Teflon Tape Dealers in Andheri East, Mumbai

Main Features: Heat resistance property---It is able to work stably between -60°C to 260°C. Excellent non-sticky property---It is easier to remove those resin, dopes, oil and other sticky things. Good mechanical property with no distortion and low friction coefficient. Application: The film tapes could clings to the hot rollers for protecting form acid, alkali, and stains, etc. Being used in sealing of the hot plastic parts PTFE Silicone Adhesive Tape available in extruded and skived films. Any width in length of 36 yards. Standard Thickness of 100 microns and also in other thickness

Wind the tape by hand, using a constant minimal tension sufficient for the tape to take up the form of the thread. The tape should be wound in a helical fashion with a 50% overlap in the direction of the thread so that when the connection is completed the finishing end of the tape remains in position. The tape width should not exceed the length of the thread form.

• Thickness: 100 microns

The film tapes could clings to the hot rollers for protecting form acid, alkali, and stains, etc. PTFE Silicone Adhesive Tape available in extruded and skived films. Any width in length of 36 yards.

Flips®™ Sealon is a packing cord, a versatile gasket made of pure PTFE, and free from any additives.It is economical: cut off only the desired length from the spool. It usually costs, on a per-gasket basis, less than other gasketing alternative. There is no scrap or waste. Since there is no fitting or precutting, it has just to be pressed in place, saving on installation time, too. Since it is inert to most chemicals, it is perfect for the most challenging chemical applications. Easy InstallationFirst, clean surfaces of flanges. Form a ring by pressing Sealon around center of flange. The two ends should overlap 1 ~ 2 cm near a bolt hole. Reposition the other half of the flange and tighten up the bolts on diagonal line using equal pressure. During routine maintenance, flanges will part freely and Sealon will be easy to remove. Flips®™ Sealon with Adhesive TapeFlips®™ Sealon can be delivered with self-adhesive film on one side, covered with a paper film as backing. This makes sealing work easy: simply remove the paper backing from the self-adhesive film and the self-adhesive tape will hold the Sealon in place until permanently put in position by the pressure of e.g. bolts. PropertiesFlips®™ Sealon has excellent resistance of pressing, creep relaxation and cold flow. It can even seal damaged and uneven surfaces. It does not have any corrosion and is able to be stored without any time limits. When properly installed, Sealon becomes a thin, strong gasket with the ability to withstand high compressive loads. This, together with its resistance to creep and cold flow, helps Sealon maintain a high level of tightness over time. In most applications, after initial installation, there is no need to retorque, even at temperatures up to 600° F (315° C). ApplicationsFlips®™ Sealon is used in industries including: Chemical Manufacturing, Food Equipment Manufacturing, Pharmaceutical Plants, Petrochemical Production, Steel Manufacturing, Distilling, Food and Beverage Processing, Pulp and Paper Processing, Power Generation, Marine Applications. Sealon is used in virtually many types of sealing applications like: Pipe Flange Gaskets, Pipe Sealants, Fume Ducts, Concrete Lids, Tanks, Heat Exchangers, Pressure Containers, Cooling Towers, Reactors, Casings, Fiberglass-Reinforced Plastic Vessels, Various Lining Containers, Hydraulic and Pneumatic Systems, Sealing Gaskets for Large-Diameter Equipment. Since Sealon has a low stress to seal requirement, it also makes an effective gasket on delicate assemblies such as Glass, Plastic, FRP, Ceramic or Graphite.

• Color: White
• Country of Origin: India
• Brand Name: As needed

We provide best quality as per ur requirement 

Teflon tape are to be applied on the male threads and the pipe joint compound on the female threads, together this combination ensures a leak proof joint.

TFE Gasket Tape is a kind of dynamic seal. It is produced by braiding together, continuous tape of expanded PTFE. It has following qualities Extremely low coefficient of friction Non abrasion Excellent sealability Outstanding chemical resistance Does not hydrolyze Does not harden Temperature -160°C - +280°C Applications : PTFE gasket tape can be used in virtually all types of sealing applications throughout the industry.

PTFE PTFE Thread Seal Tape, Silicone Coated Fiberglass Tape