the special nature of the thread seal will be lasting and resistant to high temperatures and corrosive chemicals.The seal will not harden or become brittle but will remain flexible enough when the seal is opened for maintenance.PTFE Thread Sealant Tape can be used for various media from corrosive chemicals to water and gas to oil, in hydraulics and pneumatics.

For taping of overhang of stator coil of high voltage machine. It allows resin to penetrate through it during pressure cycle of VPI impregnation but restricts back flow (run off) during subsequent operations. Further during the curing Polyester film and fibre shrink to maximum permissible limits to provide fully consolidated over-hang insulation.  

PTFE thread seal tapes can be used as a sealant in all types of threaded pipe materials like iron, steel, copper, aluminum, special steel, plastics including PVC pipes. Apart from these, the most important characteristics of PTFE thread seal tapes to be used as a thread sealant are the tensile strength properties and the density. Our teams are manufacturers, suppliers and exporters of ptfe thread seal tape in Mumbai, India to all over the world. Performance of the tape is determined by the balance of tensile strength and elongation between the longitudinal and transverse directions & the percentage elongation at break in the transverse direction. Good drape is the ability of the ptfe thread seal tape to conform closely to the pipe threads without tearing. PTFE thread seal tapes ensure long term high reliable service and easy disassembly. The tapes provide permanently sealed joints which will outlast the pipe under any service condition. The inherent lubricant properties of the tape relieve falling, binding & sticking often encountered with other types of ptfe thread seal tape. The tape is so pliable that it seals in the roots of the pipe threads and it remains complaint at high and low temperatures and high pressures. No acids, alkalis, or organic solvents and chemicals will chemically attack seals made from PTFE tape sealant. Since the tape does not harden with age, the joints do not freeze enabling easy disassembly of equipments. PTFE thread seal tape can be used with toxic flammable and absorbent materials. Our PTFE thread seal tapes are guaranteed by UNDERWRITERS LABORATORIES INC, USA. These high density PTFE thread seal tapes are available in yellow, Pink & white colors having various densities & widths. Its is suitable for lines carrying propane, butane, natural gas, water, oil & chemicals, usable on all types of pipes & threads & capable to withstand pressure upto 100 PSIG & temperature of -240oC to +260oC Technical Parameters: Thickness: 0.075mm (3 Mil) Elongation: 165% to 190% pH Range: 0-14 Temperature: -240oC to +260oC Pressure: 200 Kg/Cm2   Application   Chemical Plants Gas Cylinders Hydraulic & Pneumatic Equipments Paper Industries Domestic plumbing Pharmaceutical Industries Medical Equipments Auto Industries Petrochemical Industries Refineries Food Processing Units Cryogenic Equipments

Contact us, if you are looking for Butyl Sealant Tape. Our company stands tall as a trusted Manufacturer, Exporter and Supplier of Butyl Sealant Tape. Our Butyl Sealant Tape has high elasticity that provides excellent resistance towards shocks and movements. It has found its extensive applications in steel buildings, grain bin bases, mobile home seams, air filtration, foundations and many more. It is made from optimum quality Butyl Tape and act as an adhesive tape.

We are offering superior grade Sealant Tape that is widely acknowledged for its excellent adhesion properties. Our wide range of Sealant Tape is available in various sizes and thicknesses in order to meet the specific requirements of the clients. Our Sealant Tape range includes Butyl Tape, Glass Fiber Tape, Masking Tape and Bopp Tape. These Sealant Tapes effectively seals the area wherever applied and their water resistant property makes them last for long. Clients can be sure of the quality as we procure Sealant Tapes from renowned manufacturers. We house a large stock of Sealant Tape (Tacky Tape), thus, able to meet your urgent demands also, for any quantity. Our company is ranked amid the top-notch Sealant Tape Suppliers and Exporters in Mumbai. We offer this product at market leading rates.

Flips®™ Sealon is a packing cord, a versatile gasket made of pure PTFE, and free from any additives.It is economical: cut off only the desired length from the spool. It usually costs, on a per-gasket basis, less than other gasketing alternative. There is no scrap or waste. Since there is no fitting or precutting, it has just to be pressed in place, saving on installation time, too. Since it is inert to most chemicals, it is perfect for the most challenging chemical applications. Easy InstallationFirst, clean surfaces of flanges. Form a ring by pressing Sealon around center of flange. The two ends should overlap 1 ~ 2 cm near a bolt hole. Reposition the other half of the flange and tighten up the bolts on diagonal line using equal pressure. During routine maintenance, flanges will part freely and Sealon will be easy to remove. Flips®™ Sealon with Adhesive TapeFlips®™ Sealon can be delivered with self-adhesive film on one side, covered with a paper film as backing. This makes sealing work easy: simply remove the paper backing from the self-adhesive film and the self-adhesive tape will hold the Sealon in place until permanently put in position by the pressure of e.g. bolts. PropertiesFlips®™ Sealon has excellent resistance of pressing, creep relaxation and cold flow. It can even seal damaged and uneven surfaces. It does not have any corrosion and is able to be stored without any time limits. When properly installed, Sealon becomes a thin, strong gasket with the ability to withstand high compressive loads. This, together with its resistance to creep and cold flow, helps Sealon maintain a high level of tightness over time. In most applications, after initial installation, there is no need to retorque, even at temperatures up to 600° F (315° C). ApplicationsFlips®™ Sealon is used in industries including: Chemical Manufacturing, Food Equipment Manufacturing, Pharmaceutical Plants, Petrochemical Production, Steel Manufacturing, Distilling, Food and Beverage Processing, Pulp and Paper Processing, Power Generation, Marine Applications. Sealon is used in virtually many types of sealing applications like: Pipe Flange Gaskets, Pipe Sealants, Fume Ducts, Concrete Lids, Tanks, Heat Exchangers, Pressure Containers, Cooling Towers, Reactors, Casings, Fiberglass-Reinforced Plastic Vessels, Various Lining Containers, Hydraulic and Pneumatic Systems, Sealing Gaskets for Large-Diameter Equipment. Since Sealon has a low stress to seal requirement, it also makes an effective gasket on delicate assemblies such as Glass, Plastic, FRP, Ceramic or Graphite.

We are in the midst of leading bag sealing tape manufacturer as well as suppliers in India. Our poly bag sealing tape is highly appreciated for its authenticity. Also our plastic bag sealing tape is famous among the customers all over the world as they are highly reliable. We proffer best quality Bag Sealing Tapes. Our bag sealing tapes ensures the tight and safe sealing of safe. Furthermore we proffer very realistic prices for high quality Bag Sealing Tapes.

Inseal International is the leading manufacturer and supplier of butyl tapes in India. Butyl sealant tapes are pressure induced sealing strips with strong adhesion capability. They are applied to a wide spectrum of surfaces as metals, glass and various other materials that make up for high-end applications from Telecommunications to Windmill Turbines. Their total sealing strength is useful in soundproofing (dampening) and complete prevention of dust, moisture and air that could be harmful to sensitive components. Apart from being impermeable to gases and vapour, the sealants are resistant to heat, oxygen, ozone, sunlight and equally resistant to a diverse range of chemicals. The Butyl Tapes are of the non-vulcanized variety with properties as non-shrinking, non-straining and remaining unaffected prolonged contact with all of the metals, nor do they harden up over a long time. Their excellent dielectric insulation and temperature resistant qualities to both hot and cold, enable them to be used in harsh environments.   Weathershield / Flash Strip Weathershield is an easy to apply self bonding tape. Weathershield comprise of water-proofing layer of aluminium sheet firmly adhered to a pressure sensitive adhesive backing proteced by release paper strip. It bonds to a wide range of building materials to form an instant, permanent and watertight seal. Applications: Waterproofing, sealing, insulation and repairing in construction, industrial roofing ( concrete, asbestos, glass etc.) pipes, cables, refrigeration and many other domestic applications. Vaccum Bag Tape A thick, Rubber-Based adhesive tape that is sticky all around, is used to form and airtight seal along the edges of Vacuum Bags. This Tape is use in Vacuum Bagging of Composite Parts. This Tape will seal the bag to Aluminium, Steel and Fiberglass surfaces yet strips easily after cure. Use to Plug Leaks and Tears in the bag that can develop during cure. The Tape remains soft and pliable at temperatures in excess of 180 ° it is also referred to as Tacky Tape. Roofing Tape A pressure sensitive tape based on Butyl Rubber with excellent adhesive to various ROOFING and BUILDING materials such as cement concrete, metal, asbestos, wood, plastic, glass, fiberglass, textiles, etc. Mastic Tape (Cable Jointly Kit Acc.) Content will come here Door Foil Adhesive This Tape is use in Doors for Automobile Industries and it effectively prevents passage of moisture, water and dust. It has got excellent dimension stability and helps in reducing vibration. Hotmelt Sealants and Adhesives InSeal hot melt sealant has been scientifically researched and developed in our own in house laboratories. It’s specially formulated with elastomeric rubber compounds to provide installation ease, high tensile strength and lasting flexibility. It is strong, versatile, convenient, waterproof, highly elastic, crack resistant, chemical resistant, environmentally friendly, and economical.