Stepper Motors Dealers in Mumbai

(42 products available)
  • High Vacuum Motors, High Temperature Steppers Motors

    High Vacuum Motors, High Temperature Steppers Motors

    Get Price Quote

      High Vacuum, High Temperature Steppers Motors Stepper motors for vacuum applications up to 10-11 hPa Temperature range from -270 to +300oC Holding torques from 3.4 mNm to 9.9 Nm Diameters 19 to 125 mm Special design for clean room or space applications Optional: gears, couplings, 2nd shaft, temperature sensor, etc.,  
    ...more
  • Closed Loop Stepper Motors

    Closed Loop Stepper Motors

    Get Price Quote

    Leadshine offers Closed Loop Stepper Motors (stepper motors with encoders) of NEMA 17 to 34 integrated with 1,000-line incremental encoders.Made of high quality materials such as Japanese made bearings and shafts, those closed loop stepper motors are highly reliable with excellent performance including high precision, low vibration, low motor heating, and low vibration.
    ...more
  • BRAKE STEPPER MOTOR

    BRAKE STEPPER MOTOR

    4,850 / Piece

    • Brake Details (Torque / Operating Voltage)1Nm/24VDC
    • Holding Torque (Kgcm/Nm)3.6 / 0.36
    • Operating Voltage12-24
    • Current/ Phase1.68
    • Resistance/ Phase2.1
    • Inductance/ Phase1.8
    ...more
  • Bipolar Stepper Motor

    Bipolar Stepper Motor

    Get Price Quote

    • speed ranging60 to 600 RPM.
    • These drives are extremely useful in precise control of speed and position. They are mostly used in moderate speed ranging from 60 to 600 RPM. Low inertia loads go well with these drives. They find application in wire cutting, linear indexing for welding automation with screw mechanism, oscillating motions, rotary indexing, label applicators, X-Y tables etc. These can be packaged with controller in single enclosure for stand-alone units to reduce wiring hassles.
    ...more
  • Stepper Motor Controller

    Stepper Motor Controller

    Get Price Quote

    • Step Angle1.8 Degree
    • No. of Phase2
    • Dimension96 X 192 X 65mm D
    • Operating Voltage24VDC / 230VAC, 50Hz
    • Mounting TypePanel
    • Model Name/NumberNema 34
    • Motor TypeBipolor, Unipolor
    • Current<100 mA, 101-400 mA, 401-800 mA
    ...more
  • Stepper Motor

    Stepper Motor

    Get Price Quote

    • Country of Origin2.8 V
    • Current1.3 A
    • Holding Torque3.6 Kg-cm
    • Rotor Inertia68 g-cm2
    • Resistance1.7 Ohm
    • Inductance2.3 mH
    • No. of Leads4
    ...more
  • Stepper Motor

    Stepper Motor

    Get Price Quote

    • Dielectric Strength500 VAC for 1minute
    • Shaft Radial Play0.02Max. (450g-load)
    • Shaft Axial Play0.08Max. (450g-load)
    • Availability450 g
    • Temperature Rise80 max
    • Ambient Temperature20
    • Max. Axial force10N
    • Item CodeOMP-3D013
    ...more
  • AC Step Synchronous Motor

    AC Step Synchronous Motor

    750 - 9,500 / Piece

    • MOQ1 Piece
    • Number Of FlowerAc Synchronous Motors
    • ApplicationServo stabilizer, valve actuator, packaging machines,printing machines
    • Availability10-20kg
    • Country of Origin220V
    • ConditionNew
    • Automatic GradeManual
    • Power9-12kw
    • Driven TypeElectric
    • PhaseSingleTwo
    • Current TypeAC
    • Speed60rpm
    • Country of OriginIndia
    • Brand NamePro-Syn
    • Frequency50
    • Efficiency50%
    • Continuous Current(A)0.1-3A
    • We are among the first rated AC Step Synchronous Motor manufacturers. Our AC Step Synchronous Motors are manufactured with latest tools and technologies used in the manufacturing process. Highly sturdy and durable material is used to manufacture AC Step Synchronous Motor. Our AC Step Synchronous Motor is suitable for wider range of AC and stepper motor of different configurations. Our AC Step Synchronous Motor eliminates the need for larger external heat sinks. It requires no bootstrap capacitors, and can be operated in analog mode, two-quadrant digital mode, or four-quadrant digital mode.
    ...more
  • Linear Stepper Motor

    Linear Stepper Motor

    Get Price Quote

    • Number Of FlowerStepper Motor
    • ApplicationCreating Translational Motion
    • Country of Origin5-12 V
    • MaterialMetal
    • ColorSilver
    • Life SpanExtended
    • Load CapacityHigh
    • Portescap 's stepper motor linear actuator creates translational motion with the simple operation of a stepper motor resulting in a cost effective and reliable motion solution. Achieving linear motion internal to the motor eliminates the cost of designing a transmission into the system, reducing the number of points for potential wear. Overall efficiency is improved by the linear stepper as a result of this reduction in external mechanical components. Linear stepper motors also hold their linear position without power utilizing the detent torque of the can stack motor, reducing the power requirements of the system when not in operation. The available captive design reduces overall size and produces purely translational motion while the non-captive linear stepper design provides longer travel stroke. The ball bearing design provides extended life of the linear actuator motor and enables higher load carrying capability. Digital control makes the linear stepper motor easy to control with a microprocessor without the need for positional feedback, as long as the stepper motor actuator is sized properly. Winding voltages of 5 and 12 V are standard but typically the linear stepper motors are run with a chopper driver which controls the current supplied. This allows the voltage to the motor to be increased, which provides a higher capability for the maximum speed that the linear stepper motor will operate at. The current supplied will dictate the torque output and can be set to match the load requirement of the application.
    ...more
  • Three Phase Stepper Motor Driver

    Three Phase Stepper Motor Driver

    5,500 / Piece

    • MOQ1 Piece
    • Brand NameLeadshine
    • Input PhaseThree Phase
    • Frequency50 Hz
    • Output Current7 10 16 mA
    • Usage/ApplicationIndustrial
    • Peak CurrentPulse + Direction
    ...more
  • Stepper Mini Motor

    Stepper Mini Motor

    Get Price Quote

    • Brand NamePortescap
    • Rotor Inertia0.12 gcm
    • Operating Voltage5.00 V
    • Diameter15 mm
    • Detent Torque, Max1.6 mNm
    ...more
  • DC Stepper Motor

    DC Stepper Motor

    Get Price Quote

    • PhaseTwo phase pair (four phase)
    • Dielectric Strength500V A.C. for 1 Minute
    • Iec Frame Sizes58 mm, 86 mm & 108 mm
    • Type                           Hybrid Type; Unipolar or Bipolar
    • Step Angles                 1.8° full step; 0.9° half step
    • Angular Accuracy          ± 5% non-cumulative (No load)
    • Swithching Sequence    4 step (Full step); 8 step (Half step)
    • Stator winding              Bifiliar, 6 leads or optional 8 leads
    • Operating Temp          -10° C to 50° C
    • Temp Rise                    Max 80° C
    • Insulation Class   Class B
    • Insulation Resistance     100 MΩ min. at 500 V.D.C.
    • Holding Torque        2 to 60 kg-cm in 12 models
    • Stepping motor is an electromagnetic device which converts digital pulses into discrete mechanical rotational movements. The motors are hybrid type unipolar or bipolar having   multi- toothed   rotor & stator. The rotor uses permanent magnet & the stator is two phase pair (four phase)   bifilar winding, with 6 leads or 8 leads.    STEPPING MOTOR WORKING :   The stepping action of motor shaft is caused by sequential switching of supply   to   the two phase pair of motor as shown in full step & half step logic sequence table. Motor direction can be  changed either by reversing logic   sequence direction or by interchanging connection of any one phase pair.         SPECIAL FEATURES :     1) A wide range of rotating speeds (stepping rate) proportional to the frequency of the pulse signal is   provided. 2) The rotating angle of the motor is directly proportional to the number of input pulses. 3) The angle error per step is very small & non-cumulative. 4) Rapid response to starting / stopping & reversing. 5) Digital input pulse signal provide open-loop control, thus making the system simple & avoiding the need   for closed loop system for less critical application. 6) Self-holding capability makes it possible for the rotor to be held in the stepped position without the use   of  brakes.    TERMINOLOGY :         1) Torque-Speed curve                     2) Holding Torque : It is the maximum torque require to change the step angle, When the stator winding     is in exciting state at the rated voltage.         3) Detent Torque : Torque created on the output shaft of a motor, when stator is in no exciting state &     whose rotor uses permanent magnet.         4) Step Angle : The nominal angle through which the shaft of a stepping motor turns in response to one     pulse signal.         5) Start-Stop Region : The region, in which a stepping motor can start, stop or reverse in synchronism     with the external pulse signal.         6) Slew Range : In the region above the start-stop region, a stepping motor can respond without loss of     synchronism, even when there is a gradual increase in the frequency or the torque load within this     region.         7) Pull-in Torque : The max. torque at which an energized stepping motor will start and run in     synchronism in the start-stop region.         8) Pull-out Torque : The max. torque which can be applied to the shaft of a stepping motor without loss     of synchronism, even when there is a gradual increase in frequency or load torque within the slew     range.         9) Resonance : When a motor is operated at its natural frequency, typically 90 to 180 pps or sometimes     in the higher frequency region, suddenly an increase in the audio and vibration depending on motor      model selected. In some cases motor will reverse or miss-step also.         10) Acceleration and Deceleration (Ramping ) : In most cases, a stepping motor cannot achieve high     speeds immediately when started and will overshoot if not decelerated from these speeds. Therefore,     acceleration and deceleration, or "ramping" as it is commonly known, must be provided to assure     realiable stepping and maintain positioning accuracy in the slew range region.    
    ...more
  • Stepper Motor

    Stepper Motor

    5,500 - 8,500 / Piece

    • Country of Origin240 V
    • Brand NameATS
    • Current2-4 A
    • Frequency50-60 Hz
    • Step Angle1.2-1.8 Degree
    • Motor Weight500-1000 g
    • Laser ClassificationCO2 Laser
    ...more
  • Hybrid Stepper Motor

    Hybrid Stepper Motor

    Get Price Quote

    • Number Of FlowerHybrid Stepper Motor
    • CertificationISO 9001:2008
    • ApplicationElecronic Use
    • The various types are Nema23 stepper motor, nema24 stepper motor, servo motor, nema17 stepper motor. Application in lane diverters, elevators, and conveyor belts 
    ...more
  • Stepping Motor

    Stepping Motor

    Get Price Quote

    • No. of Phase5 phase
    • Step Angle0.72 Degree
    • Country of Origin24 V
    • Torque0.0231
    • Motor TypeUnipolor, Bipolor
    • Model NamePKP Series
    ...more
  • Hybrid Stepper Motor

    Hybrid Stepper Motor

    Get Price Quote

    • No. of Phase2
    • Country of Origin2.5V
    • Step Angle1.8 Degree
    • Torque12.6 kg.cm
    • Current2.8 A
    • Model Number/NameJK57HS56-2804-01
    • Resistance Phase0.9 ohm
    ...more
  • Stepper Motor

    Stepper Motor

    750 / Unit

    • MOQ1 Unit
    • No. of Phase2
    • Step Angle1.8 Degree
    • Motor TypeBipolor
    • Availability350 g
    • Dimension42 mm x 42 mm x 48 mm
    • Resistance2.8 Ohms
    • Inductance5.5 mH
    ...more
  • Step Motor

    Step Motor

    Get Price Quote

    • size3.4
    • Step motor are available with two types of gearboxes. Synchronous or Stepper motor frame size 3.4" & 4.2" (motor dia. 86mm & 108mm) is coupled with cast aluminum gearbox.
    ...more
  • Tube Orientation Controller (24VDC)

    Tube Orientation Controller (24VDC)

    15,000 - 25,000 / Unit

    • ApplicationTube Filling Machines. Ointment, Colour, Gel Filling Machines
    • InputsStart signal to run the stepper motor(PNP/NPN), Mark sensor (PNP/NPN), Stepper Speed Adjustment
    • OutputsPWM Current Control, Programmable outputs (if required)
    • MotorsUpto 4 Amps Stepper Motor
    • Controls motion of Stepper motor and precisely positions the tube for sealing. The controller starts on receiving start signal and runs the stepper till the mark sensor senses the mark on the tube. Speed of the motor can be adjusted as per user's requirement.
    ...more
  • Step Motor

    Step Motor

    Get Price Quote

    We are manufacturers of truly INDIAN stepper motor drives for complete range of stepper motors from 1 Amp to 6 Amp per phase. Full step, half step and microsteps too. Orion drives are time tested working on many-many machines for years together.
    ...more
  • Stepper Motor

    Stepper Motor

    Get Price Quote

    USAGES : Office Machines, Automatic Control Machines, Split Air Conditioner
  • Stepper Motion Controller

    Stepper Motion Controller

    Get Price Quote

    Stepper Motion Controller, Bipolar Stepper Driver, Electronic Spare Par
  • Geared Brake Combined Stepper Motors

    Geared Brake Combined Stepper Motors

    Get Price Quote

    Geared Brake Combined Stepper Motors, Five Phase Stepper Motor
  • Bipolar Stepper Motor

    Bipolar Stepper Motor

    Get Price Quote

    Bipolar Stepper Motor, Laser Dot Diode Module Red Copper Head Tub
  • 5-Phase Stepper Motor

    5-Phase Stepper Motor

    Get Price Quote

    5-Phase Stepper Motor, Three Phase CG AC Drive, Servo Motor
  • Stepper Motor Controller

    Stepper Motor Controller

    Get Price Quote

    Stepper Motor Controller, Power Saver, Temperature Scanner, Data Scanne
  • Stepper Motors

    Stepper Motors

    Get Price Quote

    Stepper Motors, Brushless DC Motor
  • Stepper Motors

    Stepper Motors

    Get Price Quote

    Stepper Motors, Pmdc Motor, Industrial Motor, Roller Moto
  • Stepper Can Stack Motors

    Stepper Can Stack Motors

    Get Price Quote

    Stepper Can Stack Motors, Stepper Hybrid Motor, Gear Head Motor
  • Stepper Motors

    Stepper Motors

    Get Price Quote

    We are offeing stepper motor is a brushless, synchronous electric motor that can divide a full rotation into a large number of steps. The motor's position can be controlled precisely, without any feedback mechanism. A step motor can be viewed as a synchronous ac motor with the number of poles (on both rotor and stator) increased, taking care that they have no common denominator. Electric stepper motors are used in industrial applications like high speed pick and place equipment and multi-axis machine cnc machines often directly driving lead screws or ballscrews, linear actuators, linear stages, rotation stages, goniometers, and mirror mounts. We are bulk exporting various kinds of motors including stepper motors, rotary stepper motors, electronic stepper motors, electric stepper motors, unipolar stepper motor, bipolar stepper motor and more.
    ...more
Filter by Locality
top