Temperature Sensors Dealers in Ghatkopar, Mumbai

Head:Cast aluminium / Stainless steel   Assembly :3 - Wire Simplex / 6-wire duplex   Temp.range:- 200° to 449°   Immersion length:300 MM/in multiple of 100 MM   Sheath Dia.:6 MM and MOC : SS 316

RTD'S are high precision device used to measure temperatures in corrosive and non-corrosive media. They work on the principle of variation of resistance of a sensing element, usually made of Platinum, with corresponding change in temperature. These RTD's are available in following types : PT100, PT200, PT500, & PT1000 (AS PER DIN 43760 OR BS904 CLASS II) Pt50 (as per JIS) Simplex or Duplex. THERMOCOUPLE : A thermocouple is a sensor for measuring temperature. It consists of two dissimilar metals, joined together at one end which produce a small unique voltage at a given temperature. This voltage is measured and interpreted by a thermocouple thermometer.   These thermocouples are available in three types of hot junctions : The Grounded Junction : Recommended for the measurement of static or flowing corrosive gas or liquid temperature and for high pressure application. The junctions are welded to the protective sheath giving faster response. An Underground Junction : Used for measurement in corrosive application where it is desirable to have the thermocouple electronically isolated form and shielded by a seath. The junction is physically isolated from the sheath from MgO powder. An Exposed Junction : It is used for the measurement of static or flowing non-corrosive gas temperature where fast response time is required. The junction extends beyond the protective seath to give accurate and fast response. The seath insulation is sealed where the junction extends to prevent penetration or moisture or gas which would cause.       Types of Assemblies available: Terminal Block Type/ Whether Proof IP 65 Or Flame Proof head mount Hand Held Type.  Mineral Insulated Metal Sheath.  Transition Joint Type.  Quick Disconnect.  Thermocouple with special outer sheaths like silicon Carbide, PTF, PVDF coated etc. Mountings: Fixed male threaded, addittion, Gland type, Nipple - Union, Nipple assembly or adjustable flanged types, Bayonet type and others. Insulations: Multibore ceramic tubing / Magesium Oxide (MgO filled) / M.I. Ordering informations for Thermocouples and RTDs: Operating Range, RTD/Thermocouple's type & Class - [ K / J / T / E / B / R / S - Simplex or Duplex, ] Specify Wire Gauge in case of Thermocouple,  Type of RTD Element & Class  Head Assembly Weatherproof / Ex. Proof, Seath Material - Length & O.D.,  Extension cable material - It's covering length, Process connection, Wire connection - 2 Wire / 3 Wire / 4 Wire                          

We are offering temperature sensors. Temperature sensors detect small differences between the temperature of an object and the surrounding ambient temperature. • works by detecting infrared energy that objects emit • senses temperature differences as small as 3° c, on moving or still products • senses from 0° to 300° c • available with analog or discrete outputs • allows threshold adjustment and real-time information display through a pc • requires no emitter or controller • uses remote or push-button programming • available in three models for different target sizes and distances • ideal for applications such as detecting hot parts, monitoring rollers, verifying that molded parts have been ejected and detecting hot glue

TEMP TECH manufacturers Resistance Temperature Detectors (RTD’s) confirming to all international Standards like IEC 751 , GOST, BS-1904, DIN 43760, JIS C1604, 1606 etc…. All types of configurations are available and most of the RTD’s are custom made. Accuracy in measurement of Temperature, faster response, sturdiness, ease in maintenance and replacement are the main criteria of desig

Standalone, Lube Fuel Oil Oil Contamination Deterioration Monitor has no moving parts , temperature compensated , one touch calibration, with two level alarm set points , Low Flow detection and Metallic dust (bearing metalmill scale etc) detection . Extremely easy & simple installation. Prevent Major breakdowns . Can be used with Diesel Engines, Turbines, Hydraulic Cranes, Separators Transformers etc. Contact us for a complete engineered solution.

TEMP TECH manufacturers Resistance Temperature Detectors (RTD’s) confirming to all international Standards like IEC 751 , GOST, BS-1904, DIN 43760, JIS C1604, 1606 etc…. All types of configurations are available and most of the RTD’s are custom made. Accuracy in measurement of Temperature, faster response, sturdiness, ease in maintenance and replacement are the main criteria of design.

Resistance Temperature Detectors (RTD’s) are temperature sensing devices consisting of a wire coil or deposited film of pure metal, usually platinum. The element’s resistance increases with temperature in a known and repeatable manner. RTD’s exhibit excellent accuracy over a wide temperature range. Non standard size can be manufactured on request.

The R&S®NRP power meter sensors have long been recognized for delivering supreme precision and speed. The R&S®NRPxxT and R&S®NRPxxTN power sensors take power measurements to the next level.

Mineral Insulated Thermocouples, Tabular Heating Elements, Oil Heate

Temperature Sensors, Heavy Duty Metal Sheathed Thermocouples, Sensor

Temperature Sensor, Tubular Level Indicator, Check Valve, Control Valv

Temperature Sensors, Data Sensors, Force Sensor

Temperature Control, Repairing Sensors, Maintenance Sensors, Controller

Pcs Non Contact Temperature Sensor, Hand Held Humidity Mete

Temperature Sensors, Electric Heat Tracing Cable

RTD Sensor, Fire Detectors, Heating Elements, Thermostat

X Ray Taken Using the Digital Senso

Temperature Sensors, Dew Point Meter, Moisture Measurement Product