Shital Scientific Industries Lower Parel, Mumbai, Maharashtra

This water distillation unit is designed to give pyrogen free distilled water. This is needed practically in every laboratory, hospitals, research institution, industries, colleges, pathological lab and other many more labs where the distilled water is needed.Construction :The complete body is fabricated out of S.S. 304 grade material. A baffle is provided to avoid splashing of row water particles into condenser pipe. A cock is provided at water inlet to control the water flow inside the unit. The constant level attachment maintains water level inside boiling chamber and excessive water is thrown away. A lid is automatically sealed by water forming in a recess provided at the top of the boiling chamber. The flange of the lid rests in this ring. The cold water which enters in the coolant pipe condenses the steam into distilled water and preheated water gets into the boiling chamber. This reduces the electric consumption. The condenser pipe is easily removable for cleaning in condenser opening type.Heaters :The water still is fitted with self ejection type heating element which disconnects electric supply connector if still runs without water. Even though care should be taken not to run the still without sufficient water flow as the protective arrangement cannot be expected to work for several operations. The heating elements are easilt replaceable.The stated output of the still is approximate as it depends on supply voltage fluctuations. 

Double walled inner chamber made of thick gauge stainless steel. Outer made of crca sheet. Highly insulated with glass wool between two walls. Thermostatically controlled by imported thermostat enclosed in s.s. pipe at bottom for easy replacement. Top s.s. cover of rectangular water bath having 6 or 12 holes with concentric rings. Round water bath having s.s. perforated false bottom heater cover. Top s.s. lid to accommodate round bottom flask.                     L x W x H                                                             RATINGSSI-2(A)   14” x 10” x 4”(35 cms x 25 cms x 10 cms)       1 Kw        6 HOLESSSI–2(B)   16” x 12” x 4”(40 cms x 30 cms x 10 cms)       1.5 Kw 12 HOLES

Rotary high vacuum pumps oil sealed, air cooled, v-belt driven and mounted on base plate with belt guard. Fitted with electric motor 220 volts a.c. single phase pump r.p.m. 500 displacement 50 ltrs / min   ACCESSORIES AT EXTRA COST• Non return valve - it is made of M.S. bar stock to prevent body leakages and is provided with a spring-tensioned rubber diaphragm. The diaphragm is pulled down due to suction of air when the pump starts and it blocks the port by spring tension and vacuum as soon as the pump and thereby prevents back flow of oil.• Vacuum gauge with regulator - gauge is of 2 inches(50 mm) diameter and graduated from 0 to 760 mm of mercury. The regulator is screw type which leaks atmospheric air into the pump and thereby maintains any desired vacuum in the system• Air filter• Moisture trap• Macleod gauge -very compact, range 10 mm to 0.01 mm hg. Pressure complete with mercury. range 10 mm to 0.01 mm hg.

" Shital " U.V. cabinet is compact light unit suitable for use in any laboratory , bank , offices and other places where long-wave , short -wave , U.V. inspection is to be done. In addition to U.V. sources a white visible daylight is also provided in cabinet for convenience of placing samples. It is designed to examine samples under long wave U.V. of 365nm or short wave U.V. of 254 nm . A thin layer chromatography (tlc) plates of 30 mm x 250mm can be placed inside the cabinet. The unit is useful for examination of documents , stamps, notes, cheques, for forgeries and also for plant specimens, minerals , textiles , bacterial or frugal culture, vitamins, paper chromatogram and other laboratory and investigative procedures."Shital" U.V. is all acrylic sheet fabricated , tough unit having magnetic latch door from front and two sides and top viewing window. It is compact and needs very little table space of 12" x 15". The unit is very light and portable. The rubber leg gives vibration on free operation. The inside paint is special shade which is U.V. Absorbing. This prevents the reflection of U.V. radiation to the viewers eyes. The observation window is specially designed and placed at correct angle and distance which is most convenient for observations from standing or seated positions.

" Shital " U.V. cabinet is compact light unit suitable for use in any laboratory , bank , offices and other places where long-wave , short -wave , U.V. inspection is to be done. In addition to U.V. sources a white visible daylight is also provided in cabinet for convenience of placing samples. It is designed to examine samples under long wave U.V. of 365nm or short wave U.V. of 254 nm . A thin layer chromatography (tlc) plates of 30 mm x 250mm can be placed inside the cabinet. The unit is useful for examination of documents , stamps, notes, cheques, for forgeries and also for plant specimens, minerals , textiles , bacterial or frugal culture, vitamins, paper chromatogram and other laboratory and investigative procedures."Shital" U.V. is all acrylic sheet fabricated , tough unit having magnetic latch door from front and two sides and top viewing window. It is compact and needs very little table space of 12" x 15". The unit is very light and portable. The rubber leg gives vibration on free operation. The inside paint is special shade which is U.V. Absorbing. This prevents the reflection of U.V. radiation t\o the viewers eyes. The observation window is specially designed and placed at correct angle and distance which is most convenient for observations from standing or seated positions.All the components fitted inside the unit are covered and there is no obstruction while observing the samples. Any components like tube, switch, choke etc. Is easily replicable and very convenient for servicing. As the doors are also provided from two sides , it is possible to inspect long samples without disturbing the structure.

The Shital friability test apparatus is designed to study the friability determination of pharmaceutical tablets.A central shaft carries a holding screw, on which the acrylic drum is mounted. The drum is rotated at approx 25 rpm, thus at each turn the tablet slides and falls about 130mm on the wall.The apparatus is suitable for working on 230 volts single phase A.C. 50 cs.

TABLET DISINTEGRATION TEST MACHINENEW I.P 1985 SPL Electrically operated for finding out disintegration time of tablets. Supplied with one Basket Rack Assembly , 6 Nos. Glass Tubes 6 No. Guided Discs. One Horizontal Clamp, with 6 ft connecting cable. The machine complies with the specification as per I.P 1985 SPL. Works on 230 Volts single Phase AC 50 C/S 

Automation Grade : Semi-Automatic, Fully Automatic, Manually Automatic

Driven Type : Electric

Number Of Flower : Soxhlet Extraction Mantles

Capacity : 250-500 ml, 500-1000 ml

Country of Origin : 110V, 220V, 280V

Material : Stainless Steel, Mild steel, Metal

Number Of Flower : Shaking Incubators

Material : Aluminum, Metal, Mild Steel, Stainless Steel, Steel

Application : Medical Use

Country of Origin : 110V, 220V, 380V

Condition : New, Used

Volume : 100-150ltr, 150-200ltr, 200-250ltr, 250-300ltr, 300-350ltr

Automation Grade : Fully Automatic, Semi Automatic

To determine the sedimentation value of the flour as a measure of protein quality and quality based on swelling of protein globules and agglomeration of starch into protein globules in the lactic acid medium.  The wooden rack is provided to hold the glass cylinder 5 nos.  The rack is driven by motorized arrangement to give the 40 oscillation per minute.  Through angle of 30 deg from horizontal on each side.  An optional digital timer is provided for easy and accurate test of shaking cycles.  The above shaker is also available with platform to hold Petri dishes, tissue slides etc.  For clinical and chemical investigation of in the microbiological research of gel staining cultures.  Aeration and bathing bolted membranes samples for uniform mixing or setting. At an extra cost. Supplied with electronic digital timer with buzzer re-set switch and calibration certificate.

Maximum load 40 kgsComplete with three rollers of 45 cm long rubber cover70 rpm , ¼ hp single phase , 230 volts ac motor 1440 rpm Supplied without pots and balls.Ideal for dry or wet grinding and mixing of powder, paints pigments etc.Jars stay centered , wont work of roll.No clamping or fastening of jar required.Three position adjustment securely mounts idler roll. 

SHITAL HOT AIR OVENS : Shital make ovens are designed ,fabricated and tested to suit various applications in ever growing field of medical , agricultural , industrial research for day to day heating , drying , sterilizing , baking etc. In laboratories , hospitals and industries. It is also useful to destroy bacteria , virus , fungus by application of dry heat. CONSTRUCTION : Shital ovens are sturdy , double or triple wall Memmert type (heating elements from three sides) construction with complete inner chamber made of aluminum or stainless steel . Outer cabinet is made out of CRCA sheets which are properly treated for degreasing and rusting . The outer is painted with duco paint . 50 to 65 mm gap is filled with glass wool for proper insulation to avoid heat losses. Inner chamber is provided with runners to hold the shelves. The oven is provided with 2 to 3 shelves as per the different height of the inner chamber. The shelves are G.I. crimp wire mesh. Door is fitted with heavy casted chrome plated hinges with roller type spring loaded latch and catch. HEATING ELEMENTS : The heating elements are made of nickel-chrome 80/20 nichrome wire which are fixed on porcelain insulator and mounted on asbestos mill board having stainless steel screw as terminals which are heat and corrosive resistance. Such type of two  or multiple are fitted at bottom with perforated cover proper air circulation. Heaters are connected with three heat switches for low / medium and high temperatures. TEMPERATURE CONTROL : Temperature  is generally controlled by "ego" German make  liquid expansion type S.S. steam , capillary type thermostat having temperature range from 50.c to 300.c . The normal temperature range of the oven is upto 250.c. Temp control knob is graduated in 0.c. As the marking on the knob are not very accurate the actual temperature is to be adjusted with reference to the thermometer. The provision is provided to insert glass thermometer from the top of the unit. OR OPTIONAL: by electronic digital temperature controller cum indicator with international calibration certificate & pt-100 sensor. VENTILATION : An adjustable ventilator is fitted on the top of the oven to ventilate gas/fumes if any and to help air circulation. A hole is provided at the bottom of the unit for air inlet. ELECTRIC SUPPLY : The oven is provided with 3 core cable and moulded plug of suitable capacity to plug in the oven  to 15amps.single phase 230 volts a.c. 50hz mains. OPTIONAL ACCESSORIES : 1) Air circulation fan with motor for uniform temperature throughout the chamber                                       2) Digital temperature controller-cum indicator with pt 100 sensor for temperature accuracy  ± 1ºc  3) Electronic digital timer with alarm        

We are the main supplier of this product.

Number Of Flower : Muffle Furnace

Material : Aluminum, Iron, Plastic, Stainless Steel

Availability : 100-300kg, 1000-1500kg, 1500-2000kg, 2000-2500kg, 300-500kg, 500-700kg, 700-1000kg

Condition : New, Used

Application : Heating Process

Driven Type : Electric, Hydraulic, Pneumatic

Automation Grade : Automatic, Fully Automatic, Manual, Semi Automatic

This apparatus is used for the determination of single or mixed melting points of most organic substances in powder form. These substances , which are opaque at ambient temperature become transparent on melting. The melting point is noted on a mercury-in glass thermometer just when the substance under test starts melting.The apparatus consists of an aluminum block in which three small holes for inserting thin glass capillaries , and one larger hole to accommodate a mercury in- glass thermometer are provided. The aluminum block is heated from two sides by clamped-on nichrome wire strip heaters which are electrically insulated. The block assembly is housed in an aluminum casting housing which is finished in elegant paint.  The thin glass capillaries which are inserted into the three holes in the aluminum block are illuminated by an incandescent lamp and are seen magnified by the use of a built-in double convex lens. This eliminates the strain of viewing the thin glass capillaries in which the powders under test is / are placed.The rate of rise of temperature of the aluminum block is controlled by a rotary rheostat built into the apparatus. The glass capillaries are in thermal contact with the aluminum block and therefore heat transfer is efficient. When the substance starts melting, the temperature as indicated by the inserted thermometer is noted , which is the melting point temperature of the particular substance.  A boost heater to heat the block rapidly is also provided. Put of booster heater when temperature will reach 25ºc to 30ºc below the required temperature (i.e. Rough melting point of the substance) . Slow heating will help to give accurate melting point. As an optional accessory , a cooling plug to bring down the temperature can be supplied, which is to be inserted in the hole where thermometer bulb was kept . Cooling takes place by circulation of water in the cooling plug which has an inlet outlet.

These are designed for the utmost in convenience, safety and dependability and are typically useful for biochemical analysis, distillation studies, mixing solutions, stirring oil solutions and a multitude of other laboratory tasks. These variable speed magnetic stirrer having facility of soft start & restart. Soft start facility increases the speed of rotation slowly which does not allow Teflon magnetic bit to slip from its center. Restart switch is provided to bring the Teflon bit at the center. Speed knob is to regulate the speed of stirrer. Heat control knob is to regulate the heat of the hot plate.   SPECIFICATION :SSI – 74(a) capacity 2 litres without hot plateSSI – 74(b) capacity 2 litres with hot plateSSI – 74(c) capacity 5 litres without hot plateSSI – 74(d) capacity 5 litres with hot plateSpeed variable upto 1000 rpm depending on loadCapacity 2 litres dimensions 150 mm x 150 mm x 100 mm (2 kgs)Capacity 5 litres dimensions 190 mm x 190 mm x 100 mm (3 kgs)  HIGHER CAPACITY MAGNETIC STIRRER WITHOUT HOT PLATE CAN ALSO BE MADE FOR – 10 litres20 litres50 litres100 litres

These constant temperature baths are designed to carry out calibration work as well as research work in different laboratories of industries and research institution where high degree of accuracy is required.CONSTRUCTION :These are doubled wall table top or floor units with puff or glass wool insulation having stainless steel sheet with angle frame structure and painted in duco paint. Provided with bottom discharge and pump for internal and external circulation. The unit is mounted on caster wheels for mobility.  TEMP, COOLING & HEATING SYSTEM :These baths have different range of temperature. But the normal range of temperature is from -70°c to 50°c ± 1°c. The sealed compressor and air cool condenser with other accessories are assembled at bottom of the unit and cooling coils on inner chamber. Heater and pump from top. Digital temperature controller-cum-indicator with audio signal for temperature and control below and above ambient. Single phase A.C. 50hz 240 volts main supply.    

These low temperature chambers are designed for storing of blood components , serum , vaccines , biological and medical specimens , clinical samples , at low temperature in various laboratories.Construction :Double wall with air circulation for uniform temperature. Top opening horizontal models. The exterior is made of mild steel sheet duco painted and interior stainless steel. Glass wool or puff insulation. Cooling system at bottom. Control panel on side or top with digital temperature controller-cum-indicator units are mounted on coaster wheels for mobility.  COOLING HEATING AND TEMPERATURE CONTROL : The temperature range of these cabinets is normally from -70°C to + 50°C. The cooling and heating system is incorporated. Sealed compressor with accessories and evaporator fitted inside the chamber achieved low temperature and heater assembled in inner chamber gives temperature above ambient. Temperature is controlled by digital temperature controller to accuracy of 60.2°c or better. Single phase A.C. 50hz 240volts supply.  TYPE                                         SIZE                                TEMPERATURE RANGESSI / 84                       18" x 18" x 24"                       -20°c TO +50°cSSI / 84                       18" x 18" x 24"                       -40°c TO +50°cSSI / 84                       18" x 18" x 24"                       -70°c TO AMBIENT

ADVANTAGES• SHITAL AUTOMATIC AUTOCLAVES ARE IDEAL FOR ALL APPLICATIONS REQUIRING                DESTRUCTION OF ALL LIVING MICROORGANISMS.• REPRODUCIBLE RESULTS AND REQUIRING NO MANUAL ATTENTION• A TOTALLY TENSION FREE WORKING• SUPPLIED WITH TRACEABLE CERTIFICATES FOR PRESSURE GAUGE AND DIGITAL    CONTROLLER  STANDARD FEATURES (ELECTRONICS & ELECTRICAL)• DIGITAL CONTROLLER WITH TIME AND TEMPERATURE ADJUSTABLE BY USER• PT 100 SENSOR FOR ACCURATE AND PRECISE CONTROL• LOW WATER LEVEL ALARM CUT OFF• SENSOR OPEN/SHORT SIGNALS• MINIATURE CIRCUIT BREAKER FOR ON/OFF PLUS SAFETY• INDUSTRIAL GRADE HEATER  MECHANICAL• HEAVY STAINLESS STEEL LID IS FITTED WITH CLAMPS, PRESSURE GAUGE , SAFETY VALVE,    MANUAL EXHAUST VALVE, VACCUM BREAKER CUM PURGE VALVE etc.• PEDAL LIFTING DEVICE FOR LID• DRAIN VALVE AT BOTTOM• MOULDED SILICONE GASKET• STAINLESS STEEL CONSTRUCTION INCLUDING HEATER COVER/STAND         SIZE OF WORKING CHAMBER                  ACTUAL SIZE OF INNER CHAMBER          WATTS (A)    25 cms DIA x 45 cms Ht   (10” X 18”)                               10” X 22”                                 1.5 KW (B)     30 cms DIA x 50 cms Ht   (12” X 20”)                               12” X 24”                                 2.0 KW (C)     35 cms DIA x 55 cms Ht   (14” X 22”)                               14” X 26”                                 3.0 KW (D)     45 cms DIA x 60 cms Ht   (18” X 24”)                               18” X 28”                                 4.0 KW    (E)  55 cms DIA x 75 cms Ht   (22” X 30”)                                 22” X 34”                                 6.0 KW

Kjeldahl digestion and distillation unit is made of mild steel angles with two shelves one above the other, painted in attractive black enamel.in lower portion a fume duct and a heater box are provided for digestion part. The open type heaters are made of 80/20 nichrome elements embedded in refractors. The heaters have individual energy regulators for fine control.in the upper portion another heater box with a condenser rack made of brass rods and tubes are given for distillation part.the six receiver flasks can be put at back-shelf of the stand.total rating 3000 watts, suitable for 500ml – 800ml Kjeldahl flasks.

SHITAL DIGITAL FLOCCULATOR has been specially designed for use in water treatment plants as jar test apparatus to correctly estimate the dosing of alum and other such coagulants for treatment of water & sewage. It provides identical test conditions for all samples. It is suitable for continuous run in any busy laboratory to determine sulphate concentration and for measuring suspended matter and colloids general.Flocculator consist of electronically controlled variable speed electronic motor. Speed controller is provided to control stirrers from 5 to 150 rpm. Stainless steel stirring paddles are provided.Each stirring shaft can be removed without disturbing other stirrers. Illuminator base consist of fluorescent tube mounted below translucent acrylic sheet to provide diffused cold light through floc samples.

Drum Heaters provide an easy, efficient, clean & economical way for the handling of viscous or low melting point solidified materials in Drums. Such materials include Asphalt, Bitumen, Fats, Gelatin, Glucose, Grease, Lubricating Oils, Paints, Petroleum Jelly, Phenols, Plastics, Sodium Tar, Vegetable Oils, Varnishes, Waxes etc.     Drum Heaters are mobile ovens heated by flexible surface heaters made from imported Nichrome 80/20. They are made in rugged designs and stand normal usage in chemical industries. They can be used for heating the contents of drums kept in the vertical or horizontal positions. The contents may either be melted completely and removed as a liquid, or they may be melted only at the surface touching the drum walls and removed as a solid block by tilting the drum. The heating in Drum Heaters is gentle and uniform, and there is no chance of local overheating.  

We are the main supplier of this product.

Number Of Flower : Bacteriological Incubator

Material : Aluminum, Metal, Mild Steel, Stainless Steel, Steel

Application : Medical Use

Country of Origin : 110V, 220V, 380V

Condition : New, Used

Volume : 100-150ltr, 150-200ltr, 200-250ltr, 250-300ltr, 300-350ltr

Automation Grade : Fully Automatic, Semi Automatic

Number Of Flower : Hot Plates

Shape : Rectangular

Application : Cooking, Laboratory Use

Availability : 15kg

Country of Origin : 110V, 220V, 380V

Condition : New, Used

Automatic Grade : Manual, Semi Automatic

Power Source : Electric

Total Carbohydrate : 1year

Body is made of thick gauge CRCA sheet with duco painted. Top plate is made of heavy cast iron plate having grooves to accommodate nichrome wire heating element which is embedded with porcelain insulation beads. The top plate is also packed with mill board sheet. The top plate is fitted by supporting ceramic pillars which serve as air insulation. Due to this the controls are not affected by spillage in this design. Temperature is controlled by built in or separate energy regulator box. Four sturdy rubber / metal legs are provided to protect table top.Available in MS, CI & SS Top plate8" DIA 20 cms 12009" DIA 22.5 cms 150012" DIA 30 cms 2000Available in both CI and SS top plateMax surface temperature 300ºc