Control Valves Dealers in Andheri, Mumbai (36 products available)

we are offering directional control valves 32 and 52 hand lever operated compact series type : hand lever operated, hand palm operated sizes: 3 mm , 6 mm & 10 mm (g18", g14" & g38") service : compressed air 43 hand rotary lever knob type | type : hrl 143 - lever operated rotary lever operated with detent sizes: 6 mm & 20 mm (g14" to g34") service : compressed air 52, 53 - pilot operated type : pp252-52 way | pph253-53 way double pilot valve with manual override sizes: 3 mm & 15 mm (g18" to g12") service : compressed air 32, 52 - pilot operated type : ps231-32 way | ps252-52 way single pilot spring return with manual override sizes: 3 mm & 15 mm (g18" to g12") service : compressed air

• Size:: 25NB - 400NB
• Rating :: 150, 300, 600, 900 & 1500 Class
• End Connection :: Flanged, Buttweld & Socketweld
• Material :: Cast Steel, Stainless Steel, Alloy Steel, Hastalloy, etc.

"SAFECON - Globe type Control valves are available for any control application. Built to take the punishment imparted by many processes, including extreme pressure drops, the valve is backed by the most respected name in the valve industry.

Our simple but rugged design DCVs have found wide acceptance in the industry for more than two decades as they can perform in the toughest of working environments. Directional Control Valves are available in sizes ranging from 1/8" to 1" BSP. These DCVs can be operated by a range of Manual, Machine, Solenoid or Pilot operations.

Nickel plated steel, wi th projection plate to prevent damage to tubing by end of screw, with hinged bottom bar for direct fitting and removed without access to ends of tube.AVALIABLE IN BRASS ALSO

• Material: Aluminum / WCB / Stainless Steel
• Size: 1 - 4 Inch
• Brand Name: TCS / Rotex

• Material: Stainless steel
• Connection Type: Thread
• Surface Type: Coated
• Inlet (mm): 65 mm
• Flanged (mm): 180 mm
• Outlet Size (mm): 50mm
• Pressure (Bar): 35Bar
• Flow Rate (L per min.): 15L per min.

Directional control valves are one of the most fundamental parts in hydraulic machinery as well as pneumatic machinery. They allow fluid flow into different paths from one or more sources. They usually consist of a spool inside a cylinder which is mechanically or electrically controlled. The movement of the spool restricts or permits the flow, thus it controls the fluid flow

• Pneumatic process and control systems: ¼” to 1” BSP and NPT threads

Our Hi Line pneumatic hand and foot operated valves are available in manual return and spring return type.

Adaptors & reducers, compression fittings, faucet & tap mixer, hose, barb, nipple, pex fittings, pipe fittings, ppr fittings, sanitary & plumbing fittings, valves & strainers, water meters,.

We Design, Manufacturers, supply, erection & commissioning of Cooling Towers of any capacity.we are the Supplier of spares for any make of Cooling Tower. Spares include FRP fans, GRP grids, treated timber, marine plywood, nozzle, flow control valve, gearbox etc. Spares are supplied as per OEM part number.

Description :-Nickel plated steel, wi th projection plate to prevent damage to tubing by end of screw, with hinged bottom bar for direct fitting and removed without access to ends of tube.AVALIABLE IN BRASS ALSO

Application: For use when an air pilot signal is required at a set hydraulic pressure. Can be used to shift valves, and start or stop pneumatic pumps. Attaches directly to control manifold or can be mounted “in-line” to read system hydraulic pressure. Automatically turns on an air pilot signal when a predetermined system pressure is reached. Has 1/4" NPTF male thread and 1/4" NPTF fitting for gauge mounting if required. Adjustable from 500-10,000 psi. Maximum rating of 25 scfm at 100 psi.  

• Size: ¼” to 2”

•Socket or But Weld or Screwed ends or Flanged using Weld Neck Flanges, Design as per API 602 BS EN ISO 15761, Class 800, 900, 1500 & 2500.

Application Rotolock valves are Compatible with all CFC, HCFC and HFC Refrigerants, mineral oils, Alkyl Benzene, POE lubricants and Industrial fluids non-corrosive to steel and brass. (With suitable Gland/Seal). Materials of construction Valve Body: Hot Forged Brass (BS-218). Rotolock sleeve: Hot Forged Brass (BS-218). Rotolock Nut: Hot Forged Brass (BS-218). Spindle: Stainless Steel 304. Gland Nut: Free cutting Brass Gland Packing: Graphite and Neoprene Seal Cap: Plated steel / ABS Seat : Stainless Steel 304 Rotolock Gasket: Teflon Springs: SS 304 Solder: Silver solder 42%   Design Forged Brass body and parts with SS 304 internal components minimize chances of corrosion in all conditions and allow easy brazing with copper tubes. All ports are integrally forged and the only brazed joint is the rotolock sleeve. This minimizes chances of leakage. Brass body and SS 304 floating internal seat allow metal to metal seating on dissimilar metals resulting in positive isolation and virtually lifelong durability. Stem with full back seating and graphite and neoprene seals allow gland packing to be changed in open position and brazing without disassembling the valve. No coatings are used on the Valve and internal parts. Graphite, Neoprene and Teflon seals are available as standard accessories. Operation & Testing. Maximum working pressure 450 psig. Working Temperature Range: (-30°C + 100°C). Individual pneumatic Testing in Open/Close position at 450 psig. Valves suitable for operation at 650 psig can also be provided on request.

• Testing :: API 6D / API 598
• Trims :: Varieties of combinations

Carbon Steel, Alloy Steel, Low Temperature carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, any other special material. • SOFT SEATED, • Soft seat for tight shut-off, • Lesser weight, • smaller size and lesser force to open. -

United Van Der Horst now offers control valves of reputed manufactures as a part of comprehensive hydraulic cylinder. Based on our experience in the industry we source and also stock all types of valves aa directional control valves, flow control valves, pressure control valves, check valves, non return valves and throttling valves etc.

Pressure Control Valves, Metal Pipes, Tubes, Industrial Valves

The CGV Series control valves are suitable for handling steam and water. The valve body is designed for smooth flow profile, which minimizes pressure loss and provides better Cv and rangeability.

• Brand Name: None
• Single gross weight: 0.4 kg
• Delivery Time: 7 Days For Normal Quantity
• Place of Origin: Shanghai, China (Mainland)
• Packaging: Paper Box & Plastic Bag
• Quality Control: Defective Rate <1.0%
• Single package size  : 16X7X5.5 cm

ELECTRIC ACTUATED BUTTERFLY VALVES, solenoid valve coils

• Seat: Screwed type replaceable.

Gland Packing:Carbon filled Teflon for temp. Upto 220°C. Leakage :As per ASME 16.104 CI. IV (0.01% of Kv) for 5512A Series and Class VI Bubble tight for 5512B Series.Body Material:SG Iron-ASTM A536,Gr.60-40-18 (DIN 0.7043) (GGG40.3). CS-ASTM A 216 WCB, (DIN 1.0619 GS-C 25). SS-ASTM A351CF8M (DIN1.4408) (GX6 Cr.Ni MO1810) SS-ASTM A351CF8 (DIN1.4301).

Pneumatic Actuators Electric Actuators Hydraulic Actuators Control Valves

• Material: Cast Iron
• Country of Origin: Made in India
• Valve Type: Control Valve
• Body Style: Globe Type
• Pressure: 20psi
• Temperature: 140Degree Celsius
• Fluid Media: Air
• Features: Proper Lubrication And Use For Durability Of This Cylinders

The CGV Series control valves are suitable for handling steam and water. The valve body is designed for smooth flow profile, which minimizes pressure loss and provides better Cv and rangeability.

Flush Bottom Valves are used for process materials discharging applications. These angle-type flush bottom valves are designated for two values and two types of construction.The first value is the inlet flange connection size which is fixed to the tank or vessel’s bottom pad, and the second value is the size of the port and the outlet flange which is connected to the pipe. Better flow capacity for line size, Tight closing for reliable shut-off even if change in pressure and temperature are sudden and extreme, Unique packing designs to suit various temperature and fluid needs.

Angle Seat Valve, fertilizer plant, cement grinding plant, gas valves

Water supply valve

On / Off Control Valve Low Temperature Valves, Weather Proof Limit Switch Box

Water Heater Relief Valve, car tool kit, spring retainer, Gas Tunnel Oven