Solar Thin Film Dealers in Mumbai (222 products available)

• Country of Origin: India

• Type: Solar Panel
• Certification: CE Certified
• Application: Industrial, Toproof
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power Source: Solar
• Warranty: 1Year
• Solar power: 1Kw, 250W, 500W, 750W

We are reputed firm engaged in offering our clients a wide spectrum, of Solar Panel Lights. With a Client approach mentality, we are offering Panel Lights, that are obtained from relevant and reliable vendors of the market who use quality materials.

1.surya  series   (3wp - 37wp) type:- 18/36 cells, range: 3wp - 37wp   2.arka  series   (40wp - 95wp) type- 36 cell mono/polycrystalline solar pv module key features: superior module efficiency as per international benchmarks positive power tolerance   3.surya  series   (3wp - 37wp) type: 18/36 cells, range: 3wp - 37wp   4.aditya  series   (250wp - 370wp) type: 60/72 cells polycrystalline solar pv module   5.aditya  series   ws-255 to ws-370 (mono) type: 60/72 cells mono crystalline solar pv module key features   6.bipv  modules   essentially, building integrated photo voltaic (bipv) refers to photovoltaic cells and modules which can be integrated into the building envelope as part of the building structure, and therefore can replace conventional building materials, rather than being installed afterwards.    .

• Wattage: 45W (max)
• CCT [K]: 2700, 3000, 3100, 3500, 4000, 5700
• Input: 220-240V
• DC Current: 1200mA (max)

The MODUL system is an adaptation of the NOVA L recessed spot. The modules use a linkable frame assembly to be linked in infinite configurations. Suitable for an LED lamp with a lumen output of 5063 lm producing a IRUV-free light, with an efficient energy balance between heat and light. Asymmetrical gimbaled suspension allows the spot to be swivelled through 45° and rotated through 355°, achieving a maximised, uncut beam with minimal visible outline. The innovative reflector technology uses anodized aluminium making it virtually glare free. Tool-less interchangeability of reflectors offers a wide range for SP, MFL & WFL beams. Compact, pressure die-cast body reduces cutout diameter.

Following the strict packaging guidelines, we make sure that the range of products we offer are packed sternly to evade lossdamage. By this, we ensure that the products are in safe condition during handling, warehousing and transportation. We ensure on time distribution of wholesale as well as retail consignments owing to an extensive vendor, distributor and logistic facility base.

We offer a wide range of Solar Modules in the market. The Solar Modules made accessible by us are energy efficient and work on solar energy without any hassle. Our Solar Modules are available from the weight of 5gm to 200gm as per the requirements. They are also available in different dimensions according to the demand of the clients.

• Type: Polycrystalline;Monocrystalline
• Rated Voltage: 12VDC
• Model Number: PW-3;PW-100;PW-250;PW-300
• Place of Origin: India

- we are manufacturing solar panels from 3w-320w polycrystalline as well as mono crystalline - tuv,ce, ul certified. - 25 years warranty - manufactured with each and every cell and modules tested - high quality insulation and aluminium used

We are manufacturing all kind of disposable products like disposable plates egg tray disposable disposable tray fish tray disposable food tray seedling tray.

• Features: High quality High efficiency Good warranty

We are one of the leading manufacturers and suppliers of these Polycrystalline Solar Panels. Being a market leader, we manufacture these using the best quality raw materials available in the market. The products, with their utmost efficiency, convert solar energy into usable power, and are highly asked for in the market. Being one of the leading suppliers and exporters of these panels, we provide our clients safe and timely delivery as well.

• Type: Solar Electric Panels
• Certification: CE Certified, ISO 9001:2008
• Application: Home, Hotel, Industrial, Industry, Toproof
• Weight: 10-100kg
• Condition: New
• Automatic Grade: Automatic
• Power Source: Solar
• Warranty: 5Year
• Operating Voltage: 12V, 24V
• Solar power: 1Kw, 250W, 500W, 750W
• Size: Different sizes
• Brand Name: Different Makes
• Material: Polycrystalline And Monocrystallinee

Panels for single phase grid & three phase grid , ranging from 1.5kw to 50 kw can be installed depending on load approved.

We are one of the leading Manufacturers and Suppliers of Solar Panels in Bihar (India). The Solar Panels, we deal in, are well constructed because of which they are appreciated for durability and eco-friendliness. These panels are highly beneficial for the environment when compared to other lights. In addition to that, these panels are made available at reasonable prices. We make them available in bulk quantities to your desired destination at the said time.

• Application: Industrial, Toproof
• Condition: New
• Operating Voltage: 24 V
• Maximum Power: 1 - 10 W
• Short circuit current: 0.80 - 2.80 A
• Features: Easy to install
• Open Circuit Voltage: >40 V
• Install on: Roof

We are offering us a high quality range of environment friendly solar cells & modules. These modules offer a stable performance for multipurpose outdoor applications. Manufactured using high quality raw material, these are highly resistant to the severest climatic conditions. We offer an unmatched 25 years warranty on these products for power output. These technologically advanced products feature bypass diodes, which reduce the power loss caused by shade. The modules use high efficiency 125 mm square mono-crystalline silicon solar cells with over 14% module conversion efficiency. material monocrystalline siliconpolycrystalline siliconamorphous silicon photovoltaics: solar electricity and solar cells in theory and practice the word photovoltaic is a combination of the greek word for light and the name of the physicist allesandro volta. It identifies the direct conversion of sunlight into energy by means of solar cells. The conversion process is based on the photoelectric effect discovered by alexander bequerel in 1839. The photoelectric effect describes the release of positive and negative charge carriers in a solid state when light strikes its surface. how does a solar cell work? solar cells are composed of various semiconducting materials. Semiconductors are materials, which become electrically conductive when supplied with light or heat, but which operate as insulators at low temperatures. over 95% of all the solar cells produced worldwide are composed of the semiconductor material silicon (si). As the second most abundant element in earth`s crust, silicon has the advantage, of being available in sufficient quantities, and additionally processing the material does not burden the environment. To produce a solar cell, the semiconductor is contaminated or "doped". "doping" is the intentional introduction of chemical elements, with which one can obtain a surplus of either positive charge carriers (p-conducting semiconductor layer) or negative charge carriers (n-conducting semiconductor layer) from the semiconductor material. If two differently contaminated semiconductor layers are combined, then a so-called p-n-junction results on the boundary of the layers. at this junction, an interior electric field is built up which leads to the separation of the charge carriers that are released by light. Through metal contacts, an electric charge can be tapped. If the outer circuit is closed, meaning a consumer is connected, then direct current flows. silicon cells are approximately 10 cm by 10 cm large (recently also 15 cm by 15 cm). A transparent anti-reflection film protects the cell and decreases reflective loss on the cell surface. the usable voltage from solar cells depends on the semiconductor material. In silicon it amounts to approximately 0.5 v. Terminal voltage is only weakly dependent on light radiation, while the current intensity increases with higher luminosity. A 100 cm² silicon cell, for example, reaches a maximum current intensity of approximately 2 a when radiated by 1000 wm². the output (product of electricity and voltage) of a solar cell is temperature dependent. Higher cell temperatures lead to lower output, and hence to lower efficiency. The level of efficiency indicates how much of the radiated quantity of light is converted into useable electrical energy. different cell types one can distinguish three cell types according to the type of crystal: monocrystalline, polycrystalline and amorphous. To produce a monocrystalline silicon cell, absolutely pure semiconducting material is necessary. Monocrystalline rods are extracted from melted silicon and then sawed into thin plates. This production process guarantees a relatively high level of efficiency. the production of polycrystalline cells is more cost-efficient. In this process, liquid silicon is poured into blocks that are subsequently sawed into plates. During solidification of the material, crystal structures of varying sizes are formed, at whose borders defects emerge. As a result of this crystal defect, the solar cell is less efficient. if a silicon film is deposited on glass or another substrate material, this is a so-called amorphous or thin layer cell. The layer thickness amounts to less than 1µm (thickness of a human hair: 50-100 µm), so the production costs are lower due to the low material costs. However, the efficiency of amorphous cells is much lower than that of the other two cell types. Because of this, they are primarily used in low power equipment (watches, pocket calculators) or as facade elements. level of efficiency in % lab approx. 24approx. 18approx. 13 level of efficiency in % production 14 to1713 to155 to7 from the cell to the module in order to make the appropriate voltages and outputs available for different applications, single solar cells are interconnected to form larger units. Cells connected in series have a higher voltage, while those connected in parallel produce more electric current. The interconnected solar cells are usually embedded in transparent ethyl-vinyl-acetate, fitted with an aluminum or stainless steel frame and covered with transparent glass on the front side. the typical power ratings of such solar modules are between 10 wpeak and 100 wpeak. The characteristic data refer to the standard test conditions of 1000 wm² solar radiation at a cell temperature of 25° celsius. The manufacturer's standard warranty of ten or more years is quite long and shows the high quality standards and life expectancy of today's products. in addition to optimizing the production processes, work is also being done to increase the level of efficiency, in order to lower the costs of solar cells. However, different loss mechanisms are setting limits on these plans. Basically, the different semiconductor materials or combinations are suited only for specific spectral ranges. Therefore a specific portion of the radiant energy cannot be used, because the light quanta (photons) do not have enough energy to "activate" the charge carriers. On the other hand, a certain amount of surplus photon energy is transformed into heat rather than into electrical energy. In addition to that, there are optical losses, such as the shadowing of the cell surface through contact with the glass surface or reflection of incoming rays on the cell surface. Other loss mechanisms are electrical resistance losses in the semiconductor and the connecting cable. The disrupting influence of material contamination, surface effects and crystal defects, however, are also significant. single loss mechanisms (photons with too little energy are not absorbed, surplus photon energy is transformed into heat) cannot be further improved because of inherent physical limits imposed by the materials themselves. This leads to a theoretical maximum level of efficiency, i.e. Approximately 28% for crystal silicon.

Solar panel is the most convenient and green means of generating electricity using solar energy.We offer panels ranging from 3 Wp to 310 Wp.We provide the perfect solution for electricity generation from sunlight in an efficient and environment friendly manner by means of Solar PV Modules. Features:- High efficiency pid free mono / poly crystalline silicon solar cells. 6V, 12V, and 24V Modules available in wide range of wattages. Highly resistant to rain, water, abrasion and hail impact. Anodized aluminum frame with pre-drilled mounting holes. High impact resistant, toughened glass. High quality, dust and water proof junction box. Customised sizes / design & specifications also undertaken.

Solar panels turn energy from the sun’s rays directly into useful energy that can be used in homes and businesses. There are two main types: solar thermal and photovoltaic, or PV. Solar thermal panels use the sun’s energy to heat water that can be used in washing and heating. PV panels use the photovoltaic effect to turn the sun’s energy directly into electricity, which can supplement or replace a building’s usual supply. We have carved a niche as the reliable Manufacturer and Supplier of high-quality Solar Panels. The solar panel that we offer are developed by utilizing top-notch quality material and sophisticated technology keeping in pace with the laid industry standards and norms. With features like reliability, user-friendliness, easy installation and corrosion resistance, these Solar Panels with 25 years warranty are widely used for commercial as well as domestic purposes. Talk of price, we offer the best quality at reasonable prices. Details The Solar Panels offered by us are a form of active solar power that efficiently describes the working of solar panels and use of the energy of sun. These panels harvest sunlight and convert it into electricity. Moreover, these solar voltaic cells collect sunlight during day hours and convert it into electricity in an efficient manner.

We are India's largest Solar PV Module Manufacturer with installed capacity of 500 MW Per annum. Our State of the art facility in Surat, Gujarat manufacturers Poly & Mono crystalline Si PV modules from 3Wp to 400 Wp. Our high quality Solar Modules are made by using the best efficiency solar cells procured from renowned & best suppliers in the world. We thrive on quality, efficiency, & performance. Our High efficiency Solar PV Modules are globally recognized for best in class output & reliability. Waaree Solar PV modules are PID resistant, with power tolerance upto +5W.

Foley Balloon catheter, Urine CollectionDrainage Bag, Urethral Catheter, External Male Condom catheter.

We are Offering Solar Pv Modules.

Photovoltaics are best known as a method for generating solar power by using solar cells packaged in photovoltaic modules, often electrically connected in multiples as solar photovoltaic arrays to convert energy from the sun into electricity.

We are offering pv solar panels. High conversion efficiency - leading innovative photovoltaic technology. High reliability - guaranteed power output, faster roi. Consistent field performance and high longer durability. Approval for high wind-pressure, snow load rated and extreme climatic variations. Consistent field performance and durability. Proven track record.

Jain Photovoltaic Modules are made from high efficiency Mono / Multi Crystalline solar cells The cells used are of 14.0% to 17.5% efficiency. The cells are encapsulated in a low iron content, high transmissivity, tempered glass using UV stable Ethylene Vinyl Acetate (EVA) sheets. The premium quality back sheet protects the cells from the environmental conditions. The laminates are framed with strong and anodized aluminum profile with multiple holes for ease of installation. PV modules are fitted with 2/3/4 terminal junction box, depending on application. The mdoules with 4 terminal junction boxes are generally fitted with by-pass diodes.

We are offering solar panel. We furnish the finest quality of solar power panels in the market. The residential solar panels made available by us are scientifically developed for various applications pertaining to energy saving measures. They are remarkable for long lasting functional life. We offer them at most competitive rates in comparison to the ordinary market. In addition to the above we are counted as one of the most trusted names among the leading solar panels suppliers from india. solaire meets your power needs using photovoltaic (pv) technology. Our solar electric systems supply reliable power where and when you need it. We select our panels and systems for maximum efficiency and minimum on-site construction time and operation costs. how light & temperature influence performance? based on the site conditions & application the appropriate panel suitable for the performance required are selected from a variety of manufacturers.eg the higher the exposure to sunlight, the more voltage is released in the solar cells, & the higher the performance of the photovoltaic installation. In the morning & evening as well as in fog or under thick cloud cover, performance is lower but the rightly designed photovoltaic installation still produces electricity in diffuse light. the lower the temperature, the higher the voltage released in the solar cells & thus high electricity generation. It may seem counterintuitive but solar modules function better in colder weather than in blazing heat. Hence here it is important that the solar modules are to be perfectly ventilated thereby lowering their core temperature & increasing their performance. we design custom systems and products to satisfy specific load and environmental requirements from a large selection of solar modules and balance of system component. Since many projects include a variety of requirements and special considerations, we offer specific solar modules manufactured in india as power warantee is to be considered for 25 years indestructible solcharger modules sunwize solcharger solar modules are designed to be lightweight, unbreakable, high-performance alternatives to traditional laminated, framed solar modules. Unlike a framed module, which laminates solar cells between plastic and glass surfaces, a solcharger uses its proprietary two part urethane technology to fully encapsulate the solar cells. The urethane polymer is a fast-setting compound that is impact resistant with high light transmission. The compound is uv stable; capable of surviving repeated thermal cycles and is virtually unbreakable under normal operation. Solchargers are ideal for powering equipment such as roadside call boxes, automated parking meters, fence chargers, and traffic control devices, where the risk of vandalism and impact from projectiles is present.

• Size: 5 watt
• Brand Name: osia
• Warranty: 1 year warranty
• Model Number: osia123
• Place of Origin: india

We are offering solar panel of 12 volts 5watts, high – quality cells, wide power range, tempered glass for rugged protection rs. 965.00-

Avail the best quality Disposable safety products from us at the most reasonable prices. The entire range of disposable products offered by us is used extensively in hospitals and various other industrial segments, especially, pharmaceuticals, chemicals, food etc. We offer these products in various sizes and dimensions as per client's demand and application area. Disposable products offered by us include: Disposable Face MaskDisposable Surgical Caps/Bouffant Caps/Nurse Caps/Hood CapsDisposable ApronsDisposable Plastic GlovesShoe CoversVenus Face ProtectionDust, Nuisance Respiratory ProtectionHead Protection

We are offering solar panel 2w upto 300w polycrystalline.

• Brand: Polycab
• Solar Panel Type: Polycrystalline
• Wattage (Wp): 335 Watt
• Operating(Nominal) Voltage: 1500 V
• Number of cells: 72 cells
• Frame Size: 40 mm
• Linear Performance Warranty: 25 Years
• Features: Anodized aluminium alloy frame for robust protection, PID free Modules with extra-long-term reliability, Better performance even at low Irradiance condition